Search NASA⌕ Search

Engineering topics

Schuller, Jon A.

Publications and source records attributed to Schuller, Jon A..

At least 19 records

Passive radiative thermal management using phase-change metasurfaces

Abstract Realizing innovative composite materials with passive thermal management capabilities and minimal ecological footprints is a challenging but much sought-after goal that would have a transformative effect on renewable energy sciences. We demonstrate an environmentally friendly metasurface utilizing vanadium dioxide (VO 2 ) that offers responsiveness to ambient temperature and potentially long-term stability. The metasurface enables passive thermal management by self-adjusting its absorptivity and emissivity response over a broad bandwidth ranging from visible to mid-infrared (IR) wavelengths. Above the VO 2 phase transition the metasurface exhibits increased mid-IR emissivity and reduced visible/near-IR absorptivity, creating an efficient radiative emission channel in the first atmospheric transparency window with reduced absorption of solar radiation. In contrast, below VO 2 ’s transition temperature, the metasurface increasingly absorbs sun light while minimizing mid-IR radiative heat losses. Moreover, a functional silicon layer eliminates the need for an additional capping layer commonly employed to protect VO 2 from environmental degradation. The additional protective layer often impedes the use and performance of VO 2 based devices in terrestrial as well as spacecraft applications. Therefore, the proposed durable and eco-friendly metasurface will be an excellent candidate for essential passive thermal regulation systems across residential and terrestrial applications.

42 ENGINEERING↗

Roadmap for Optical Metasurfaces

Metasurfaces have recently risen to prominence in optical research, providing unique functionalities that can be used for imaging, beam forming, holography, polarimetry, and many more, while keeping device dimensions small. Despite the fact that a vast range of basic metasurface designs has already been thoroughly studied in the literature, the number of metasurface-related papers is still growing at a rapid pace, as metasurface research is now spreading to adjacent fields, including computational imaging, augmented and virtual reality, automotive, display, biosensing, nonlinear, quantum and topological optics, optical computing, and more. At the same time, the ability of metasurfaces to perform optical functions in much more compact optical systems has triggered strong and constantly growing interest from various industries that greatly benefit from the availability of miniaturized, highly functional, and efficient optical components that can be integrated in optoelectronic systems at low cost. This creates a truly unique opportunity for the field of metasurfaces to make both a scientific and an industrial impact. Furthermore, the goal of this Roadmap is to mark this “golden age” of metasurface research and define future directions to encourage scientists and engineers to drive research and development in the field of metasurfaces toward both scientific excellence and broad industrial adoption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancing and Extinguishing the Different Emission Features of 2D (EA(1-)(x)FA(x))(4)Pb3Br10 Perovskite Films

2D hybrid perovskites are attractive for optoelectronic devices. In thin films, the color of optical emission and the texture of crystalline domains are often difficult to control. Here, a method for extinguishing or enhancing different emission features is demonstrated for the family of 2D Ruddlesden-Popper perovskites (EA(1-)(x)FA(x))(4)Pb3Br10 (EA = ethylammonium, FA = formamidinium). When grown from aqueous hydrobromic acid, crystals of (EA(1-)(x)FA(x))(4)Pb3Br10 retain all the emission features of their parent compound, (EA)(4)Pb3Br10. Surprisingly, when grown from dimethylformamide (DMF), an emission feature, likely self-trapped exciton (STE), near 2.7 eV is missing. Extinction of this feature is correlated with DMF being incorporated between the 2D Pb-Br sheets, forming (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y). Without FA, films grown from DMF form (EA)(4)Pb3Br10, retain little solvent, and have strong emission near 2.7 eV. Slowing the kinetics of film growth strengthens a different emission feature, likely a different type of STE, which is much broader and present in all compositions. Films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) have large, micron-sized domains and homogeneous orientation of the semiconducting sheets, resulting in low electronic disorder near the absorption edge. The ability to selectively strengthen or extinguish different emission features in films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) reveals a pathway to tune the emission color in these compounds.

