Search NASA⌕ Search

Engineering topics

Schuman, Catherine

Publications and source records attributed to Schuman, Catherine.

At least 19 records

Enhanced read resolution in reconfigurable memristive synapses for Spiking Neural Networks

Abstract The synapse is a key element circuit in any memristor-based neuromorphic computing system. A memristor is a two-terminal analog memory device. Memristive synapses suffer from various challenges including high voltage, SET or RESET failure, and READ margin issues that can degrade the distinguishability of stored weights. Enhancing READ resolution is very important to improving the reliability of memristive synapses. Usually, the READ resolution is very small for a memristive synapse with a 4-bit data precision. This work considers a step-by-step analysis to enhance the READ current resolution or the read current difference between two resistance levels for a current-controlled memristor-based synapse. An empirical model is used to characterize the $${\hbox {HfO}}_{2}$$ HfO 2 based memristive device. $$1\textrm{st}$$ 1 st and $$2\textrm{nd}$$ 2 nd stage device of our proposed synapse design can be scaled to enhance the READ current margin up to $$\sim$$ ∼ 4.3 $$\times$$ × and $$\sim$$ ∼ 21%, respectively. Moreover, READ current resolution can be enhanced with run-time adaptation techniques such as READ voltage scaling and body biasing. The READ voltage scaling and body biasing can improve the READ current resolution by about 46% and 15%, respectively. TENNLab’s neuromorphic computing framework is leveraged to evaluate the effect of READ current resolution on classification, control, and reservoir computing applications. Higher READ current resolution shows better accuracy than lower resolution even when facing different levels of read noise.

97 MATHEMATICS AND COMPUTING↗

On-Sensor Data Filtering using Neuromorphic Computing for High Energy Physics Experiments

This work describes the investigation of neuromorphic computing-based spiking neural network (SNN) models used to filter data from sensor electronics in high energy physics experiments conducted at the High Luminosity Large Hadron Collider. We present our approach for developing a compact neuromorphic model that filters out the sensor data based on the particle's transverse momentum with the goal of reducing the amount of data being sent to the downstream electronics. The incoming charge waveforms are converted to streams of binary-valued events, which are then processed by the SNN. We present our insights on the various system design choices - from data encoding to optimal hyperparameters of the training algorithm - for an accurate and compact SNN optimized for hardware deployment. Our results show that an SNN trained with an evolutionary algorithm and an optimized set of hyperparameters obtains a signal efficiency of about 91% with nearly half as many parameters as a deep neural network.

R. Kulkarni, Shruti↗

Encoding integers and rationals on neuromorphic computers using virtual neuron

Abstract Neuromorphic computers emulate the human brain while being extremely power efficient for computing tasks. In fact, they are poised to be critical for energy-efficient computing in the future. Neuromorphic computers are primarily used in spiking neural network–based machine learning applications. However, they are known to be Turing-complete, and in theory can perform all general-purpose computation. One of the biggest bottlenecks in realizing general-purpose computations on neuromorphic computers today is the inability to efficiently encode data on the neuromorphic computers. To fully realize the potential of neuromorphic computers for energy-efficient general-purpose computing, efficient mechanisms must be devised for encoding numbers. Current encoding mechanisms (e.g., binning, rate-based encoding, and time-based encoding) have limited applicability and are not suited for general-purpose computation. In this paper, we present the virtual neuron abstraction as a mechanism for encoding and adding integers and rational numbers by using spiking neural network primitives. We evaluate the performance of the virtual neuron on physical and simulated neuromorphic hardware. We estimate that the virtual neuron could perform an addition operation using just 23 nJ of energy on average with a mixed-signal, memristor-based neuromorphic processor. We also demonstrate the utility of the virtual neuron by using it in some of the μ -recursive functions, which are the building blocks of general-purpose computation.

97 MATHEMATICS AND COMPUTING↗

Neuromorphic Computing is Turing-Complete

Neuromorphic computing is a non-von Neumann computing paradigm that performs computation by emulating the human brain. Neuromorphic systems are extremely energy-efficient and known to consume thousands of times less power than CPUs and GPUs. They have the potential to drive critical use cases such as autonomous vehicles, edge computing and internet of things in the future. For this reason, they are sought to be an indispensable part of the future computing landscape. Neuromorphic systems are mainly used for spike-based machine learning applications, although there are some non-machine learning applications in graph theory, differential equations, and spike-based simulations. These applications suggest that neuromorphic computing might be capable of general-purpose computing. However, general-purpose computability of neuromorphic computing has not been established yet. In this work, we prove that neuromorphic computing is Turing-complete and therefore capable of general-purpose computing. Specifically, we present a model of neuromorphic computing, with just two neuron parameters (threshold and leak), and two synaptic parameters (weight and delay). We devise neuromorphic circuits for computing all the μ-recursive functions (i.e., constant, successor and projection functions) and all the μ-recursive operators (i.e., composition, primitive recursion and minimization operators). Given that the μ-recursive functions and operators are precisely the ones that can be computed using a Turing machine, this work establishes the Turing-completeness of neuromorphic computing.

