Search NASA⌕ Search

Engineering topics

Scott Janz

Publications and source records attributed to Scott Janz.

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Satellite Remote-Sensing Capability to Assess Tropospheric-Column Ratios of Formaldehyde and Nitrogen Dioxide: Case Study During the Long Island Sound Tropospheric Ozone Study 2018 (LISTOS 2018) Field Campaign

Satellite retrievals of tropospheric-column formaldehyde (HCHO) and nitrogen dioxide (NO 2 ) are frequently used to investigate the sensitivity of ozone (O 3 ) production to emissions of nitrogen oxides and volatile organic carbon compounds. This study inter-compared the systematic biases and uncertainties in retrievals of NO 2 and HCHO, as well as resulting HCHO–NO 2 ratios (FNRs), from two commonly applied satellite sensors to investigate O 3 production sensitivities (Ozone Monitoring Instrument, OMI, and TROPOspheric Monitoring Instrument, TROPOMI) using airborne remote-sensing data taken during the Long Island Sound Tropospheric Ozone Study 2018 between 25 June and 6 September 2018. Compared to aircraft-based HCHO and NO 2 observations, the accuracy of OMI and TROPOMI were magnitude-dependent with high biases in clean environments and a tendency towards more accurate comparisons to even low biases in moderately polluted to polluted regions. OMI and TROPOMI NO 2 systematic biases were similar in magnitude (normalized median bias, NMB = 5 %–6 %; linear regression slope ≈ 0.5–0.6), with OMI having a high median bias and TROPOMI resulting in small low biases. Campaign-averaged uncertainties in the three satellite retrievals (NASA OMI; Quality Assurance for Essential Climate Variables, QA4ECV OMI; and TROPOMI) of NO 2 were generally similar, with TROPOMI retrievals having slightly less spread in the data compared to OMI. The three satellite products differed more when evaluating HCHO retrievals. Campaign-averaged tropospheric HCHO retrievals all had linear regression slopes ∼0.5 and NMBs of 39 %, 17 %, 13 %, and 23 % for NASA OMI, QA4ECV OMI, and TROPOMI at finer (0.05° x 0.05°) and coarser (0.15° x 0.15°) spatial resolution, respectively. Campaign-averaged uncertainty values (root mean square error, RMSE) in NASA and QA4ECV OMI HCHO retrievals were ~9.0 x 10 15 molecules cm –2 (∼ 50 %–55 % of mean column abundance), and the higher-spatial-resolution retrievals from TROPOMI resulted in RMSE values ∼30 % lower. Spatially averaging TROPOMI tropospheric-column HCHO, along with NO 2 and FNRs, to resolutions similar to the OMI reduced the uncertainty in these retrievals. Systematic biases in OMI and TROPOMI NO 2 and HCHO retrievals tended to cancel out, resulting in all three satellite products comparing well to observed FNRs. However, while satellite-derived FNRs had minimal campaign-averaged median biases, unresolved errors in the indicator species did not cancel out in FNR calculations, resulting in large RMSE values compared to observations. Uncertainties in HCHO retrievals were determined to drive the unresolved biases in FNR retrievals.

Matthew S. Johnson↗
NASA NTRS2020

An Algorithm for Hyperspectral Remote Sensing of Aerosols: 3. Application to the GEO-TASO Data in KORUS-AQ Field Campaign

This paper describes the third part of a series of investigations to develop algorithms for simultaneous retrieval of aerosol parameters and surface spectral reflectance from the data measured by GEOstationary Trace gas and Aerosol Sensor Optimization (GEO-TASO) instrument. Since the algorithm is designed for future hyperspectral and geostationary satellite sensors, such as Tropospheric Emissions: Monitoring of Pollution (TEMPO), it is applied to GEO-TASO data measured over the same area by different flights as part of the Korea-United Stated Air Quality Study (KORUS-AQ) field campaign in 2016. While GEO-TAOS has a spectral sampling interval of ~0.28 nm in the visible, its data is thinned through a band selection approach with consideration of atmospheric transmittance and different surface types, which yields 20 common spectral bands to be used by the algorithm. The algorithm starts with 4 common principal components (PCs) for surface spectral reflectance extracted from various spectral libraries, and the constraints of surface reflectance parameters and aerosol scattering models respectively from k- means clustering analysis of the Rayleigh-corrected GEO-TASO spectra and AERONET data. The algorithm then proceeds iteratively with an optimal estimation approach to update PCs and retrieve aerosol optical depth (AOD) until the best match between simulated and GEOS-TASO measured spectra is achieved. The spectral AODs are compared between those retrieved from GEO-TASO (x) and 7 AERONETS (y) in 440, 550, 550, 675 nm, respectively. The comparison reveals that iterative updates of surface spectral PCs (and so surface reflectance) yield significant enhancement in AOD retrievals, improving the mean linear fitting equations from y = 0.735x + 0.088 (without update of PCs) to y = 1.055x+ 0.01, and the Pearson correlation coefficient (𝑅𝑅2) from 0.54 to 0.76, respectively. Move case studies are need to further evaluate the algorithm for its application to TEMPO that carries a enhanced version of GEO-TASO instrument.

