Search NASA⌕ Search

Engineering topics

Schwartz, A J

Publications and source records attributed to Schwartz, A J.

Hidden disorder in the [alpha];#8242;;#8594;[sigma] transformation of Pu-1.9 at. % Ga

Enthalpy and entropy are thermodynamic quantities critical to determining how and at what temperature a phase transition occurs. At a phase transition, the enthalpy and temperature-weighted entropy differences between two phases are equal ({Delta}H=T{Delta}S), but there are materials where this balance has not been experimentally or theoretically realized, leading to the idea of hidden order and disorder. In a Pu-1.9 at. % Ga alloy, the {delta} phase is retained as a metastable state at room temperature, but at low temperatures, the {delta} phase yields to a mixed-phase microstructure of {delta}- and {alpha}{prime}-Pu. The previously measured sources of entropy associated with the {alpha}{prime} {yields} {delta} transformation fail to sum to the entropy predicted theoretically. We report an experimental measurement of the entropy of the {alpha}{prime} {yields} {delta} transformation that corroborates the theoretical prediction, and implies that only about 65% of the entropy stabilizing the {delta} phase is accounted for, leaving a missing entropy of about 0.5 k{sub B}/atom. Some previously proposed mechanisms for generating entropy are discussed, but none seem capable of providing the necessary disorder to stabilize the {delta} phase. This hidden disorder represents multiple accessible states per atom within the {delta} phase of Pu that may not be included in our current understanding of the properties and phase stability of {delta}-Pu.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

B+ and D(S)+ Decay Constants from Belle and BaBar

The Belle and Babar experiments have measured the branching fractions for B{sup +} {yields} {tau}{sup +}{nu} and D{sub s}{sup +} {yields} {mu}{sup +}{nu} decays. From these measurements one can extract the B{sup +} and D{sub s}{sup +} decay constants, which can be compared to lattice QCD calculations. For the D{sub s}{sup +} decay constant, there is currently a 2.1 {sigma} difference between the calculated value and the measured value.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of B{sub s}{sup 0}{yields}D{sub s}{sup (*)+}D{sub s}{sup (*)-} Using e{sup +}e{sup -} Collisions and a Determination of the B{sub s}-B{sub s} Width Difference {Delta}{Gamma}{sub s}

We have made the first observation of B{sub s}{sup 0}{yields}D{sub s}{sup (*)+}D{sub s}{sup (*)-} decays using 23.6 fb{sup -1} of data recorded by the Belle experiment running on the {Upsilon}(5S) resonance. The branching fractions are measured to be B(B{sub s}{sup 0}{yields}D{sub s}{sup +}D{sub s}{sup -})=(1.03{sub -0.32-0.25}{sup +0.39+0.26})%, B(B{sub s}{sup 0}{yields}D{sub s}{sup *{+-}}D{sub s}{sup {-+}})=(2.75{sub -0.71}{sup +0.83}{+-}0.69)%, and B(B{sub s}{sup 0}{yields}D{sub s}{sup *+}D{sub s}{sup *-})=(3.08{sub -1.04-0.86}{sup +1.22+0.85})%; the sum is B[B{sub s}{sup 0}{yields}D{sub s}{sup (*)+}D{sub s}{sup (*)-}]=(6.85{sub -1.30-1.80}{sup +1.53+1.79})%. Assuming B{sub s}{sup 0}{yields}D{sub s}{sup (*)+}D{sub s}{sup (*)-} saturates decays to CP-even final states, the branching fraction determines the ratio {Delta}{Gamma}{sub s}/cos{phi}, where {Delta}{Gamma}{sub s} is the difference in widths between the two B{sub s}-B{sub s} mass eigenstates, and {phi} is a CP-violating weak phase. Taking CP violation to be negligibly small, we obtain {Delta}{Gamma}{sub s}/{Gamma}{sub s}=0.147{sub -0.030}{sup +0.036}(stat){sub -0.041}{sup +0.042}(syst), where {Gamma}{sub s} is the mean decay width.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurement of {Upsilon}(5S) decays to B{sup 0} and B{sup +} mesons

