Engineering topics

Schultz, P. H.

Publications and source records attributed to Schultz, P. H..

89 records · Page 5

NASA NTRS1979

Calculational investigation of impact cratering dynamics - Early time material motions

Early time two-dimensional finite difference calculations of laboratory-scale hypervelocity (6 km/sec) impact of 0.3 g spherical 2024 aluminum projectiles into homogeneous plasticene clay targets were performed and the resulting material motions analyzed. Results show that the initial jetting of vaporized target material is qualitatively similar to experimental observation. The velocity flow field developed within the target is shown to have features quite similar to those found in calculations of near-surface explosion cratering. Specific application of Maxwell's analytic Z-Model (developed to interpret the flow fields of near-surface explosion cratering calculations), shows that this model can be used to describe the flow fields resulting from the impact cratering calculations, provided that the flow field center is located beneath the target surface, and that application of the model is made late enough in time that most of the projectile momentum has been dissipated.

Thomsen, J. M.↗

NASA NTRS1979

Effects of lift force on ejecta transport

The possible effects of lift on individual ejecta trajectories after an impact event are examined, considering a dimensionless transport parameter (K), the initial velocity vector of the particles, and the ratio of the lift to drag coefficients. If this ratio is not equal to zero, the trajectory is greatly influenced by the lift coefficient, particularly for large values of K and high launch angles. It is suggested that lift potentially can affect small ejecta in the size range also affected by aerodynamic drag, thereby adding complexity to atmospheric effects discussed by Schultz and Gault (1978).

Pai, S. I.↗

NASA NTRS1979

Evidence for ancient mare volcanism

The results of the present study suggest that dark-haloed impact craters are indicative of excavated mafic materials, originally emplaced as volcanic units, but subsequently buried by impact ejecta deposits from large craters and basins. Consequently, mapped light plains units should be viewed as soil units that may not reflect the origin of the underlying rock. Some observations which support these conclusions are examined.

Schultz, P. H.↗

NASA NTRS1978

Floor-fractured craters on the moon and Mars

Impact craters on the moon provided primary pathways for volcanic eruptions through shock-induced fractures that immediately or subsequently tap magma reservoirs. Evidence for this process includes unbreached lava-filled craters and fractured crater floors with associated eruptives. Over 200 craters with floor fractures have been identified on the moon. They commonly occur along the margins of irregular maria, thereby suggesting a link to this important phase of lunar volcanism. Topographic data reveal small elevation differences between the summit of the remnant central peaks and crater rim, and in many cases suggest that floor fracturing resulted from a tabular intrusion localized beneath the crater with uplift of the crater floor. A comparison of lunar and Martian crater photographs shows that some Martian craters also exhibit similar highly localized endogenic modifications.

Schultz, P. H.↗

NASA NTRS1978

Martian intrusions - Possible sites and implications

Both the Moon and Mars exhibit volcanic modification of impact craters characterized by subfloor intrusions that either lift the old crater floor or result in extrusions of lava. Endogenic modification of martian craters, however, probably has involved interactions between such intrusive bodies and permafrost, as suggested by differences between lunar and martian floor-fractured craters. Such interactions raise the interesting possibility for hydrothermally concentrating ores in a manner analogous to the Sudbury structure on the Earth that may be consistent with interpretations of Viking lander results.

Schultz, P. H.↗

NASA NTRS1978

An alternative model for the Manicouagan impact structure

Geologic evidence suggests that the 210 million year old Manicouagan impact structure of eastern Quebec is an endogenically altered crater analogous to many lunar floor-fractured craters. According to this hypothesis, the impact at Manicouagan formed a transient cavity 80 km in diameter, generating melted target material which created a pool about 65 km in diameter in the bottom of the crater. Collapse of the transient crater rim and formation of a central peak-ring complex about 15 km in diameter subsequently occurred. Intrusion of a tabular magmatic body into the fractured and brecciated rock below the crater took place before recent glaciation; the intrusion caused an outer ring fracture around the crater.

