Engineering topics

Schultz, Richard A.

Publications and source records attributed to Schultz, Richard A..

18 records

DOE OSTI2024

Workflow for Developing and Operating Subsurface Hydrogen Storage Facilities in Porous Reservoirs

Long-duration (seasonal) storage of natural gas (NG), which primarily consists of methane (CH 4 ), has been practiced for more than a hundred years at underground gas storage (UGS) facilities that use depleted hydrocarbon reservoirs, saline aquifers, and salt caverns. To enable hydrogen (H 2 ) to be used as a long-duration, energy-storage medium, similar facilities are envisioned for underground H 2 storage (UHS) of either H 2 or H 2 /NG mixtures. Experience with UGS can be used to guide recommended practices for developing and operating UHS facilities in porous reservoirs. The most important factors (formation/fluid properties and engineering choices) that influence the performance of UHS reservoirs have been identified and quantified in previous studies. These factors and choices influence phenomena that determine the sweep efficiency of the stored working gas. These phenomena include viscous fingering, hysteretic capillary trapping, and gravity override of the working gas, as well as the upconing of nonproductive fluid that determine the sweep efficiency of the stored working gas. This report describes initial recommended-practices and a project-development workflow for UHS facilities that utilize porous reservoirs, based on the current state-of-knowledge about H 2 behavior in the subsurface. The workflow sequentially addresses all aspects of UHS project development, including the identification of H 2 sources and users, site ranking and down-selection, geologic and reservoir-engineering characterization, reservoir design, testing, risk management, commissioning, operations, and monitoring for a UHS facility. The goal is to enable UHS facilities to be developed in an efficient and timely manner, while carefully managing project risks. This workflow is similar to that which has been developed for UGS facilities (see Figure 1 of API, 2022), with the addition of tasks and subtasks specific to H 2 and UHS. The project-development workflow is broken down into three major stages: (1) define the H 2 use case; (2) rank, down-select, and characterize potential, candidate UHS sites; and (3) reservoir design, integrity testing, risk assessment, commissioning, operations, and monitoring for selected UHS sites. Each major stage is further broken down into tasks and subtasks, which are described at a high level. This report also provides more detailed descriptions of all tasks and subtasks that involve reservoir analysis and testing.

08 HYDROGEN↗

DOE OSTI2024

Underground hydrogen storage resource assessment for the Cook Inlet, Alaska

Underground hydrogen storage will be essential to a hydrogen economy. This work focuses on the challenge of identifying and screening candidate storage systems, given the unique behavior of hydrogen in the subsurface. Here, we describe a resource assessment methodology and apply it to Alaska’s Cook Inlet region. Alaska provides an interesting case study because of its abundant renewable energy resources, relatively low energy demand, and isolated electrical grid. The assessment framework considers each site’s ability to (1) store a specific volume, (2) physically-contain the stored gas, and (3) limit biogeochemical activity. We estimate that reservoirs in the Cook Inlet area could theoretically store a total of 286 TWh (or 8.6 million tonnes [Mt]) in hydrogen working gas in 92 pools. This is likely sufficient to meet both local hydrogen demand and support an array of exportable products. We further identify seven pools that may be especially well-suited for hydrogen storage. Broadly, this work demonstrates a framework for regional resource assessments. On a finer scale, this work supports an early demonstration of porous–media hydrogen storage in the United States.

08 HYDROGEN↗

DOE OSTI2020

Value-of-Information Analysis of a Fracture Prediction Method

A core-based fracture prediction method is used to illustrate a Value of Information (VOI) decision-analysis protocol to inform completion decisions in tight-gas sandstones. The ratio of late host-rock cement to available pore volume or degradation index uses petrographic observations of cement distributions in core (including sidewall cores) to predict whether nearby but unsampled fractures (widths > 0.5 to 1 mm) are sealed (non-conductive) or open (conductive). Measurements from four sandstone plays suggest that the index correctly predicts open vs. sealed fractures with an accuracy in excess of 80%. The value added is calculated using Bayesian inference in which accuracy of the index serves as the likelihood of the prior distribution of open fractures to assess the posterior probability that data represent a useful predictor of producibility. VOI of the prediction method is more than three times the cost to acquire the data. VOI is most sensitive to play-specific geologic and cost parameters including cost to drill, expected revenue from a successful well, cost of completion, cost of acquiring data for the index, and fracture probability distributions. The approach provides a way to value acquiring fracture data and points to a need for zone-specific production data in tight-gas sandstones.

