Search NASASearch

Engineering topics

Scowen, Paul

Publications and source records attributed to Scowen, Paul.

The Case for Probe-Class NASA Astrophysics Missions

Astrophysics spans an enormous range of questions on scales from individual planets to the entire cosmos. To address the richness of 21st century astrophysics requires a corresponding richness of telescopes spanning all bands and all messengers. Much scientific benefit comes from having the multi-wavelength capability available at the same time. Most of these bands, or measurement sensitivities, require space-based missions. Historically, NASA has addressed this need for breadth with a small number of flagship-class missions and a larger number of Explorer missions. While the Explorer program continues to flourish, there is a large gap between Explorers and strategic missions.

Elvis, Martin

The Star-Planet Activity Research CubeSat (SPARCS): A Mission to Understand the Impact of Stars in Exoplanets

The Star-Planet Activity Research CubeSat (SPARCS) is a NASA-funded astrophysics mission, devoted to study the ultraviolet (UV) time-domain behavior in low-mass stars. Given their abundance and size, low-mass stars are important targets in the search for habitable-zone, extrasolar planets. However, not enough is known about the stars flare and quiescent emission, which powers photochemical reactions on the atmospheres of possible planets. Over its 1-year mission, SPARCS will stare at ~10 stars in order to measure short- (minutes) and long- (months) term variability simultaneously in the near-UV (NUV – 280 nm) and far-UV (FUV – 162 nm). SPARCS payload consists of a 9-cm reflector telescope paired with two high-sensitivity 2D-doped CCDs. The detectors are kept passively cooled at 238K, in order to reduce dark-current contribution. The filters have been selected to provide strong rejection of longer wavelengths, where most of the starlight is emitted. The payload will be integrated within a 6U CubeSat to be placed on a Sun-synchronous terminator orbit, which allows for long observing stares for all targets. Launch is expected to occur not earlier than October 2021.

Zellem, Robert

The Exoplanet Climate Infrared TElescope (EXCITE)

Although there are a large number of known exoplanets, there is little data on their global atmospheric properties.Phase-resolved spectroscopy of transiting planets - continuous spectroscopic observation of planets during their full orbits - probes varied depths and longitudes in the atmospheres thus measuring their three-dimensional thermal and chemical structure and contributing to our understanding of their global circulation. Planets with characteristics suitable for atmospheric characterization have orbits of several days, so phase curve observations are highly resource intensive, especially for shared use facilities. The Exoplanet Climate Infrared TElescope (EXCITE) is a balloon-borne near-infrared spectrometer designed to observe from 1 to 5 meters to perform phase-resolved spectroscopy of hot Jupiters. Flying from a long duration balloon (LDB) platform, EXCITE will have the stability to continuously stare at targets for days at a time and the sensitivity to produce data of the quality and quantity needed to signicantly advance our understanding of exoplanet atmospheres. We describe the EXCITE design and show results of analytic and numerical calculations of the instrument sensitivity. We show that an instrument like EXCITE will produce a wealth of quality data, both complementing and serving as a critical bridge between current and future space-based near infrared spectroscopic instruments.

Spectroscopy

HabEx Space Telescope Optical System Overview: General Astrophysics Instruments

The HabEx (Habitable Exoplanet) concept study is defining a future space telescope with the primary mission of detecting and characterizing planetary systems around nearby stars. The telescope baseline design includes a high-contrast coronagraph and a starshade to enable the direct optical detection of exoplanets as close as 70 mas to their star. In addition to the study of exoplanets, HabEx carries two dedicated instruments for general astrophysics. The first instrument is a camera enabling imaging on a 3 arc minute field of view in two bands stretching from the UV at 150 nm to the near infrared at 1800 nm. The same instrument can also be operated as a multi-object spectrograph, with resolution of 2000. The second instrument is a high-resolution UV spectrograph operating from 300 nm down to 115 nm with up to 60,0000 resolution. HabEx would provide the highest resolution UV/optical images ever obtained. Diffraction limited at 0.4 µm, it would outperform all current and approved facilities, including the 30 m class ground-based extremely large telescopes (ELTs), which will achieve ~0.01 arcsecond resolution at near-infrared (IR) wavelengths with adaptive optics, but will be seeing-limited at optical wavelengths. HabEx would observe wavelengths inaccessible from the ground, including the UV and in optical/near-IR atmospheric absorption bands. Operating at L2, far above the Earth’s atmosphere and free from the large thermal swings inherent to HST’s low-Earth orbit, HabEx would provide an ultra-stable platform that will enable science ranging from precision astrometry to the most sensitive weak lensing maps ever obtained. Here we discuss the design concepts of the general astrophysics optical instruments for the proposed observatory.