Decays of the {Upsilon}(5S) resonance to channels with B{sup +} and B{sup 0} mesons are studied using a 23.6 fb{sup -1} data sample collected with the Belle detector at the KEKB asymmetric-energy e{sup +}e{sup -} collider. Fully reconstructed B{sup +{yields}}J/{psi}K{sup +}, B{sup 0{yields}}J/{psi}K*{sup 0}, B{sup +{yields}}D{sup 0{pi}+}, and B{sup 0{yields}}D{sup -{pi}+} decays are used to obtain the charged and neutral B production rates per bb event, f(B{sup +})=(72.1{sub -3.8}{sup +3.9{+-}}5.0)% and f(B{sup 0})=(77.0{sub -5.6}{sup +5.8{+-}}6.1)%. Assuming equal rates to B{sup +} and B{sup 0} mesons in all channels produced at the {Upsilon}(5S) energy, we measure the fractions for transitions to two-body and three-body channels with B meson pairs, f(BB)=(5.5{sub -0.9}{sup +1.0{+-}}0.4)%, f(BB*+B*B)=(13.7{+-}1.3{+-}1.1)%, f(B*B*)=(37.5{sub -1.9}{sup +2.1{+-}}3.0)%, f(BB{pi})=(0.0{+-}1.2{+-}0.3)%, f(BB*{pi}+B*B{pi})=(7.3{sub -2.1}{sup +2.3{+-}}0.8)%, and f(B*B*{pi})=(1.0{sub -1.3}{sup +1.4{+-}}0.4)%. The latter three fractions are obtained assuming isospin conservation.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Probing the isothermal (delta)->(alpha)' martensitic transformation in Pu-Ga with in situ x-ray diffraction

The time-temperature-transformation (TTT) curve for the {delta} {yields} {alpha}{prime} isothermal martensitic transformation in a Pu-1.9 at. % Ga alloy is peculiar because it is reported to have a double-C curve. Recent work suggests that an ambient temperature conditioning treatment enables the lower-C curve. However, the mechanisms responsible for the double-C are still not fully understood. When the {delta} {yields} {alpha}{prime} transformation is induced by pressure, an intermediate {gamma}{prime} phase is observed in some alloys. It has been suggested that transformation at upper-C temperatures may proceed via this intermediate phase, while lower-C transformation progresses directly from {delta} to {alpha}{prime}. To investigate the possibility of thermally induced transformation via the intermediate {gamma}{prime} phase, in situ x-ray diffraction at the Advanced Photon Source was performed. Using transmission x-ray diffraction, the {delta} {yields} {alpha}{prime} transformation was observed in samples as thin at 30 {micro}m as a function of time and temperature. The intermediate {gamma}{prime} phase was not observed at -120 C (upper-C curve) or -155 C (lower-C curve). Results indicate that the bulk of the {alpha}{prime} phase forms relatively rapidly at -120 C and -155 C.

36 MATERIALS SCIENCE↗

B{sup +} and D{sub s}{sup +} Decay Constants from Belle and Babar

The Belle and Babar experiments have measured the branching fractions for B{sup +}{yields}{tau}{sup +}{nu} and D{sub s}{sup +}{mu}{sup +}{nu} decays. From these measurements one can extract the B{sup +} and D{sub s}{sup +} decay constants, which can be compared to lattice QCD calculations. For the D{sub s}{sup +} decay constant, there is currently a 2.1{sigma} difference between the calculated value and the measured value.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Campaign 2 Level 2 Milestone Review 2009: Milestone # 3132 Determine Sustainable TATB Source and Processing Options, and Potential Binder Options