02 PETROLEUM↗

NASA NTRS2004

Fault Segmentation and Martian Paleohydrology

This project was approved for only one year of funding instead of the proposed three, necessitating a major scope of the work. For the single year, the PI and a graduate student (Cheryl Goudy) focused on investigating the topographic signatures of grabens in the Tharsis region of Mars to see if the signature of an underlying igneous dike could be found. We were able to discern dikes beneath several Tharsis grabens, providing the first definitive evidence for igneous dikes in Tharsis. As a result of this grant, we published one paper, with one submitted; 3 presentations were given at AGU and at LPSC, and all were favorably received.

Schultz, Richard A.↗

NASA NTRS1994

Lithospheric-scale buckling and thrust structures on Mars: The Coprates rise and south Tharsis ridge belt

Detailed photogeologic mapping documents for the first time the deformation sequence of the Coprates rise. Materials of Middle Noachian through perhaps Early Hesperian age were involved in the horizontal shortening of crustal and lithospheric rocks that produced uplift and asymmetric, east-vergent folding of these layers during the Late Noachian and perhaps Early Hesperian. Previous suggestions of normal faulting as the deforming mechanism are not supported by the new mapping or by dislocation models of rise topography. The most likely mechanism for producing the Coprates rise is folding due to buckling instability and perhaps thrust faulting. An extensive ridge belt concentric to south Tharsis is defined by a newly recognized system of approximately coeval long-wavelength topogtaphic ridges and swales that include the Coprates rise. Horizontal shortening of crust and lithosphere is manifested by periodically spaced structures at two different scales: wrinkle ridges spaced tens of kilometers apart and the south Tharsis system of ridges spaced hundreds of kilometers apart. Both types of structures may be associated with early volcanotectonic activity and crustal thickening in south Tharsis. These and other large ridges indicate that lithospheric buckling and thrust faulting may have been common on early Mars.

Schultz, Richard A.↗

NASA NTRS1993

Strength and deformation properties of basaltic lava flows on planetary surfaces

Basaltic rocks are thought to constitute a volumetrically significant rock type on the Moon, Mercury, Mars, and Venus, in addition to the Earth. Spacecraft images of surfaces with known or suspected basaltic composition on these bodies, particularly on Venus, indicate that these rocks have been deformed in the brittle regime to form faults and perhaps dilatant cracks, in addition to folding and more distributed types of deformation. Predictions of brittle fracture or other types of deformation are made by comparing calculated stresses from a tectonic model to some criterion for rock strength. Common strength criteria used in the planetary science literature for near-surface deformation include a Griffith tensile-strength criterion for intact rock, a Mohr envelope for intact basalt, and a brittle strength envelope based on Byerlee's law of rock frictional resistance. However, planetary terrains of basaltic composition consist of much more than just intact basaltic rock. The aggregate basaltic material, termed the 'rock mass,' consists of both the intact rock and the associated fracture, faults, lithologic contacts, and other discontinuous surfaces. A basaltic rock mass is the relevant material for which strength properties must be defined and calculated model stresses must be compared to in order to more accurately predict brittle deformation. For example, the various strengths of a rock mass are less than that of intact material of the same composition. This means that tectonic models which compare stresses to intact failure strengths overestimate the stresses required for fracture and so underestimate the extent and magnitude of brittle deformation predicted in these models. On the other hand, rock mass shear strength can be greater than that predicted from Byerlee's law. The concept of rock mass strength is central to many engineering design studies in which calculated stresses are used to predict brittle fracture, and this experience indicates that brittle strength envelopes which assume properties for intact rock (Griffith parabolas) or sliding along a single, continuous surface (Byerlee's law) inadequately characterize the tensile, compressive, and shear strengths of rock masses. The criterion adopted here to relate stresses to rock mass fracture is based on a Griffith-type curve for tensile normal stress and a concave downward curve for compressive normal stress. It is the only available criterion that explicitly considers the weakening effects of discontinuities within the rock mass on the stress state required for fracture.