Nissen, Joel

Telecommunication System Design for Interplanetary CubeSat Missions: LunaH-Map

The Lunar Hydrogen Mapper (Luna H-Map) will be one of 13 CubeSats to launch on the first integrated flight of NASA’s Space Launch System and Orion spacecraft in 2018. The goal of the LunaH-Map mission is to map the hydrogen content of the entire South Pole of the moon, including permanently shadowed regions at high resolution. The spacecraft is a 6 U CubeSat and the main instrument is a neutron spectrometer which will be used to perform the measurements required to accomplish the primary science objective. Once LunaH-Map reaches the Moon, the spacecraft will perform a 60 - day science mission, consisting of 141 science orbits during which the measurements will be taken. In the design of the LunaH-Map spacecraft, one of the main challenges is the elecommunication system as the spacecraft needs the ability to relay data during the long cruise phase and during the science phase. In addition, the telecommunication system needs to support the main navigation functions required to reach the Moon and to insert in the highly elliptical orbit required for the science phase. This paper covers the main aspects of the telecommunication design for the mission including: link and coverage analysis, waveform selection and spectral constraints, hardware selection and ground station coordination.

Babuscia, Alessandra

The Habitable Exoplanet (HabEx) imaging mission concept: preliminary science drivers and technical requirements

HabEx is one of 4 possible NASA flagship mission concepts studied for a possible launch in the 2030s. It will be optimized for direct imaging and spectroscopy of habitable exoplanets, and will also enable a wide range of general astrophysics observations. HabEx shall characterize full planetary systems around nearby solar-type stars for the first time, including rocky planets, possible water worlds, gas giants, ice giants, and faint circumstellar debris disks. It will in particular explore our nearest neighbor planetary systems and search for signs of habitability and bio-signatures in the atmospheres of rocky planets. Such high spatial resolution high contrast observations require a large (~3.5 to 8m) stable diffraction- limited optical space telescope, which also opens new unique capabilities for studying the formation and evolution of stars and galaxies. We present here some preliminary science objectives identified for HabEx by our Science and Technology Definition Team (STDT), together with a first look at the key challenges and design trades ahead.

Mennesson, Bertrand

Aluminum Mirror Coatings for UVOIR Telescope Optics Including the Far UV

NASA Cosmic Origins (COR) Program identified the development of high reflectivity mirror coatings for large astronomical telescopes particularly for the far ultra violet (FUV) part of the spectrum as a key technology requiring significant materials research and process development. In this paper we describe the challenges and accomplishments in producing stable high reflectance aluminum mirror coatings with conventional evaporation and advanced Atomic Layer Deposition (ALD) techniques. We present the current status of process development with reflectance of approx. 55 to 80% in the FUV achieved with little or no degradation over a year. Keywords: Large telescope optics, Aluminum mirror, far UV astrophysics, ALD, coating technology development.

large telescope optics

Scientific Objectives for UV/Visible Astrophysics Investigations: A Summary of Responses by the Community (2012)