A presentation was made to the Milestone review committee on September 18, 2009 that outlined the efforts making up the achievement of the Campaign 2, Level 2 Milestone No.3132. After the presentation and review of the collective work, the committee determined that the milestone was successfully completed. Highlights from this review are discussed here. A brief summary of the discussion points includes: (1) It was clear that this work represents a comprehensive collection of experimental, modeling, literature review, and analysis activities with a thorough attention to the details. The deliverables include 2 technical presentations and 5 written reports describing this work. (2) This is a joint LLNL/LANL milestone led by Campaign 2 with leveraging effort from other campaigns and activities at LLNL: (a) The contributing programs included Enhanced Surveillance Campaign (ESC) and Readiness Campaign. Key technical elements of this work were built on scientific advances from the Laboratory Directed Research and Development (LDRD) program. (b) Part of this work covers activities associated with the Enhanced Collaboration (EC) with the Atomic Weapons Establishment (AWE). (3) This Milestone work has supported a high-level Directed Stockpile Work (DSW) Joint DoD/DOE TATB Production Initiative. This is an example of the strong relevance of this Milestone research to current stockpile issues. A summary of the future direction in this research area includes: (1) The Ionic Liquid (IL) re-crystallization process has been demonstrated to improve the performance of recrystallized TATB molecule. However, lower thermal stability of the IL crystallized material (compared to conventional TATB) warrants further study to understand the source of this effect. (2) The compatibility issue needs to be addressed in upcoming work. One concern is how the new solvent and ionic liquid used in the formulation process might behave in the nuclear explosive assembly. Similarly, compatibility studies for the candidate binder must be performed. The future focus on R&D and additional scientific tools to address these areas is technically sound. (3) Currently there is no defined process for advancing this milestone's research and development successes into a production scale effort. The committee recognizes that other campaigns (Readiness Campaign, Enhanced Surveillance Campaign) will need to consider additional leverage resources for that scale-up effort. (4) We recommend that this effort continues to use modeling and experiment as complimentary paths to strengthen the scientific approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Campaign 2 Level 2 Milestone Review 2009: Milestone # 3131 Grain Scale Simulation of Pore Collapse

The milestone reviewed on Sept. 16, 2009 was 'High-fidelity simulation of shock initiation of high explosives at the grain scale using coupled hydrodynamics, thermal transport and chemistry'. It is the opinion of the committee that the team has satisfied the milestone. A detailed description of how the goals were met is provided. The milestone leveraged capabilities from ASC Physics and Engineering Materials program combined with experimental input from Campaign 2. A combined experimental-multiscale simulation approach was used to create and validate the various TATB model components. At the lowest length scale, quantum chemical calculations were used to determine equations of state, thermal transport properties and reaction rates for TATB as it is decomposing. High-pressure experiments conducted in diamond anvil cells, gas guns and the Z machine were used to validate the EOS, thermal conductivity, specific heat and predictions of water formation. The predicted reaction networks and chemical kinetic equations were implemented in Cheetah and validated against the lower length scale data. Cheetah was then used within the ASC code ALE3D for high-resolution, thermo-mechanically coupled simulations of pore collapse at the micron size scale to predict conditions for detonation initiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for nascent equilibrium nuclei as progenitors of anomalous transformation kinetics in a Pu-Ga alloy

By alloying Pu with Ga, the face-centered-cubic {delta} phase can be retained down to room temperature in a metastable configuration, which ultimately yields to chemical driving forces by undergoing the {delta} {yields} {alpha}' isothermal martensitic transformation below M{sub s} {approx} = -100 C. This transformation is found to exhibit anomalous transformation kinetics, the nature of which has remained elusive for over 30 years. Recently, a 'conditioning' treatment - an isothermal hold above M{sub s} - has been shown to dramatically affect the amount of {alpha}' phase formed during the transformation. Herein, we report evidence that the conditioning treatment induces the lower-C of the double-C curve, and we furthermore implicate the classical nucleation of equilibrium phases within the conditioning range as the underlying mechanism behind conditioning in Pu-Ga alloys. This mechanism should not be rigorously exclusive to plutonium alloys as it arises from the proximity between the retained metastable phase and the low-energy equilibrium phases.

36 MATERIALS SCIENCE↗

On the Potential for Vacancy Annihilation as a Mechanism for Conditioning in Pu-1.9 at.% Ga

The {delta} {yields} {alpha}{prime} martensitic transformation in Pu-1.9 at.% Ga occurs when the alloy is cooled below about -100 C. This transformation exhibits anomalous behavior, where the isothermal transformation proceeds atypically with double-C kinetics. Recent work has revealed that an ambient temperature isothermal hold (referred to as conditioning) prior to the transformation has different effects depending on whether transformation proceeds in the upper- or lower-C of the double-C: the amount of transformation is increased with conditioning in the upper-C, while the transformation in the lower-C seems to be engendered by conditioning. The mechanism by which conditioning affects the low-temperature {delta} {yields} {alpha}{prime} transformation is thus of great importance to understanding the transformation itself as well as the general circumstances that can affect a martensitic phase transformation. Using differential scanning calorimetry measurements, vacancy annihilation as a mechanism for the conditioning effect has been examined. While there are some characteristics of the conditioning effect that are reminiscent of vacancy annihilation, the results of these experiments suggest that vacancy annihilation is not a likely candidate description for the conditioning effect.