Schultz, Richard A.↗

NASA NTRS1993

Large, ancient, compressional structures on Mars

Our search for large compressional structures similar to the Coprates rise reveals that the rise is part of a group of about three dozen structures (the 'Thaumasia fold belt') that encircles the southern part of the Tharsis region. Similar structures are scattered over Mars. All appear to be Noachian or Early Hesperian in age, suggesting that lithospheric-scale buckling was a common form of early Martian compressional deformation.

Tanaka, Kenneth L.↗

NASA NTRS1991

Structural development of Coprates Chasma and western Ophir Planum, Valles Marineris Rift, Mars

A portion of Valles Marineris was mapped in detail in order to clarify the dominant processes responsible for the formation of Coprates Chasma. New crater counts indicate that the caprock on western Ophir Planum plateau has a Late Hesperian crater age, whereas trough floor preserved in western Coprates Chasma has an Early to Late Hesperian crater age. Caprock on western Ophir Planum correlates in relative age with the Syria Planum Formation, and the caprock may overlie Lower Hesperian ridged plains material. Trough floor material in Coprates Chasma correlates in relative age with ridged plains material on the adjacent Lunae Planum and Coprates plateaus and represents a structurally coherent block displaced downward by normal faulting. The crater counts and detailed structural relationships demonstrate the commonly accepted view that Coprates Chasma occupies a graben. Formation of Coprates Chasma by keystone collapse of locally elevated topography is not supported by available topographic data, but a general association between the trough and volcanotectonic activity in the Tharsis region is considered to be a likely explanation for the trough forming stresses. Faulting on Ophir Planum appears related to the faulting that created the Coprates Chasma trough. The geology and structure of Coprates Chasma are comparable to those of other troughs such as Melas, Ius, and perhaps Candor chasmata, suggesting that these troughs may also have formed as grabens.

Schultz, Richard A.↗

NASA NTRS1991

Late Noachian development of the Coprates rise, Mars

The Coprates rise forms a 900 km long, north to northeast trending ridge south of Coprates Chasma between long. 56 and 60 degs. Radar and stereo photogrammetric data indicate that the rise is 2 to 4 km above a neighboring trough to the east. The break in slope between the rise and this trough is well defined topographically and in Viking images. In turn, the trough is bordered to the to the east at long. 52 deg by a much gentler rise. West of the Coprates rise, the terrain dips about 0.2 deg to roughly long. 75 deg. The rise and flanking highs were previously interpreted to be tilted fault blocks formed by either Tharsis tectonism or an ancient impact. Results are now reported of a preliminary geologic study that documents Late Noachian growth of the Coprates rise as a asymmetric fold. More comprehensive work will lead to a mechanical analysis of the kinematic development of the rise. It is concluded that the Coprate rise formed during the Late Noachian by 2 to 4 km of asymmetric uplift (steeper on its east flank). The timing is inconsistent with an origin by an early impact, but it coincides in time with early Tharsis centered radial faulting at Syria Planum.

Tanaka, Kenneth L.↗

NASA NTRS1990

A new survey of multiring impact basins on Mars

Literature data on Martian multiring impact basins with diameters greater than 500 km are summarized, and evidence is found for eight new such basins. The pattern of changes of basin morphology with increasing basin size suggests three subclasses of multiring basins: (1) multiring basins with diameters up to about 1850 km, which are characterized by the Orientale type concentric structure and cumulative frequency power law slope of -0.75; (2) the Argyre-type basins (with diameters between 1850 and 3600 km, defined by rugged concentric annnuli and a power law slope of nearly -2.0; and (3) the Chryse-type basins (with diameters greater than 3600 km), which exhibit multiple concentric rings and very shallow topographic profiles. Multiring basins are found in all parts of Mars, including the northern lowlands, Tharsis, and surrounding highlands, and are associated with much of the subsequent resurfacing of cratered terrain.

Schultz, Richard A.↗

NASA NTRS1990

Speculations on the origin and evolution of the Utopia-Elysium lowlands of Mars

This paper proposes a qualitative model for the origin of the Utopia-Elysium northern lowlands on eastern Mars in terms of the long-term evolution of two large overlapping impact basins. The model, which is consistent with both the observed geologic constraints and more quantitative results obtained by numerical modeling of smaller (Orientale-size) impact basins, is shown to qualitatively account for the major topographic variation seen in the Utopia-Elysium region, including the overall 'lowness' of the area and localized depressions.