Orphal, D. L.↗

NASA NTRS1978

Orbital infrared observations of lunar craters and possible implications for impact ejecta emplacement

The Apollo 17 Scanning Infrared Radiometer experiment showed that the ejecta deposits of large lunar craters (D greater than 3 km) typically exhibit uniform nighttime temperatures comparable to or less than those of the surrounding mare plains. This thermal signature implies that the surface of ejecta deposits displays block sizes typically smaller than 30 cm and that the nonblocky surface extends out to three crater radii from the crater rim. Four mechanisms are proposed to account for the observed thermal signatures.

Schultz, P. H.↗

NASA NTRS1977

Endogenic modification of impact craters on Mercury

The presence of internally modified impact craters on Mercury's surface may be used to evaluate the possibility of Mercurian volcanism. Such craters are similar to the floor-fractured and mare-filled craters observed on the moon. Mariner-10 images show that most such craters occur, as on the moon, near plains-filled basins. Color-ratio images have indicated that some Mercurian craters manifest red plains materials on their floors. These features may be associated with lava analogous to mare basalts in some lunar craters, or with compositionally distinct subsurface material preserved within the impact crater. Several basins manifest photometric contrasts between basin exteriors and basin-filling plains. Dark haloes are observed around some impact craters superimposed on the interior plains. This suggests the excavation of compositionally distinct material. Some possible endogenic features are discerned, despite the poor surface resolution, such as irregular rimless depressions. It is felt that volcanism may have occurred on Mercury, and that in some areas it may be similar to that of the lunar Mare Australe region.

Schultz, P. H.↗

NASA NTRS1977

Interpreting statistics of small lunar craters

Some of the wide variations in the crater-size distributions in lunar photography and in the resulting statistics were interpreted as different degradation rates on different surfaces, different scaling laws in different targets, and a possible population of endogenic craters. These possibilities are reexamined for statistics of 26 different regions. In contrast to most other studies, crater diameters as small as 5 m were measured from enlarged Lunar Orbiter framelets. According to the results of the reported analysis, the different crater distribution types appear to be most consistent with the hypotheses of differential degradation and a superposed crater population. Differential degradation can account for the low level of equilibrium in incompetent materials such as ejecta deposits, mantle deposits, and deep regoliths where scaling law changes and catastrophic processes introduce contradictions with other observations.

Schultz, P. H.↗

NASA NTRS1976

Floor-fractured lunar craters

Observational data concerning floor-fractured craters on the lunar near and far sides are examined, including the morphologic classification of the craters, their spatial and size distributions, and their floor, peak, and rim elevations relative to the maria. Six morphologic classes and two subclasses are delineated on the basis of fracture pattern, crater floor depth, and floor type. These data are used to reconstruct a history of crater modification which accounts for the large differences in affected crater size and age, the small peak-rim elevation differences, remnant central peaks within mare-flooded craters and ringed plains, ridged and flat-topped rim profiles of heavily modified craters and ringed plains, as well as the absence of positive gravity anomalies in most floor-fractured craters and some large mare-filled craters. The results indicate that: (1) impact craters became centers of intrusions and volcanism generally related to periods of basin inundation by mare basalts; (2) some light-plains units in the highlands may be due to both impact ejecta and extrusions of light-colored lava or ash; (3) floor-fractured craters may have become important volcanic vents that contributed to the inundation of the lunar surface by mare basalts; and (4) the lunar highlands probably did not fully escape the epochs of mare flooding.

Schultz, P. H.↗

NASA NTRS1976

Degradation of small mare surface features

Ring-moat structures are interpreted as remnants of flow topography associated with mare emplacement. Measurements of narrow moats characterizing these small mare features reveal a contradiction between their inferred preservation and the degree of surface degradation predicted by theoretical erosional models. Moat widths smaller than 50 m are recorded in areas where erosional models predict that walls of craters three to four times as large should be degraded to slopes of 1 deg. Crater statistics in such regions provide estimates of equilibrium conditions for impact crater formation that are consistent with the degree of preservation of the narrow moats. Although relative ages determined by observation of crater wall slopes near 20 deg, may be appropriate, it is concluded that current erosional models are not valid down to impact-degraded slopes of 1 deg. Relative age estimates based on the inferred degraded state of highly subdued craters are believed to be invalid, particularly for late Eratosthenian-age and Copernican-age mare units. In regions displaying ring-moat structures, highly subdued craters larger than the average moat widths are intepreted as either endogenic features associated with the emplacement of mare flow units or degraded secondary craters, which are typically subdued at the outset.

