Search NASA⌕ Search

Engineering topics

Schwartz, Daniel K.

Publications and source records attributed to Schwartz, Daniel K..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Nanomotor-enhanced transport of passive Brownian particles in porous media

Artificial micro/nanomotors are expected to perform tasks in interface-rich and species-rich environments for biomedical and environmental applications. In these highly confined and interconnected pore spaces, active species may influence the motion of coexisting passive participants in unexpected ways. Using three-dimensional super-resolution single-nanoparticle tracking, we observed enhanced motion of passive nanoparticles due to the presence of dilute well-separated nanomotors in an interconnected pore space. This enhancement acted at distances that are large compared to the sizes of the particles and cavities, in contrast with the insignificant effect on the passive particles with the same dilute concentration of nanomotors in an unconfined liquid. Experiments and simulations suggested an amplification of hydrodynamic coupling between self-propelled and passive nanoparticles in the interconnected confined environment, which enhanced the effective energy for passive particles to escape cavities through small holes. This finding represents an emergent behavior of confined nanomotors and suggests new strategies for the development of antifouling membranes and drug delivery systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Elucidating the Influence of Metal Surface Composition on Organic Adsorbate Binding Using Active Particle Dynamics

The adsorption strengths of organic compounds on metal surfaces are sensitive to the metal composition, and they play a central role in many catalytic reactions, helping to control the coverage of the reactant and altering the overall reaction rate. While adsorption energies are straightforward to measure and calculate in vacuum and gas-phase environments, adsorption energetics can be dramatically altered by the presence of solvent in liquid-phase reactions. However, the effects of metal composition on binding strengths in a liquid environment are less well understood, primarily due to the difficulty of accurate in situ measurements of organic binding on metal surfaces in the liquid phase. Here, we utilize the motion of active particles in water to probe the adsorption energies of an organic adsorbate (furfural) on a range of metal surfaces (pure Pd, pure Pt, and four PdAu alloy compositions) to elucidate the effect of metal composition. Janus particles with catalytic caps of particular metal compositions all exhibited active motion resulting from consumption of H 2 O 2 ; adsorbate binding was inferred through the decrease in the velocity of active motion and was modeled by a Langmuir adsorption isotherm. The measured adsorption affinities were used to extract the adsorption enthalpy of furfural on the different metals. The Pd surface was found to bind furfural more strongly than the Pt surface by some 10 kJ/mol. Furthermore, the adsorption of furfural on the alloys was found to increase monotonically in magnitude with Pd content. As a result, the data reported herein aid the development of accurate understanding of organic adsorption in the presence of solvent and the role of the metal surface in tuning adsorption strengths to optimize catalytic processes in the liquid phase.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effects of Surface Hydrophobicity on Catalytic Transfer Hydrogenation of Styrene with Formic Acid in a Biphasic Mixture

Transfer hydrogenation (TH) of unsaturated hydrocarbons with formic acid (FA) is an attractive processing pathway for the reduction of lignocellulosic pyrolysis oils. The low solubility of hydrophobic bio-oil species in water and FA in oil necessitates the use of a biphasic system as the reaction environment. Here, we report the effects of Pd/silica catalyst surface wettability on the TH reaction rate. Modification of the surface with short chain (C1–C4) alkyl silanes resulted in an increase in the reaction rate as compared to the unmodified catalyst. In contrast, modification of the surface with sulfonate (hydrophilic) and C18 alkyl silanes (hydrophobic) resulted in a decrease in the reaction rate as compared to the unmodified catalyst. Here, the results are discussed in terms of the catalyst interfacial activity and relative affinity of the reagents to the Pd active sites. An observed change in the apparent reaction order in styrene for a hydrophilic catalyst suggests that changing catalyst surface wettability from hydrophilic to hydrophobic resulted in a switch from a transport-limited to a kinetic-limited reaction regime.

09 BIOMASS FUELS↗
DOE OSTI2022

Investigating Deposition Sequence During Synthesis of Pd/Al2O3 Catalysts Modified with Organic Monolayers

Modification of supported metal catalysts with self-assembled monolayers (SAMs) has been shown to improve selectivity and turnover frequencies (TOFs) for many catalytic reactions. However, these benefits are often accompanied by a decrease in overall mass activity due to partial blocking of active sites by the monolayers. Therefore, a potential method for increasing site accessibility is to deposit the active metal (e.g., Pd) after deposition of a SAM modifier on the support material. In this work, Pd/Al2O3 catalysts were synthesized using both a conventional, "metal-first" sequence in which the phosphonic acid (PA) SAM was deposited on Pd/Al2O3 and a "SAM-first" technique in which the ligands were deposited onto the support prior to deposition of the metal. Although metal-first catalysts showed a significant increase in TOF during benzyl alcohol HDO, they exhibited only a modest increase in overall mass activity due to a decrease in the number of active sites. Meanwhile, SAM-first catalysts showed similar improvements in TOF and toluene selectivity but exhibited significantly improved HDO rates compared to metal-first catalysts. The rate increase was attributed to reduced site blocking as evidenced by CO chemisorption measurements. Additionally, analysis of catalysts having high Pd loadings using transmission electron microscopy (TEM) showed that SAM-first catalysts generally resulted in lower average particle sizes than traditionally modified and unmodified catalysts, suggesting that precoating the support surface with PAs changes the way that Pd is deposited during incipient wetness, leading here to improved activity.

catalytic reactions↗
DOE OSTI2022

Probing surface-adsorbate interactions through active particle dynamics

Adsorbate molecules present in a reaction mixture may bind to and block catalytic sites. Measurement of the surface coverage of these molecules via adsorption isotherms is critical for modeling and design of catalytic reactions on surfaces. However, it is challenging to measure isotherms in solution in a way that is directly relevant to catalytic activity under reaction conditions, particularly since adsorbates may bind with an enormous range of surface affinity parameters. Here we used the motion of self-propelled catalytic Janus particles, which employ the decomposition of hydrogen peroxide fuel as a propulsion mechanism, to determine the effective surface coverage of thioglycerol, furfural, and ethanol on a platinum surface as a function of concentration in aqueous solution by measuring the decrease in active motion due to the blocking of active sites. For strongly adsorbing thioglycerol, this effective coverage was compared and contrasted to the total adsorbed amount measured using inductively-coupled plasma analysis. Demonstrating the broad applicability of this approach, the surface affinity of the three adsorbates spanned more than four orders of magnitude. For each species, the adsorbate-mediated attenuation of active motion occurred over a wide concentration range and was well-described by a Langmuir isotherm. The strongly interacting thioglycerol had the highest affinity towards the surface (K a = 15.5 ± 4.3 mM –1 ) and fully deactivated the active particle motion at surface saturation. Furfural had an intermediate affinity (K a = 0.42 ± 0.07 mM –1 ) but did not fully block H 2 O 2 access to the surface at apparent saturation, consistent with a maximum fractional surface coverage of θ max = 0.67. Ethanol exhibited even lower affinity (K a = 0.0025 ± 2x10 -4 mM –1 ) and its coverage saturated at only θ max = 0.38. Analysis of isotherms at elevated temperatures enabled direct extraction of the enthalpies of adsorption. The degree of surface coverage at adsorbate saturation appeared to correlate with the relative energies of adsorption for the different adsorbate species and was consistent with adsorbate saturation of one of multiple active site populations towards H 2 O 2 decomposition. Furthermore, computational investigations into solvent effects on furfural adsorption showed good quantitative agreement with the experimental results. This work leverages unique properties of active particles to explore fundamental catalysis questions and demonstrates a novel paradigm for significant and experimentally accessible multidisciplinary research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