2D halide perovskites↗

Optical-Frequency Magnetic Polarizability in a Layered Semiconductor

The optical response of crystals is most commonly attributed to electric dipole interactions between light and matter. Although metamaterials support “artificial” magnetic resonances supported by mesoscale structuring, there are no naturally occurring materials known to exhibit a nonzero optical-frequency magnetic polarizability. Here, we experimentally demonstrate and quantify a naturally occurring nonzero magnetic polarizability in a layered semiconductor system: two-dimensional (Ruddlesden-Popper phase) hybrid organic-inorganic perovskites. These results demonstrate the only known material with an optical-frequency permeability that differs appreciably from vacuum, informing future efforts to find, synthesize, or exploit atomic-scale optical magnetism for novel optical phenomena such as negative index of refraction and electromagnetic cloaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth-Controlled Broad Emission in Phase-Pure Two-Dimensional Hybrid Perovskite Films

Two-dimensional hybrid metal halide perovskites (2D perovskites) are attractive for light-emitting devices and other applications because their emission is tunable across the visible spectrum. The emission profile of 2D perovskites can be broadened via a variety of mechanisms and is further complicated by the presence of impurities. Here, the challenge of making phase-pure films in Ruddlesden–Popper phases [(A') 2 (A) n–1 B n X 3n+1 structure] is overcome by using a single A/A'-site cation, ethylammonium (EA), whose optimal size also prohibits the formation of off-target phases. In the (EA) 2 (EA) n–1 Pb n Br 3n+1 family, the low-energy, broad emission observed in bulk crystals is reduced in spin-cast, polycrystalline films. This decrease in broad emission, attributed to phonon-mediated processes, is correlated with the strain in polycrystalline films that is observed by X-ray scattering. Photothermal deflection spectroscopy shows that strain also increases the electronic disorder near the free exciton absorbance. Broad emission in films can be recovered by slowing growth kinetics, which removes the strain acquired from spin-casting and increases the domain size. Furthermore, these results help extend the utility of 2D perovskites by suggesting design rules for the growth of thin films with the targeted phase and emission.

36 MATERIALS SCIENCE↗

Cation and anion topotactic transformations in cobaltite thin films leading to Ruddlesden-Popper phases.

Topotactic transformations involve structural changes between related crystal structures due to a loss or gain of material while retaining a crystallographic relationship. The perovskite oxide La0.7Sr0.3CoO3 (LSCO) is an ideal system for investigating phase transformations due to its high oxygen vacancy conductivity, relatively low oxygen vacancy formation energy, and strong coupling of the magnetic and electronic properties to the oxygen stoichiometry. While the transition between cobaltite perovskite and brownmillerite (BM) phases has been widely reported, further reduction beyond the BM phase lacks systematic studies. In this paper, we study the evolution of the physical properties of LSCO thin films upon exposure to highly reducing environments. We observe the rarely reported crystalline Ruddlesden-Popper phase, which involves the loss of both oxygen anions and cobalt cations upon annealing where the cobalt is found as isolated Co ions or Co nanoparticles. First-principles calculations confirm that the concurrent loss of oxygen and cobalt ions is thermodynamically possible through an intermediary BM phase. The strong correlation of the magnetic and electronic properties to the crystal structure highlights the potential of utilizing ion migration as a basis for emerging applications such as neuromorphic computing.

Chiu, I-Ting↗

Ferroelastic Hysteresis in Thin Films of Methylammonium Lead Iodide

Mechanical strain can modify the structural and electronic properties of methylammonium lead iodide MAPbI 3 . The consequences of ferroelastic hysteresis, which involves the retention of structural memory upon cycles of deformation, are reported for polycrystalline thin films of MAPbI 3 . Repeatedly bent films were examined using grazing incidence wide-angle X-ray scattering (GIWAXS) to quantitatively characterize the strains and proportions of twin domains. Approximate locations for the coercive stress and saturation on the ferroelastic stress–strain curve are identified, and changes to the stress–strain curve with cyclic strain are characterized. Notably, an external stress source, such as thermal stress from the substrate or a roll-to-roll printing setup, must apply at least |50| MPa to modify the proportions of different twins. The presence of specific twin domains is found to correlate to previously reported strain and defect heterogeneity in MAPbI 3 films. Domains from differently strained twin sets interact with each other. Long-term stability testing reveals that the domain walls are highly immobile over extended periods. Nucleation of new domain walls occurs for specific mechanical strains and correlates closely with degradation. Furthermore, these results help to explain the behavior of ion migration, degradation rate, and photoluminescence in thin films under compressive and tensile strain.