Date, Prasanna↗

Next-Cycle Optimal Dilute Combustion Control via Online Learning of Cycle-to-Cycle Variability Using Kernel Density Estimators

Dilute combustion using exhaust gas recirculation (EGR) presents a cost-effective method for increasing the efficiency of spark-ignition (SI) engines. However, the maximum amount of EGR that can be used at a given condition is limited by a rapid increment of cycle-to-cycle variability (CCV). This study describes a methodology to design a model-based stochastic optimal controller to adjust the cycle-to-cycle fuel injection quantity in order to reduce CCV and further extend the dilute limit. Given the complexity and chaotic nature of combustion events, the controller was enhanced with online learning in order to identify the statistical properties of combustion efficiency, which are needed to generate predictions for next-cycle events. This study showed that a kernel density estimator (KDE) can be used to learn the combustion properties in real time and can be incorporated into the feedback policy in order to calculate the optimal control command. Experimental results suggested that the dilute limit can be extended from 18.5% to 21% EGR fraction at an operating condition relevant for highway cruising. Additionally, the proposed controller can achieve a large CCV reduction with less fuel enrichment compared to previous methods, overall contributing to an increase in 0.2% indicated fuel conversion efficiency.

33 ADVANCED PROPULSION SYSTEMS↗

Evolutionary vs imitation learning for neuromorphic control at the edge*

Abstract Neuromorphic computing offers the opportunity to implement extremely low power artificial intelligence at the edge. Control applications, such as autonomous vehicles and robotics, are also of great interest for neuromorphic systems at the edge. It is not clear, however, what the best neuromorphic training approaches are for control applications at the edge. In this work, we implement and compare the performance of evolutionary optimization and imitation learning approaches on an autonomous race car control task using an edge neuromorphic implementation. We show that the evolutionary approaches tend to achieve better performing smaller network sizes that are well-suited to edge deployment, but they also take significantly longer to train. We also describe a workflow to allow for future algorithmic comparisons for neuromorphic hardware on control applications at the edge.

Schuman, Catherine↗

Avoiding Excess Computation in Asynchronous Evolutionary Algorithms

Asynchronous evolutionary algorithms are becoming increasingly popular as a means of making full use of many processors while solving computationally expensive search and optimization problems. These algorithms excel at keeping large clusters fully utilized, but may sometimes inefficiently sample an excess of fast-evaluating solutions at the expense of higher-quality, slow-evaluating ones. We introduce a steady-state parent selection strategy, SWEET (“Selection whilE EvaluaTing”), that sometimes selects individuals that are still being evaluated and allows them to reproduce early. This gives slow-evaluating individuals that have higher fitnesses an increased ability to multiply in the population. We find that SWEET appears effective in simulated take-over time analysis, but that its benefit is confined mostly to early in the run, and our preliminary study on an autonomous vehicle controller problem that involves tuning a spiking neural network proves inconclusive.

Scott, Eric↗

Intelligent Prediction of States in Multi-port Autonomous Reconfigurable Solar power plant (MARS)

In power electronics, prediction of states may be used for identification of faults, determination of aging of components, identification of bad data measurements, among others. Prediction of states in power electronics have broadly been based on: (a) physics-based models, (b) data-driven models, and (c) hybrid models. In this paper, data-driven approaches are presented for intelligent prediction of states in multi-port autonomous reconfigurable solar power plant (MARS) and compared. The data-set needed to train the data-driven models based on artificial intelligence (AI) algorithms has been identified and the trained models are evaluated under different extrapolated normal and abnormal operating conditions. The AI algorithms include nonlinear auto-regressive exogenous model (NARX), spiking neural networks (SNN), and decision tree. The models are compared and contrasted. The best model (NARX) is evaluated under different normal and abnormal operating conditions that have indicated accurate prediction.

Debnath, Suman↗

Real-Time Evolution and Deployment of Neuromorphic Computing at The Edge

Extremely low power neuromorphic systems are well-suited for deployment to the edge for many applications. In many use cases of neuromorphic computing for control, a spiking neural network is trained off-line using a simulation and then deployed to a neuromorphic system at the edge, where it will operate without ongoing training or learning. However, it may be desirable to continue training or learning at the edge to refine or adapt to the real-world system. In this work, we propose an approach for performing real-time evolutionary optimization for spiking neural networks for neuromorphic deployment at the edge. In particular, we propose a combination of simulation and real-world evaluations, along with feedback from the real-world environment, to train spiking neural networks for continuous deployment to the edge. We show that the real-time evolution at the edge approach achieves comparable performance to an evolution approach that requires constant evaluation in the realworld environment.