36 MATERIALS SCIENCE↗

Evidence for Neutral B Meson Decays to {omega}K*{sup 0}

We present the results of a study of the charmless vector-vector decay B{sup 0}{yields}{omega}K*{sup 0} with 657x10{sup 6} BB pairs collected with the Belle detector at the KEKB e{sup +}e{sup -} collider. We measure the branching fraction to be B(B{sup 0}{yields}{omega}K*{sup 0})=[1.8{+-}0.7(stat){+-}0.3(syst)]x10{sup -6} with 3.0{sigma} significance. We also perform a helicity analysis of the {omega} and K*{sup 0} vector mesons, and obtain the longitudinal polarization fraction f{sub L}(B{sup 0}{yields}{omega}K*{sup 0})=0.56{+-}0.29(stat){sub -0.08}{sup +0.18}(syst). Finally, we measure a large nonresonant branching fraction B[B{sup 0}{yields}{omega}K{sup +}{pi}{sup -};M{sub K{pi}}(set-membership sign)(0.755,1.250) GeV/c{sup 2} ]=[5.1{+-}0.7(stat){+-}0.7(syst)]x10{sup -6} with a significance of 9.5{sigma}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Experimental Benchmarking of Pu Electronic Structure

The standard method to determine the band structure of a condensed phase material is to (1) obtain a single crystal with a well defined surface and (2) map the bands with angle resolved photoelectron spectroscopy (occupied or valence bands) and inverse photoelectron spectroscopy (unoccupied or conduction bands). Unfortunately, in the case of Pu, the single crystals of Pu are either nonexistent, very small and/or having poorly defined surfaces. Furthermore, effects such as electron correlation and a large spin-orbit splitting in the 5f states have further complicated the situation. Thus, we have embarked upon the utilization of unorthodox electron spectroscopies, to circumvent the problems caused by the absence of large single crystals of Pu with well-defined surfaces. Our approach includes the techniques of resonant photoelectron spectroscopy, x-ray absorption spectroscopy, electron energy loss spectroscopy, Fano Effect measurements, and Bremstrahlung Isochromat Spectroscopy, including the utilization of micro-focused beams to probe single-crystallite regions of polycrystalline Pu samples.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Present State of Electron Backscatter Diffraction and Prospective Developments

Electron backscatter diffraction (EBSD), when employed as an additional characterization technique to a scanning electron microscope (SEM), enables individual grain orientations, local texture, point-to-point orientation correlations, and phase identification and distributions to be determined routinely on the surfaces of bulk polycrystals. The application has experienced rapid acceptance in metallurgical, materials, and geophysical laboratories within the past decade (Schwartz et al. 2000) due to the wide availability of SEMs, the ease of sample preparation from the bulk, the high speed of data acquisition, and the access to complementary information about the microstructure on a submicron scale. From the same specimen area, surface structure and morphology of the microstructure are characterized in great detail by the relief and orientation contrast in secondary and backscatter electron images, element distributions are accessed by energy dispersive spectroscopy (EDS), wavelength dispersive spectroscopy (WDS), or cathodoluminescence analysis, and the orientations of single grains and phases can now be determined, as a complement, by EBSD.

36 MATERIALS SCIENCE↗

Thermally Activated Martensite: Its Relationship to Non-Thermally Activated (Athermal) Martensite

The classification of martensitic displacive transformations into athermal, isothermal or anisothermal is discussed. Athermal does not mean 'no temperature dependence' as is often thought, but is best considered to be short for the notion of no thermal activation. Processes with no thermal activation do not depend on time, as there is no need to wait for sufficient statistical fluctuations in some specific order parameter to overcome an activation barrier to initiate the process. Clearly, this kind of process contrasts with those that are thermally activated. In the literature, thermally activated martensites are usually termed isothermal martensites, suggesting a constant temperature. Actually such martensites also typically occur with continuous cooling. The important distinctive feature of these martensites is that they are thermally activated and hence are distinguishable in principle from athermal martensites. A third type of process, anisothermal, has been introduced to account for those transformations which are thought to be thermally activated but which occur on continuous cooling. They may occur so rapidly that they do not appear to have an incubation time, and hence could be mistakenly called an athermal transformation. These designations will be reviewed and discussed in terms of activation energies and kinetic processes of the various martensitic transformations.

36 MATERIALS SCIENCE↗