Engineering topics
Schultz, D
Publications and source records attributed to Schultz, D.
Flat ATIR Optics Approach to CPV: December 3, 2009 - December 3, 2010 (Revised)
An agglomeration of factors has stifled the economic promise of CPV technology. Foremost among these factors are: insufficient optical efficiency, misfit with existing solar infrastructure and production capabilities, and inadequate reliability of the optic-receiver pairing. These difficulties are largely driven by the choice of optics. The CPV industry is constrained in a paradigm of bulkyreflective or refractive optics that operate best at either low concentration (2-5X) or high concentration (100X and above). Low concentration approaches are plagued by marginal economics, while high concentration approaches face heightened technical risks. High concentration systems inevitably face thermal management hurdles and often do not fit well with the existing solar infrastructure.Using Aggregated Total Internal Reflection (ATIR) as the optical mechanism for gathering light, a cost effective, line-focus optic can be produced at scale to provide superior optical efficiency in a flat profile and operate at a mid level of concentration to mitigate the tradeoff between economic benefit and adoptability. Substantiating this motivational premise behind the ATIR optics approachto CPV requires performance data. Foremost among the goals for establishing the viability of ATIR optics in solar is demonstrating optical efficiency. Banyan Energy performed an outdoor test of optical efficiency (OE) based on short circuit current using the line-focus Lens Step prototype.
X-ray Studies of the Interface Between Two Polar Liquids: Neat and with Electrolytes
We demonstrate the use of X-ray reflectivity to probe the electron density profile normal to the interface between two polar liquids. Measurements of the interfacial width at the neat nitrobenzene/water and the neat water/2-heptanone interfaces are presented. These widths are consistent with predictions from capillary wave theory that describe thermal interfacial fluctuations determined by the tension and bending rigidity of the interface. Variation of the temperature of the water/nitrobenzene interface from 25 C to 55 C indicates that the role of the bending rigidity decreases with increasing temperature. X-ray reflectivity measurements of the electrified interface between an aqueous solution of BaCl{sub 2} and a nitrobenzene solution of TBATPB demonstrate the sensitivity of these measurements to the electrolyte distribution at the interface. A preliminary analysis of these data illustrates the inadequacy of the simplest, classical Gouy-Chapman theory of the electrolyte distribution.
The K-shell Auger Electron Spectrum of Gadolinium Obtained using Neutron Capture in a Solid State Device
N/A