Schuman, Catherine↗

Computational Complexity of Neuromorphic Algorithms

Neuromorphic computing has several characteristics that make it an extremely compelling computing paradigm for post Moore computation. Some of these characteristics include intrinsic parallelism, inherent scalability, collocated processing and memory, and event-driven computation. While these characteristics impart energy efficiency to neuromorphic systems, they do come with their own set of challenges. One of the biggest challenges in neuromorphic computing is to establish the theoretical underpinnings of the computational complexity of neuromorphic algorithms. In this paper, we take the first steps towards defining the space and time complexity of neuromorphic algorithms. Specifically, we describe a model of neuromorphic computation and state the assumptions that govern the computational complexity of neuromorphic algorithms. Next, we present a theoretical framework to define the computational complexity of a neuromorphic algorithm. We explicitly define what space and time complexities mean in the context of neuromorphic algorithms based on our model of neuromorphic computation. Finally, we leverage our approach and define the computational complexities of six neuromorphic algorithms: constant function, successor function, predecessor function, projection function, neuromorphic sorting algorithm and neighborhood subgraph extraction algorithm.

Date, Prasanna↗

Neuromorphic Graph Algorithms: Cycle Detection, Odd Cycle Detection, and Max Flow

Neuromorphic computing is poised to become a promising computing paradigm in the post Moore’s law era due to its extremely low power usage and inherent parallelism. Spiking neural networks are the traditional use case for neuromorphic systems, and have proven to be highly effective at machine learning tasks such as control problems. More recently, neuromorphic systems have been applied outside of the arena of machine learning, primarily in the field of graph algorithms. Neuromorphic systems have been shown to perform graph algorithms faster and with lower power consumption than their traditional (GPU/CPU) counterparts, and are hence an attractive option for a co-processing unit in future high performance computing systems, where graph algorithms play a critical role. In this paper, we present a neuromorphic implementation of cycle detection, odd cycle detection, and the Ford-Fulkerson max-flow algorithm. We further evaluate the performance of these implementations using the NEST neuromorphic simulator by using spike counts and simulation time as proxies for energy consumption and run time. In addition to gains inherent in neuromorphic systems, we show that within the neuromorphic implementations early stopping criteria can be implemented to further improve performance.

Kay, Bill↗

Next-Cycle Optimal Fuel Control for Cycle-to-Cycle Variability Reduction in EGR-Diluted Combustion

In this simulation study, cycle-to-cycle fuel control was used to reduce CCV by injecting additional fuel in operating conditions with sporadic misfires and partial burns. An optimal control policy was proposed that utilizes 1) a physics-based model that tracks in-cylinder gas composition and 2) a one-step-ahead prediction of the combustion efficiency based on a kernel density estimator. The optimal solution, however, presents a tradeoff between the reduction in combustion CCV and the increase in fuel injection quantity required to stabilize the charge. Such a tradeoff can be ad- just by a single parameter embedded in the cost function.

Maldonado, BryanP. [Oak Ridge National Lab. (ORNL)↗

A Software Framework for Comparing Training Approaches for Spiking Neuromorphic Systems

There are a wide variety of training approaches for spiking neural networks for neuromorphic deployment. However, it is often not clear how these training algorithms perform or compare when applied across multiple neuromorphic hardware platforms and multiple datasets. In this work, we present a software framework for comparing performance across four neuromorphic training algorithms across three neuromorphic simulators and four simple classification tasks. We introduce an approach for training a spiking neural network using a decision tree, and we compare this approach to training algorithms based on evolutionary algorithms, back-propagation, and reservoir computing. We present a hyperparameter optimization approach to tune the hyperparameters of the algorithm, and show that these optimized hyperparameters depend on the processor, algorithm, and classification task. Finally, we compare the performance of the optimized algorithms across multiple metrics, including accuracy, training time, and resulting network size, and we show that there is not one best training algorithm across all datasets and performance metrics.

Schuman, Catherine↗

Low Power Hardware-In-The-Loop Neuromorphic Training Accelerator

The training process for spiking neural networks can be very computationally intensive. Approaches such as evolutionary algorithms may require evaluating thousands or millions of candidate solutions. In this work, we propose using neuromorphic cores implemented on a Xilinx Zynq system on chip to accelerate and improve the energy efficiency of the evaluation step of an evolutionary training approach. We demonstrate this can significantly reduce the required energy to evolve a network with some cases showing greater than 10 times improvement as compared to a CPU-only system.

Mitchell, Parker↗