Schroeder, Anthony | Search NASA

DOE OSTI2023

Carburization behavior of FeCrAl alloy APMT and the critical role of pre-oxidation

The carburization behavior of bare and pre-oxidized APMT has been assessed after long-term graphite exposure at 1000 °C. Bare coupons formed a thick scale after graphite exposure due to carbon interaction and chromium-rich carbides were detected, as predicted from thermodynamic calculations. Additionally, pre-oxidation of APMT was conducted in air, and oxidation kinetics were measured through thermogravimetry. The oxide layer formed at 800 °C failed to prevent carburization. However, increasing the pre-oxidation temperature to 1200 °C produced an oxide layer with good resistance to carbon diffusion indicating that the alpha-alumina formed at high temperatures is key in preventing carburization of the material.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Corrosion resistive materials, systems, and methods of forming and using the materials and systems

A method to reduce corrosion rates of materials at high temperatures may include heating a mixture and applying the heated mixture to a material to be rendered thermodynamically noble. The mixture may include carbon monoxide and carbon dioxide and the material rendered thermodynamically noble may include copper or other material having similar physical properties. The copper or other similar material may be applied to a structural material and provide a surface interfacing with the mixture of carbon monoxide and carbon dioxide to prevent corrosion of the structural material. In some cases, the structural material may form a heat exchanger defining passageways for a working fluid of a power system and/or may form other passageways of the power system. The copper may be applied to the passageways as a protective coating and then made thermodynamically noble at high temperatures after interactions with the mixture of carbon monoxide and carbon dioxide.

Anderson, Mark↗