Tropospheric Emissions: Monitoring of Pollution (T↗
NASA NTRS2018

The Dawn of Geostationary Air Quality Monitoring: Case Studies from Seoul and Los Angeles

With the near-future launch of geostationary pollution monitoring satellite instruments over North America, East Asia, and Europe, the air quality community is preparing for an integrated global atmospheric composition observing system at unprecedented spatial and temporal resolutions. One of the ways that NASA has supported this community preparation is through demonstration of future space-borne capabilities using the Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) airborne instrument. This paper integrates repeated high-resolution maps from GeoTASO, ground-based Pandora spectrometers, and low Earth orbit measurements from the Ozone Mapping and Profiler Suite (OMPS), for case studies over two metropolitan areas: Seoul, South Korea on June 9, 2016 and Los Angeles, California on June 27, 2017. This dataset provides a unique opportunity to illustrate how geostationary air quality monitoring platforms and ground-based remote sensing networks will close the current spatiotemporal observation gap. GeoTASO observes large differences in diurnal behavior between these urban areas, with NO2 accumulating within the Seoul Metropolitan Area through the day but NO2 peaking in the morning and decreasing throughout the afternoon in the Los Angeles Basin. In both areas, the earliest morning maps exhibit spatial patterns similar to emission source areas (e.g., urbanized valleys, roadways, major airports). These spatial patterns change later in the day due to boundary layer dynamics, horizontal transport, and chemistry. The nominal resolution of GeoTASO is finer than will be obtained from geostationary platforms, but when NO2 data over Los Angeles are up-scaled to the expected resolution of TEMPO, spatial features discussed are conserved. Pandora instruments installed in both metropolitan areas capture the diurnal patterns observed by GeoTASO, continuously and over longer time periods, and will play a critical role in validation of the next generation of satellite measurement. These case studies demonstrate that different regions can have diverse diurnal patterns and that day-to-day variability due to meteorology or anthropogenic patterns such as weekday/weekend variations in emissions is large. Low Earth orbit measurements, despite their inability to capture the diurnal patterns at fine spatial resolution, will be essential for intercalibrating the geostationary radiances and cross-validating the geostationary retrievals in an integrated global observing system.

Geostationary↗
NASA NTRSDate not supplied

Updated assessment of TROPOMI NO2 and HCHO columns using airborne spectrometers during the MOOSE and TRACER-AQ field campaigns

Airborne spectrometer data offers the opportunity to evaluate satellite product performance without the impact of subpixel heterogeneity between the different satellite and ground-based measurement footprints. Previous measurements during the Long Island Sound Tropospheric Ozone Study were used to evaluate TROPOMI’s v1.3 NO2 product and found very strong relationships (r2=0.96) between the airborne spectrometer and TROPOMI with a systematic low bias mostly attributed to the coarse a priori profile assumption within the standard TROPOMI retrieval. This presentation will update that analysis using the most up-to-date version 2 TROPOMI NO2 product as well as expand analysis to the HCHO product. In summer 2021, NASA GeoCAPE Airborne Simulator (GCAS) collected measurements over southeast Michigan/western Ontario for the Michigan-Ontario Ozone Source Experiment (MOOSE) and Houston, Texas during the TRacking Aerosol Convection ExpeRiment – Air Quality (TRACER-AQ). Flight strategies for both deployments included repeated systematic sampling over common areas of interest coinciding with TROPOMI. During these flights, GCAS NO2 tropospheric columns are available at 250 m x 560 m resolution. Preliminary evaluation of GCAS NO2 retrievals with Pandora spectrometer data in Houston, Texas (3 sites) shows a median percent difference of 1.4% with an interquartile range of -15.5-14.9% (r2=0.72). Column HCHO was also retrieved at a slightly coarser resolution in Houston, Texas (750 m x 1680 m) showing distinct spatial patterns associated with secondary production through the oxidation of VOCs downwind of industrial facilities. Comparison to Pandora HCHO showed a low bias of ~25% (r2=0.29) with further investigation needed to identify the cause for this bias. This presentation will share how the GCAS/Pandora/TROPOMI NO2 and HCHO intercompare and will also extend analysis toward thinking about how these assets will contribute to the validation of future geostationary observations.

