Search NASA⌕ Search

Engineering topics

Scott, George N

Publications and source records attributed to Scott, George N.

IEA Wind TCP Task 37: Definition of the IEA 15-Megawatt Offshore Reference Wind Turbine

This report describes a 15-megawatt offshore wind turbine with a fixed-bottom monopile support structure. This reference wind turbine is a Class IB direct-drive machine, with a rotor diameter of 240 meters and a hub height of 150 meters. An overview of the design is presented in Figure ES-1 and Table ES-1. The design reflects a joint effort between the National Renewable Energy Laboratory, sponsored by the U.S. Department of Energy, and the Technical University of Denmark, sponsored by the European Union's H2020 Program, through the second work package of International Energy Agency Wind Task 37 on Wind Energy Systems Engineering: Integrated RD&D. A forthcoming report will detail a semisubmersible floating support structure developed by the University of Maine.

15 MW↗

Comparison of Mesoscale Model Setups for Offshore Wind Resource Assessment: A New Jersey Case Study

As the offshore wind energy industry begins to emerge on the U.S. northeast coast, there is an urgent need for an accurate characterization of the offshore wind resource. The offshore regime features various resource characteristics not seen onshore, including frequent coastal low-level jets, non-steady surface conditions (e.g. waves), complex air-sea and land-sea interactions, and coastal mesoscale circulations (e.g. sea breeze). An accurate characterization of these phenomena in mesoscale models is critical to support accurate energy production estimates and forecasting for future offshore wind farms. However, a robust validation of mesoscale model performance in the offshore U.S. has been limited due to sparse data and difficulty obtaining offshore measurements. Consequently, it is unclear how mesoscale models perform offshore and which suite of parameterizations and input data are best suited for accurate resource characterization. To begin addressing this knowledge gap, the National Renewable Energy Laboratory, in collaboration with the Rutgers Center for Ocean Observing Leadership, conducted a mesoscale model validation campaign in the offshore environment. The Weather Research and Forecasting (WRF) model was assessed and the New Jersey offshore coastal area served as the validation domain. An ensemble of WRF simulations conducted over a one-year period sampled from a range of model setups, including different reanalysis and forecast data inputs, sea surface temperature data inputs, planetary boundary layer parameterizations, and WRF versions. The performance of each ensemble member was validated against a network of observations including offshore floating lidars, coastal met towers, offshore platform measurements, and offshore buoys. Model performance was assessed on annual, seasonal, and diurnal scales with particular emphasis on the vertical wind speed profile and temperature stratification. Preliminary results from this validation work will be presented here. The key WRF inputs and parameters driving changes in the modeled wind resource will be discussed and preliminary recommendations on WRF setups for offshore wind resource modeling will be proposed. The application of this validation exercise to other proposed offshore wind energy areas in the U.S. will also be discussed. mesoscale circulations (e.g. sea breeze). An accurate characterization of these phenomena in mesoscale models is critical to support accurate energy production estimates and forecasting for future offshore wind farms. However, a robust validation of mesoscale model performance in the offshore U.S. has been limited due to sparse data and difficulty obtaining offshore measurements. Consequently, it is unclear how mesoscale models perform offshore and which suite of parameterizations and input data are best suited for accurate resource characterization. To begin addressing this knowledge gap, the National Renewable Energy Laboratory, in collaboration with the Rutgers Center for Ocean Observing Leadership, conducted a mesoscale model validation campaign in the offshore environment. The Weather Research and Forecasting (WRF) model was assessed and the New Jersey offshore coastal area served as the validation domain. An ensemble of WRF simulations conducted over a one-year period sampled from a range of model setups, including different reanalysis and forecast data inputs, sea surface temperature data inputs, planetary boundary layer parameterizations, and WRF versions. The performance of each ensemble member was validated against a network of observations including offshore floating lidars, coastal met towers, offshore platform measurements, and offshore buoys. Model performance was assessed on annual, seasonal, and diurnal scales with particular emphasis on the vertical wind speed profile and temperature stratification. Preliminary results from this validation work will be presented here. The key WRF inputs and parameters driving changes in the modeled wind resource will be discussed and preliminary recommendations on WRF setups for offshore wind resource modeling will be proposed. The application of this validation exercise to other proposed offshore wind energy areas in the U.S. will also be discussed.

17 WIND ENERGY↗

Wind Turbine Optimization with WISDEM

This presentation for the Fourth Wind Energy Systems Engineering Workshop explains the NREL wind energy systems engineering initiative-developed analysis platform and research capability to capture important system interactions to achieve a better understanding of how to improve system-level performance and achieve system-level cost reductions. Topics include Wind-Plant Integrated System Design and Engineering Model (WISDEM) and multidisciplinary design analysis and optimization.

17 WIND ENERGY↗