Schultz, P. H.↗

NASA NTRS1975

Seismic effects from major basin formations on the moon and Mercury

Grooved and hilly terrains occur at the antipode of major basins on the moon (Imbrium, Orientale) and Mercury (Caloris). Such terrains may represent extensive landslides and surface disruption produced by impact-generated P-waves and antipodal convergence of surface waves. Order-of-magnitude calculations for an Imbrium-size impact on the moon indicate P-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves would arrive subsequent to secondary ejecta impacts beyond 1000 km and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced 'fluidization' of slide material; and perhaps the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.

Schultz, P. H.↗

NASA NTRS1975

Seismically induced modification of lunar surface features

The formation of large impact craters and basins produced not only large volumes of ejecta but also catastrophic seismic waves. Theoretical models, extrapolation of terrestrial explosion data, and extrapolation of lunar impact data suggest surface displacements of 1-10 m at four crater radii from a Copernicus-size impact (4 x 10 to the 30th power ergs). Independent estimates of impact-generated stresses indicate that regions within 4 crater radii of an impact will receive shock waves with pressures exceeding 1 kbar. Greater areas also may receive shock effects as elastic waves following deep ray paths transform into shock waves near the surface. Additional seismic energy will be generated by impacts from secondary ejecta. The resulting large and long-lasting surface movement may contribute to the subdued appearance of the continuous ejecta blanket and secondary craters around large impact craters and to the degradation of small craters outside these zones.

Schultz, P. H.↗

NASA NTRS1974

Seismic effects from major basin formation on the Moon and Mercury

Grooved and hilly terrains are reported which occur at the antipode of major basins on the Moon (Imbrium, Orientale) and Mercury (Caloris). Order-of-magnitude calculations, for an Imbrium-size impact on the Moon, indicate P-wave-induced surface displacements of 10 m at the basin antipode that would arrive prior to secondary ejecta. Comparable surface waves are reported which would arrive subsequent to secondary ejecta impacts and would increase in magnitude as they converge at the antipode. Other seismically induced surface features include: subdued, furrowed crater walls produced by landslides and concomitant secondary impacts; emplacement and leveling of light plains units owing to seismically induced "fluidization" of slide material; knobby, pitted terrain around old basins from enhancement of seismic waves in ancient ejecta blankets; and the production and enhancement of deep-seated fractures that led to the concentration of farside lunar maria in the Apollo-Ingenii region.

Schultz, P. H.↗

NASA NTRS1974

A primer in lunar geology

Primary topics in lunar geology range from the evolution of the solar system to lunar photointerpretation, impact crater formation, and sampling to analyses on various Apollo lunar landing site geomorphologies.

Greeley, R.↗

NASA NTRS1973

Martian lineaments from Mariner 6 and 7 images

Mariner 6 and 7 images are used to investigate the nature and importance of linear surface trends on Mars. Cross correlations of frequency-azimuth distributions of linear trends from different Mariner frames indicate that lineations not recognized as topographic features have a component of artifacts, probably introduced during digital reconstruction of the images. Consequently, topographic and nontopographic lineations should be treated separately prior to interpretation of the data. Similar statistical tests may aid in the analysis of surface trends from future satellites and space probes.

Schultz, P. H.↗

NASA NTRS1973

Martian lineaments from Mariner 6 and 7 photographs

Mariner 6 and 7 photographs were used to investigate the nature and importance of linear surface trends on Mars. Cross correlations of frequency-azimuth distributions of linear trends from different Mariner frames indicate that lineations not recognized as topographic features have a component of pseudoforms, probably introduced during digital reconstruction of the pictures. Similar statistical tests may aid in the analysis of surface trends from future satellites and space probes. The most reliable data were separated into photometrically defined provinces. Meridiani Sinus and Margaritifer Sinus display five major trends in common, which are interpreted as extensions of crustal weaknesses related to the enormous equatorial canyon revealed in Mariner 6 and 9 pictures. Alignments of crater wall segments generally match these trends and suggest structural control of crater plan. Crater chains, however, do not match these trends and are interpreted as secondary impacts. Rose diagrams of lineations in Deucalionis Regio exhibit much more complexity and are believed to reflect a better preserved or more complex geologic history.

Schultz, P. H.↗