Frey, Herbert V.↗

NASA NTRS1990

MEVTV study: Early tectonic evolution of Mars: Crustal dichotomy to Valles Marineris

Several fundamental problems were addressed in the early impact, tectonic, and volcanic evolution of the martian lithosphere: (1) origin and evolution of the fundamental crustal dichotomy, including development of the highland/lowland transition zone; (2) growth and evolution of the Valles Marineris; and (3) nature and role of major resurfacing events in early martian history. The results in these areas are briefly summarized.

Frey, Herbert V.↗

NASA NTRS1990

Complex early rifting in Valles Marineris: Results from preliminary geologic mapping of the Ophir Planum Region of Mars

Photogeologic mapping of the Ophir Planum quadrangle was undertaken to solve two main problems: (1) what controlled the location, orientation, and growth of Ophir Planum grabens; and (2) how are the grabens and trough faulting related. The rich geological history of the Ophir Planum quadrangle underscores the fundamental importance of faulting in the early growth of Valles Marineris.

Schultz, Richard A.↗

NASA NTRS1990

Possible deficiency of large Martian craters and relative cratering of the terrestrial planets

Mars appears to be deficient in large craters relative to Mercury and the Moon. This relative deficiency conflicts with the interpretation of a common population of impactors within the early inner solar system and suggest either of two possibilities. If the apparent deficiency of martian craters is real then the population of impactors at Mars differed significantly from that closer to the Sun. If the apparent deficiency is not real then the complete crater inventory of Mars should be similar to those of Mercury and the Moon, supporting the interpretation of a single population of impactors. These alternate possibilities can be tested by comparing revised inventories that include partly buried or eroded craters to an estimate of Mars' possible relative crater deficiency.

Schultz, Richard A.↗

NASA NTRS1990

Strike-slip faulting, wrinkle ridges, and time variable stress states in the Coprates Region of Mars

The existence of strike-slip faults was recently documented in two locations on Mars. Two clear examples are reviewed located southeast of Valles Marineris and preliminary evidence is presented for more widespread strike-slip deformation elsewhere in Coprates. The first two examples show that strike-slip faulting occurred in a broad zone east of the Coprates Rise spanning approximately 400 km east-west by perhaps 1000 km north-south. The last example suggests that the growth of major wrinkle ridges throughout Coprates may have been influenced by horizontally directed shear stresses and that more than one generation of ridges was produced. Thus, 'compressional' deformation of ridged plains south of Valles Marineris was spatially heterogeneous and a temporal change in stress may have been involved.

Schultz, Richard A.↗

NASA NTRS1990

Geology, structure, and statistics of multi-ring basins on Mars

Available data on Martian multi-ring basins were compiled and evaluated using the new 1:15 million scale geologic maps of Mars and global topography was revised as base maps. Published center coordinates and ring diameters of Martian basins were plotted by computer and superimposed onto the base maps. In many cases basin centers or ring diameters or both had to be adjusted to achieve a better fit to the revised maps. It was also found that additional basins can explain subcircular topographic lows as well as map patterns of old Noachian materials, volcanic plains units, and channels in the Tharsis region.

Schultz, Richard A.↗

NASA NTRS1989

Strike-slip faulting of ridged plains near Valles Marineris, Mars

This paper identifies and documents several well-preserved examples of Martian strike-slip faults and examines their relationships to wrinkle-ridges. The strike-slip faulting predates or overlaps periods of wrinkle-ridge growth southeast of Valles Marineris, and some wrinkle ridges may have nucleated and grown as a result of strike-slip displacements along the echelon fault arrays. Lateral displacements of several km inferred along these arrays may be related to tectonism in Tharsis.

Schultz, Richard A.↗

NASA NTRS1988

Large impact basins and the mega-impact origin for the crustal dichotomy on Mars

The hypothesis that the crustal dichotomy on Mars is due to a single giant (mega) impact early in Martian history is tested by determining the number of 'missing' basins, the difference between the observed number of large impact basins on Mars and the number expected from a 1/D-squared distribution. If the Borealis Basin was the largest member of a 1/D-squared impact population, a large number of 'missing' basins is expected which is too large to be hidden by the younger surface units. If Chryse is the largest member of a 1/D-squared impact population, the more modest number of 'missing' basins could be confined to areas of Mars that have been resurfaced or reworked by subsequent geologic processes.

Frey, Herbert↗