Following several recommendations presented by the Astrophysics Decadal Survey 2010 centered around the need to define "a future ultraviolet-optical space capability," on 2012 May 25, NASA issued a Request for Information (RFI) seeking persuasive ultraviolet (UV) and visible wavelength astrophysics science investigations. The goal was to develop a cohesive and compelling set of science objectives that motivate and support the development of the next generation of ultraviolet/visible space astrophysics missions. Responses were due on 10 August 2012 when 34 submissions were received addressing a number of potential science drivers. A UV/visible Mission RFI Workshop was held on 2012 September 20 where each of these submissions was summarized and discussed in the context of each other. We present a scientific analysis of these submissions and presentations and the pursuant measurement capability needs, which could influence ultraviolet/visible technology development plans for the rest of this decade. We also describe the process and requirements leading to the inception of this community RFI, subsequent workshop and the expected evolution of these ideas and concepts for the remainder of this decade.

Conference Summary

Delta-Doped High Purity Silicon UV-NIR CCDs with High QE and Low Dark Current

Delta doping process was developed on p-channel CCDs for MIDEX-Orion and JDEM/SNAP and was applied to large format (2k x4k) CCDs. Delta doping is applied to fully-fabricated CCDs (complete with Al metallization). High QE and low dark current is demonstrated with delta doped p-channel CCDs. In-house AR coating is demonstrated. Advantages include: Delta doping enables high QE and stability across the entire spectral range attainable with silicon. Delta doping is a low temperature process and is compatible with fully-fabricated detector arrays. Same base device for Orion two channels. High radiation tolerance and no thinning requirements of high purity p-channel. CCDs are additional advantages.

Orion

Gas near the center of 30 Doradus as revealed by Hubble Space Telescope images

We present images of a 40 pc region of the 30 Doradus nebula centered about 1 arcminute north of the luminous star cluster R136 in the Large Magellanic Cloud. The region was imaged with the Hubble Space Telescope (HST) Wide Field Camera through H alpha, (S II), and stellar continuum filters. These data allow us to examine this region of star formation and the breakup of the cloud around R136 on a scale of 0.027 pc per pixel. We also present a complementary ground-based echelle spectrum of the H alpha and (N II) emission lines in this region. In the images one sees an extensive filamentary structure surrounding regions that have been hollowed out by R136 and other massive stars in the area. The (S II) image shows a sharper, more filamentary appearance than the H alpha image, and the filaments are offset in (S II) generally away from R136. These characteristics are indicative of ionization fronts that are outlining the neutral material and dust features. We also find fingers of enhanced (S II) emission located about 90 sec to the northwest of R136. The (S II) fingers appear to be readiating generally from a common region, and we suggest that they are composed of material ablated from the high density gas of the ionization fronts and entrained with the flow of the stellar winds from R136. We find that a small knot of emission resolves into two shells of about 0.5 pc diameter, each of which encircles one or two stars. One of the stars has been identified as an early main-sequence O star by Walborn & Blades (1987), and the shell could be a young wind-blown bubble. We also find a parabolic-shaped arc at the head of a long cone that opens up away from R136. The arc is located near a luminous candidate protostar identified by Hyland et al. (1992).

Hunter, Deidre A.

Age structure of refractory interstellar dust and isotopic consequences

A sputtering and recycling Monte Carlo model, developed by Liffman and Clayton (1988) is used to calculate the distribution of existence times of the matter in interstellar dust composed of refractory metals. The mean age of each dust particle is defined not as the time it has existed but rather as the mass-weighted existence times of its parts at t = 6 Gyr of the modeled solar system formation. It is shown that Galactic evolution generates a mean correlation, applying to large numbers of particles binned according to size rather than according to individual particles, whose mean ages fluctuate statistically. The cosmochemical consequence is that if interstellar particles can be dynamically sorted into separate size populations during the aggregation history of solar system bodies, the collections of larger grains will constitute matter that is chemically older than collections of smaller grains. The macroscopic age difference generates isotopic anomalies by virtue of the time dependence of the secondary/primary nucleosynthesis yields. Results are compared with three different prescriptions for the sputtering of interstellar dust.

Clayton, Donald D.