Defects↗

Widely Tunable Optical and Thermal Properties of Dirac Semimetal Cd 3 As 2

In this paper, a detailed analysis of the temperature-dependent optical properties of epitaxially grown cadmium arsenide (Cd 3 As 2 ), a newly discovered 3D Dirac semimetal is reported. Fermi level tuning—instigated from Pauli-blocking in the linear Dirac cone—and varying Drude response, generate large variations in the mid- and far-infrared optical properties. Thermo-optic shifts larger than those of traditional III–V semiconductors are demonstrated. Electron scattering rate, plasma frequency edge, Fermi level shift, optical conductivity, and electron effective mass analysis of Cd 3 As 2 thin-films are quantified and discussed in detail. The ab initio density functional study and experimental analysis of epitaxially grown Cd 3 As 2 promise applications for nanophotonic and nanoelectronic devices, such as reconfigurable metamaterials and metasurfaces, nanoscale thermal emitters, and on-chip directional antennas.

36 MATERIALS SCIENCE↗

Bright magnetic dipole radiation from two-dimensional lead-halide perovskites

Light-matter interactions in semiconductors are uniformly treated within the electric dipole approximation; multipolar interactions are considered “forbidden.” We experimentally demonstrate that this approximation inadequately describes light emission in two-dimensional (2D) hybrid organic-inorganic perovskites (HOIPs), solution processable semiconductors with promising optoelectronic properties. By exploiting the highly oriented crystal structure, we use energy-momentum spectroscopies to demonstrate that an exciton-like sideband in 2D HOIPs exhibits a multipolar radiation pattern with highly directed emission. Electromagnetic and quantum-mechanical analyses indicate that this emission originates from an out-of-plane magnetic dipole transition arising from the 2D character of electronic states. Symmetry arguments and temperature-dependent measurements suggest a dynamic symmetry-breaking mechanism that is active over a broad temperature range. These results challenge the paradigm of electric dipole–dominated light-matter interactions in optoelectronic materials, provide new perspectives on the origins of unexpected sideband emission in HOIPs, and tease the possibility of metamaterial-like scattering phenomena at the quantum-mechanical level.

42 ENGINEERING↗

Chemical and Structural Diversity of Hybrid Layered Double Perovskite Halides

Hybrid halide double perovskites are a class of compounds attracting growing interest due to their richness of structure and property. Two-dimensional (2D) derivatives of hybrid double perovskites are formed by the incorporation of organic spacer cations into three-dimensional (3D) double perovskites. Here, we report a series of seven new layered double perovskite halides with propylammonium (PA), octylammonium (OCA), and 1,4-butyldiammonium (BDA) cations. The general formulas of the compounds are A m M I M III X 8 (single-layered Ruddlesden–Popper type with m = 4 and A = PA or OCA, and single-layered Dion–Jacobson type with m = 2 and A = BDA, M I = Ag, M III = In or Bi, X = Cl or Br) and PA 2 Cs M I M III Br 7 (bilayered, with M I = Ag, M III = In or Bi). These families of compounds demonstrate significant versatility, with tunable layer thickness, the ability to vary the interlayer spacing, and the ability to selectively tune the band gap by varying the M I and M III cations along with the halide anions. The band gap of the single-layered materials varies from 2.41 eV for PA 4 AgBiBr 8 to 3.96 eV for PA 4 AgInCl 8 . Photoluminescent emission spectra of the layered double perovskites at low-temperature (100 K) are reported, and density functional theory electronic structure calculations are presented to understand the nature of the band gap evolution. The development of new structural and compositions in layered double perovskite halides enhances the understanding of structure–property relations in this important family.

36 MATERIALS SCIENCE↗

Controlling Solvate Intermediate Growth for Phase-Pure Organic Lead Iodide Ruddlesden–Popper (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) n -1 Pb n I 3 n +1 Perovskite Thin Films

