Engineering topics

Scott E Stapleton

Publications and source records attributed to Scott E Stapleton.

4 records

NASA NTRS2024

Multiscale Modeling of Thermoplastics Using Atomistic-informed Micromechanics

A multiscale repeating unit cell model of a single spherulite containing four disparate length scales was developed to predict the thermoelastic behavior of semicrystalline thermoplastic materials for composite aerospace applications. The continuum level scales were fully coupled and modeled using the generalized method of cells and the high fidelity generalized method of cells micromechanics theories. Data from molecular dynamics simulations were used as inputs for the amorphous and crystalline constituents in the multiscale continuum models. Effective Young’s modulus, shear modulus, Poisson’s ratio, coefficient of thermal expansion, and thermal conductivity were predicted for polyether ether ketone and polyether ketone ketone, showing good agreement with the available experimental data from the open literature. Moreover, it is shown that predicted properties are fairly insensitive to the fidelity of the micromechanics model used at the highest continuum scale or the assumed shape of the spherulite.

thermoplastics↗

NASA NTRS2020

An Algorithm for Characterization of Fiber Aggregation in Composite Microstructures

Composite structures are susceptible to localized flaws, or variability, that drive global failure. To capture this variance, a multiscale model needs to be introduced that not only accurately represents the statistical nature of the composite microstructure but is also efficient. At the microscale, fiber aggregation creates local stress concentrations, where failure is likely to occur sooner than expected. A method of rapid microstructure generation, in conjunction with cluster characterization, is examined to develop accurate reproductions of 2D composite cross-sections. Parameterization of shape and size of fiber clusters is used to characterize representative volume elements. The discrete element method is used to generate pseudo-microstructures. The clustering parameters from the pseudo- and actual microstructure arrangements (obtained from micrographs) can be compared to determine the validity of the representative volume element generated with the discrete element method. Results show a promising approach to evaluating randomness of fiber distributions and how to accurately recreate microstructures for strength analysis.

Carbon fiber↗

NASA NTRSDate not supplied

Modeling the Stochastic Response of Fiber Reinforced Composites with Varied Representative Volume Element Sizes

Fiber reinforced composites are desirable in applications where low weight and high strength are needed, but are susceptible to variability and flaws during manufacturing, making failure predictions difficult. These flaws may occur at the microscale where mechanical properties vary locally due to regions of fiber clusters and matrix pockets. In this study, a multiscale approach was taken to model 3-point bend, 4-point bend, and tensile experiments of a unidirectional composite from only having microstructure scans of these samples and constituent properties from literature. These scans were sampled with different sized windows, and statistically equivalent microstructures were generated, then simulated for stiffness, strength, and fracture toughness using a reduced order micromechanical model and NASA’s Multiscale Analysis Tool (NASMAT). Mesoscale models were created with equivalent element sizes to microstructures and properties sampled from microscale simulation results. Results showed how microscale size affects certain mechanical properties. Also shown is how well mesoscale models agree to experiments when using stochastic element properties and varying element size.

microstructure↗

NASA NTRSDate not supplied

Microscale Constitutive Model Sensitivity on Multiscale Modeling of Fiber Reinforced Composites

Fiber reinforced composites are desirable in applications where low weight and high strength are needed, but are susceptible to microscale variability during manufacturing, making failure predictions difficult. The impact microscale variability has on macroscale mechanical response is difficult to predict due to the computational efficiency needed to simulate many, large, high fidelity, microscale models. In this study, a multiscale approach was taken to model 3-point bend, 4-point bend, and tensile experiments of a unidirectional composite from only having microstructure scans of these samples and constituent properties from literature. These scans were sampled with different sized windows, and statistically equivalent microstructures were generated, then simulated for stiffness, strength, and fracture toughness using an efficient micromechanical. Mesoscale models were created where element sizes equaled microstructure size, and properties were assigned through sampling of microscale simulation results. First, this study showed the effect of using Weibull scaling on constituent matrix strength on macroscale response. Then, a comparison was made between different element sizes and experiments. Finally, model dimensions were fixed, and the effect of randomly distributed local properties alone was examined. Results showed that the scatter of strength and stiffness in the experiments could be predicted well using images of the microscale fiber morphologies and that using stochastic properties produced a 3% coefficient of variation of strength for all experiments.

statistical microstructure↗