Laura Judd↗
NASA NTRSDate not supplied

Accelerating TEMPO Air Quality Science Through STAQS

Soon after the launch of Tropospheric Emissions: Monitoring of Pollution (TEMPO) mission, NASA is supporting the Synergistic TEMPO Air Quality Science field study (STAQS) in summer 2023. This study’s main objective is to accelerate science with geostationary air quality observations from TEMPO to better understand its use in air pollution research and applications. Science objectives include, but are not limited to, TEMPO L2 product evaluation, the interpretation of the spatiotemporal evolution of TEMPO data during air quality events, assessment of anthropogenic emissions, contributions to chemical transport modeling, and environmental justice applications. These objectives can be accomplished through the integration of satellite data with systematically repeated high-resolution aircraft- and ground-based measurements in multiple urban environments. The primary urban cities considered include Los Angeles, New York City, and Chicago in June-August 2023. Measurements consist of airborne remote sensing observations of air quality constituents of nitrogen dioxide (NO2), formaldehyde (HCHO), ozone, and aerosols using the GeoCape Airborne Simulator and High-Spectral Resolution Lidar 2/Differential Absorption Lidar (HSRL2/DIAL) on the NASA JSC G-V aircraft, greenhouse gas observations from Airborne Visible InfraRed Imaging Spectrometer - Next Generation (AVIRIS-NG) and High Altitude Lidar Observatory (HALO) on the NASA LaRC G-III aircraft, and ground-based remote sensing and in situ observations of ozone, NO2, and HCHO from the Tropospheric Ozone Lidar Network (TOLNet), Pandora spectrometers, and ground-based monitoring networks. Key partnership studies providing in situ airborne observations include the NOAA Atmospheric Emissions and Reactions Observed from Megacities to Marine Areas (AEROMMA) field study on the NASA DC-8 in the same primary target areas as STAQS and Greater New York Oxidant, Tropospheric Halogens, and Aerosol Measurements and Modeling (GOTHAMM) field study on the NSF C-130 near New York City. This presentation will include a current status update of the STAQS mission and an overview of its measurement strategies and science objectives with the goal of promoting continued discussions for building and strengthening collaborations prior to the mission.

Laura Judd↗
NASA NTRSDate not supplied

Illustrating the Spatiotemporal Complexity of No2 Columns Using A Multi-Perspective Observing System: Moving Toward Geostationary Product Validation and Applications

As a precursor to secondary pollutants like ozone and PM2.5, nitrogen dioxide (NO2) is crucial to understand when addressing air quality issues. However, due to NO2’s short lifetime during the daytime and complexity of emission sources in urbanized regions, interpreting datasets from ground or satellite perspectives alone are challenged by variance in spatial and temporal resolutions. High resolution airborne mapping (< 1 km) of NO2 column densities across morning, midday, and afternoon add a unique perspective toward interpreting satellite data with respect to ground-measurements. This presentation focuses on the interpretation of spatiotemporal complexity of NO2 columns from the Synergistic TEMPO Air Quality Science Study (STAQS). The mission’s goal is to integrate geostationary observations from Tropospheric Emissions: Monitoring of Pollution (TEMPO) with traditional and enhanced air quality monitoring to improve the understanding of air quality science for increased societal benefit. We will demonstrate the interweaved perspective of NO2 columns from ground-based Pandora spectrometers and satellite-based observations (e.g., TROPOMI) as compared to high spatial resolution airborne observations from the GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS). This includes the evaluation of each dataset through comparison to each other to identify potential biases in data products and the impact of heterogeneity on these comparisons. Airborne data will also be used as a proxy for geostationary observations with morning, midday, and afternoon raster maps collected over four cities (Los Angeles, Chicago, Toronto, and New York City). Finally, recent research outcomes will be presented to demonstrate how airborne and geostationary observations can be used to evaluate emission inventories and air quality models.

Laura Judd↗
NASA NTRSDate not supplied

A NASA Airborne Lens Into Air Quality Field Studies of the Last Decade

Field studies add an enhanced perspective to our everyday observing system for air quality with the goals of better understanding the air we breathe and identifying solutions toward a healthier future. Over the last decade, over 10 air quality field studies were conducted around the US with other ranging internationally with support through large agency-led efforts down to the grass-roots collaborative style. This presentation will highlight how NASA airborne observations have fit as one piece of the integrated observing system for air quality during these field studies. Research topics to be discussed are centered around the idea of the transition to geostationary air quality satellite observations. Specific topics include how temporally and spatially resolved measurements help us learn about knowledge gaps in NOx emissions, satellite-proxies for surface air quality, as well as evaluating state-of-the-art chemical transport models and using the enhanced observations as tools for understand what models/satellites can and cannot resolve. Each research topic will aim to discuss how the field measurement strategies that made this work possible as well as specific challenges that still exist to take these results further. Lastly, this presentation will discuss strategies to be carried forward as well as new ones as a peek into future air quality airborne field work.

Laura Judd↗