The growth of Ruddlesden-Popper perovskite thin films is complicated by the existence of multiple crystallization pathways available to precursors in solution. During conventional thin film growth processes, such as spin-coating or blade-coating, solvents can evaporate too quickly to clearly resolve different reaction intermediates and products that form during crystallization. Here, we resolve multiple reaction products and intermediates that form during Ruddlesden-Popper phase growth by studying drop-cast precursor solutions in situ through the evolution of X-ray diffraction, photoluminescence, and optical micrographs over long timescales in a thin film geometry. We found that methylammonium-rich solvate intermediates play a crucial role in directing the bulk optical properties of the films, and form simultaneously with smaller regions of Ruddlesden-Popper phases during growth. The microstructure and optical properties of these sub-phases were characterized during growth and after annealing, revealing that discrepancies between thin film and single-crystal optical properties originate from solvate intermediates. These lower band-gap solvate-mediated minority phases dominate the optical emission spectrum by means of rapid energy migration, and contribute to sub-band-gap electronic states in photovoltaic devices. Processing routes to yield thin films with optical properties similar to single crystals of Ruddlesden-Popper phases were developed by tuning the precursor stoichiometry and deposition kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase Stability and Diffusion in Lateral Heterostructures of Methyl Ammonium Lead Halide Perovskites

Mixed-halide hybrid organic inorganic perovskites have band gaps that span the visible spectrum making them candidates for optoelectronic devices. Diffusion of the halide atoms in methyl ammonium lead iodide (MAPbI 3 ) and its alloys with bromine has been observed in both dark and under illumination. While halide transport upon application of electric fields has received much attention, less is known regarding bromide and iodide interdiffusion down concentration gradients. This work provides an upper bound on the bromide-iodide interdiffusion coefficient $D_i$, in thin films of (MAPbBr x I 1-x ) 3 using a diffusion couple of a lateral heterostructure. The upper bound of $D_i$ was extracted from changes in the interface profiles of the heterostructures upon exposure to heat. The stability of thoroughly-heated interfacial profiles suggests that the miscibility gap extends to higher temperatures and to a higher fractional composition of bromine than predicted by theory. The results of this work provide guidance for compositions of thermally stable heterostructures of hybrid halide perovskites.

36 MATERIALS SCIENCE↗

Phase Intergrowth and Structural Defects in Organic Metal Halide Ruddlesden–Popper Thin Films

Organic metal halide Ruddlesden–Popper phases combine the excellent optoelectronic properties of three-dimensional, bulk hybrid perovskites with superior material stability in ambient conditions. However, the thin film structure of these layered perovskites is still poorly understood, as phase purity is typically determined solely by specular X-ray diffraction. The thin film structure of these Ruddlesden–Popper phases was examined by increasingly local characterization techniques. It is difficult to assess the phase purity by purely bulk optical and diffraction measurements. From the comparison of grazing-incidence wide angle X-ray scattering (GIWAXS) patterns of cast films to expected scattering from single-crystal structures, significant in-plane disorder was observed. Spatially localized photoluminescence measurements show that films do not phase separate on the micrometer-scale. Selected area electron diffraction measurements show the intergrowth of different phases within the same thin film, consistent with previous observations seen in epitaxially-grown Ruddlesden–Popper complex oxides. Despite the presence of phase impurities that would typically be detrimental for device performance, fits to photothermal deflection spectroscopy measurements show relatively low Urbach energies of 33 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 2 Pb 3 I 10 and 32 meV for (C 4 H 9 NH 3 ) 2 (CH 3 NH 3 ) 3 Pb 4 I 13 , indicating that the electronic properties are insensitive to the phase impurities.

36 MATERIALS SCIENCE↗

Recent advances in two-dimensional materials beyond graphene

The isolation of graphene in 2004 by peeling apart the atomically-thin sheets that comprise graphite was a defining moment for the birth of a field: Two-dimensional (2D) materials. In recent years, there has been a rapidly increasing number of papers focusing on non-graphene layered materials, including transition-metal dichalcogenides (TMDs), because of the new properties and applications that emerge upon 2D confinement. Here we review significant recent advances and important new developments in 2D materials beyond graphene . We provide insight into the theoretical modeling and understanding of the van der Waals forces that hold together the 2D layers in bulk solids, as well as their excitonic properties and growth morphologies. Additionally, we highlight recent breakthroughs in TMD synthesis and characterization and discuss the newest families of 2D materials, including monoelement 2D materials (i.e., silicene, phosphorene, etc.) and transition metal carbide- and carbon nitride-based MXenes. We then discuss the doping and functionalization of 2D materials beyond graphene, which enable device applications, followed by advances in electronic, optoelectronic, and magnetic devices and theory. In conclusion, we provide perspectives on the future of 2D materials beyond graphene.

36 MATERIALS SCIENCE↗