Massively parallel modeling of electromagnetic field in conductive media: An MPI-CUDA implementation on Multi-GPU computers
Not Available
Tu, Xiaolei (ORCID:0000000257345558)↗
Engineering topics
Schultz, Adam
Publications and source records attributed to Schultz, Adam.
De-risking superhot EGS development through 3D play fairway analysis: Methodology development and application at Newberry Volcano, Oregon, USA
The DErisking Exploration for multiple geothermal Plays in magmatic ENvironments (DEEPEN) project aims to de-risk exploration of geothermal plays in magmatic systems, with a focus on superhot and supercritical geothermal systems. This article presents advancements in geoscientific assessment of superhot enhanced geothermal system (EGS) resources as part of the DEEPEN project, particularly in exploration and identification of these systems. While there exists a general consensus on key components of conventional hydrothermal systems, there has not been a prior consensus on such components for EGS, let alone superhot EGS. The DEEPEN project identified these key components for superhot EGS plays, and used them to modify the traditional geothermal play fairway analysis (PFA) approach to identify favorable areas in superhot EGS plays in 3D. This was done through modeling both favorability and uncertainty separately for each key component of a superhot EGS play, incorporating diverse 3D geoscientific datasets, including geologic features, models produced from direct observations, single inversions, and joint inversions. The PFA is applied to Newberry Volcano as a form of validation. Finally, the results appear to validate the methodology, aligning with expectations derived from conceptual modeling, and highlighting the area targeted for EGS stimulation well NWG 55-29 as favorable, and suggesting potential additional areas worthy of exploration at Newberry.
15 GEOTHERMAL ENERGY↗
Exploring for Superhot Geothermal Targets in Magmatic Settings: 2022 Field Campaign at Newberry Volcano
This paper presents preliminary results from a subset of work carried out as part of a multinational research project entitled DErisking Exploration for multiple geothermal Plays in magmatic ENvironments (DEEPEN), supported by the U.S. Department of Energy (DOE) and Geothermica, a joint effort by EU member states and associated countries. The DEEPEN project will develop a customized approach to exploration for supercritical and superhot geothermal plays in magmatic systems, which will be applied to two demonstration sites. This paper summarizes field activities carried out at the U.S. demonstration site, Newberry Volcano in central Oregon. The objective of this work effort is to refine the subsurface model of Newberry Volcano, with special focus on deeper zones including the magmatic plumbing system and other key geologic elements. New data collection included gravity and wideband magnetotelluric (MT) surveys, as well as reinstallation of a seismic network. The National Renewable Energy Laboratory (NREL) and Enthalpion Energy LLC (Enthalpion) worked with the Deschutes National Forest Fort Rock District to use a low ground disturbance method of MT deployment to collect MT data inside the caldera and other restricted areas inside the National Volcanic Monument. This opened these areas to geophysical exploration for the first time in decades. Sites along and adjacent to the south rim of the volcano constituted the primary survey objectives. A team from Lawrence Berkeley National Laboratory (LBNL), the U.S. Geological Survey (USGS), and AltaRock also began the process of reinstalling the seismic network from the AltaRock enhanced geothermal system (EGS) demonstration in anticipation of further development activities at the site. The data ingestion, reduction, and analysis phase of the project is ongoing. We are currently processing the MT and gravity data and are developing a new, highly GPU-accelerated, 3D joint MT and gravity inversion to better localize the south rim/south flank conductive target and better understand its relationship to deep heat, fluid sources, and surface extrusive features. Joint inversions, which have not yet been undertaken at Newberry, will allow us to obtain constraints on the geologic model that cannot be determined from each method in isolation, improving our ability to image key geologic features at depth.
geophysics↗
Optimizing Rate of Penetration and Tripping Decision-Making using Real-Time Bit Wear Monitoring While Drilling Geothermal Wells
Understanding bit wear while drilling is critical to minimizing non-productive time (NPT) and optimizing rate of penetration (ROP). Lengthening drilling runs with damaged bits does not only lower the ROP, but also elevates the risk of inducing severe bit damage, which could potentially lead to time-consuming fishing operations. When drillers believe the bit has worn off substantially, the bit is tripped out to be replaced. On geothermal wells, tripping can take up to 20% of the overall well construction time, and this is generally acknowledged as an opportunity for improvement. Ideally, a bit run should be terminated before the bit is damaged beyond repair. At the same time, premature bit pulls are to be avoided as well. This study aims to leverage bit and tooth wear metrics that can be obtained in real time to characterize bit condition in order to optimize ROP and determine the optimal time to pull the bit. Two metrics were explored in this study: a bit wear metric that incorporated depth-of-cut, and a tooth wear metric developed by Bourgoyne & Young characterizing the state of bit teeth dull. Both metrics were computed using recorded data from 12¼ inches roller cone insert bit runs in five geothermal wells targeting a granodiorite formation in the western United States. Together with the actual dull grades, determined after the bits were pulled to surface, the metric trends were interpreted to characterize the downhole bit condition and identify the point at which the bit should have optimally been tripped out. The insights from studying the actual dull grades and how they relate to the two metrics were used to establish a reliable bit pull criterion. The bit wear metric trend correctly showed a noticeable departure from baseline for bits experiencing major dulling behavior. Additionally, the tooth wear model predicted the cutter dull within two dull grades for most runs, with better performance in predicting the inner teeth dull. Moreover, the combination of the bit wear and tooth wear metrics was effective in revealing the cause of the bit performance impairment. Proactive tracking of these two metrics in real-time can facilitate geothermal drilling ROP optimization and better-informed tripping decision-making, thereby avoiding wasted time and cost.
Ashari, Rahmat↗
Newberry Volcano magnetotelluric impedance data
This submission includes all magnetotelluric (MT) transfer functions acquired during the 2014 EGS stimulation at Newberry Volcano in central Oregon as well as previously acquired MT data for the overall volcano. Plots of all data are provided (including forward response from a model used in a publication now in review in G-cubed). Also included is a kmz file giving all station locations.
3D↗