Search NASA⌕ Search

Engineering topics

Scruggs, R. M.

Publications and source records attributed to Scruggs, R. M..

Analysis of dynamic stall using unsteady boundary-layer theory

The unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself. The predicted delay in flow-reversal onset, and its variation with pitch rate, are shown to be in reasonable agreement with experimental data relating to the delay in dynamic stall. From the comparisons it can be concluded (a) that the effects of time-dependence are sufficient to explain the failure of the boundary layer to separate during the dynamic overshoot, and (b) that there may be some link between forward movement of the reversal point and dynamic stall.

Scruggs, R. M.↗

Analysis of flow-reversal delay for a pitching airfoil

The coupled unsteady turbulent boundary layer and potential flow about a pitching airfoil are analyzed using numerical methods to determine the effect of pitch rate on the delay in forward movement of the rear flow reversal point. An explicit finite difference scheme is used to integrate the unsteady boundary layer equations, which are coupled at each instant of time to a fully unsteady and nonlinear potential flow analysis. A substantial delay in forward movement of the reversal point is demonstrated with increasing pitch rate, and it is shown that the delay results partly from the alleviation of the gradients in the potential flow, and partly from the effects of unsteadiness in the boundary layer itself.

Scruggs, R. M.↗

Three dimensional compressible boundary-layer computations for a finite swept wing

Three-dimensional, compressible turbulent boundary-layer calculations have been performed for the finite supercritical wing of the NASA modified F8 transonic research airplane. Data on the boundary-layer thickness, displacement thickness, skin friction components, and integrated streamwise skin friction are presented for points along the streamwise stations of which the pressure measurements were previously made. Representative velocity profiles are shown, and boundary-layer-thickness contour plots and skin-friction vector plots are presented. Results are given for a Reynolds number of 1.5 million per foot, and for Mach numbers of 0.50 and 0.99.

Nash, J. F.↗

Additional three-dimensional boundary-layer computations for a finite swept wing

Calculations have been made of the three-dimensional, compressible, turbulent boundary layer on the finite supercritical wing of the NASA modified F-8 transonic research airplane. The calculations were based on the wing pressure distribution measured in flight at M = 0.90, instead of on wind tunnel data at M = 0.50 and 0.99. Data on the boundary-layer thickness, displacement thickness, skin-friction components, and integrated streamwise skin friction are presented for points along the streamwise stations at which pressure measurements were made.

Nash, J. F.↗