Search NASA⌕ Search

Engineering topics

Scott, Trevor S.

Publications and source records attributed to Scott, Trevor S..

Evaluation of High Level Waste Sludge Processing Behavior

The U.S. Department of Energy’s (DOE) Hanford Site has 177 underground storage tanks that contain wastes from past nuclear fuel reprocessing and waste-management operations. Over 20% of this waste is in the form of an insoluble sludge that will require slurry modification before its transfer to the Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred to the WTP. One challenging requirement relates to the undissolved solids (UDS) composition in a waste feed because the waste contains solid particles that settle, and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty is the ability to transfer and mix wastes with large variations in UDS concentrations and resulting settling rates. To address this uncertainty, a number of small scale mixing and settling tests have been conducted to determine the mobilization performance of variable chemistry simulants. Comparison of the size and density of the particulate for each simulant to that of southeast area Hanford sludge was made using metrics for particle mobilization, suspension, settling, and pipeline transfer where dependance on particle size and density may be different, including: 1. Settling velocity, 2. Critical shear stress for erosion, 3. Just-suspended impeller speed, and 4. Pipeline critical transport velocity. Existing high-level waste sludge data has shown the effect that increasing Al concentration has on resulting settled solids. This differential settling of particles in the sludge has the possibility of resulting in solids segregation during feed preparation and uneven particle distribution during pipeline transportation or mixer jet pump operations. Understanding the predictive capabilities of HLW solids settling and transport as well as potential remedies for addressing disparate sludge behaviors can help provide technical guidance during HLW flowsheet planning.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Plutonium Particles in Samples Extracted from Hanford Tank Waste TX-118 and SY-102 (Interim Report)

This is an interim report on the characterization of plutonium particles from Hanford wastes. Plutonium-bearing particles were located in Hanford Waste Tank solids, SY-102 and TX-118. The particles in SY-102 were small, typically < 5 to 10 µm in length, and were crystalline plutonium oxide with an association of other elements at minor levels, including bismuth, phosphate, and iron based on Sanning Electron Microscopy (SEM) observations. Plutonium particles from SY-102 were extracted from the surface mount using the SEM-Focused Ion Beam (FIB) and prepared for Scanning Transmission Electron Microscopy (STEM). This was the first time that this type of analysis of Hanford tank waste solids has been attempted. The STEM analysis indicated a complex co-precipitation of plutonium oxide with bismuth and phosphate. Diffraction and imaging only partially matched with a PuO 2 phase. Pockets of phosphate and bismuth reside within the plutonium oxide suggesting that these phases formed at the same time. The SEM analysis indicated that the plutonium particles from TX-118 were a mixed bismuth-phosphate phase and plutonium oxide. These particles will be examined with SEM-FIB at a later time and then will undergo more detailed examination in the STEM.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