Search NASA⌕ Search

Engineering topics

Seebass, A. R.

Publications and source records attributed to Seebass, A. R..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Waverider design for generalized shock geometries

A new design method for waverider configurations with generalized shock geometries is presented. A cross-stream Euler marching procedure is used to define the post-shock flow field, and an arbitrary 3D shock shape is specified as an input. This approach makes it possible to use nonaxisymmetric shock topologies with nonconstant shock strengths. The problem is reformulated in the proper curvilinear coordinate system to suppress its fundamental ill-posedness.

Jones, K. D.↗
NASA NTRS1985

Shock-free turbomachinery blade design

A computational method for designing shock-free, quasi-three-dimensional, transonic, turbomachinery blades is described. Shock-free designs are found by implementing Sobieczky's fictitious gas principle in the analysis of a baseline shape, resulting in an elliptic solution that is incorrect in the supersonic domain. Shock-free designs are obtained by combining the subsonic portion of this solution with a characteristic calculation of the correct supersonic flow using the sonic line data from the fictitious elliptic solution. This provides a new, shock-free blade design. Examples presented include the removal of shocks from two blades in quasi-three-dimensional flow and the development of a series of shock-free two-dimensional stators. The new designs all include modifications to the upper surface of an experimental stator blade developed at NASA Lewis Research Center. While the designs presented here are for inviscid flow, the same concepts have been successfully applied to the shock-free design of airfoils and three-dimensional wings with viscous effects. The extension of the present method to viscous flows is straightforward given a suitable analysis algorithm for the flow.

Beauchamp, P. P.↗
NASA NTRS1983

Finite area method for nonlinear supersonic conical flows

A fully conservative numerical method for the computation of steady inviscid supersonic flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell; a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is symmetrized by adding artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigators.

Sritharan, S. S.↗
NASA NTRS1982

Finite area method for nonlinear conical flows

A fully conservative finite area method for the computation of steady inviscid flow about general conical bodies at incidence is described. The procedure utilizes the potential approximation and implements a body conforming mesh generator. The conical potential is assumed to have its best linear variation inside each mesh cell and a secondary interlocking cell system is used to establish the flux balance required to conserve mass. In the supersonic regions the scheme is desymmetrized by adding appropriate artificial viscosity in conservation form. The algorithm is nearly an order of a magnitude faster than present Euler methods and predicts known results accurately and qualitative features such as nodal point lift off correctly. Results are compared with those of other investigations.

Sritharan, S. S.↗
NASA NTRS1981

Shock-free configurations in two-and three-dimensional transonic flow

Efforts to replace Sobieczky's complicated analog computations of solutions to the hodograph equations by a fast elliptic solver in order to generate shock-free airfoil designs more effectively are described. The indirect design of airfoil and wing shapes that are free from shock waves even though the local flow velocity exceeds the speed of sound is described. The problem of finding an airfoil in two dimensional, irrotational flow that has a prescribed pressure distribution is as addressed. Sobieczky's suggestion to use a fictitious gas for finding shock-free airfoils directly in the physical plane was the basis for a more efficient procedure for achieving the same end.

Seebass, A. R.↗
NASA NTRS1981

Transonic flow studies

Major emphasis was on the design of shock free airfoils with applications to general aviation. Unsteady flow, transonic flow, and shock wave formation were examined.

Seebass, A. R.↗
NASA NTRS1978

A new method for designing shock-free transonic configurations

A new method for the design of shock-free supercritical airfoils, wings, and three-dimensional configurations is described. Results illustrating this procedure in two and three dimensions are given. They include modifications to part of the upper surface of an NACA 64A410 airfoil that will maintain shock-free flow over a range of Mach numbers for a fixed lift coefficient, and the modifications required on part of the upper surface of a swept wing with an NACA 64A410 root section to achieve shock-free flow. While the results are given for inviscid flow, the same procedures can be employed iteratively with a boundary layer calculation in order to achieve shock-free viscous designs. With a shock-free pressure field the boundary layer calculation will be reliable and not complicated by the difficulties of shock-wave boundary-layer interaction.

Sobieczky, H.↗
NASA NTRS1978

A new method for designing shock-free transonic configurations

A method for the design of shock free supercritical airfoils, wings, and three dimensional configurations is described. Results illustrating the procedure in two and three dimensions are given. They include modifications to part of the upper surface of an NACA 64A410 airfoil that will maintain shock free flow over a range of Mach numbers for a fixed lift coefficient, and the modifications required on part of the upper surface of a swept wing with an NACA 64A410 root section to achieve shock free flow. While the results are given for inviscid flow, the same procedures can be employed iteratively with a boundary layer calculation in order to achieve shock free viscous designs. With a shock free pressure field the boundary layer calculation will be reliable and not complicated by the difficulties of shock wave boundary layer interaction.

Sobieczky, H.↗
NASA NTRS1977

Unsteady transonic flow computations

The numerical procedures previously developed for computing nonlinear and time-linearized small-perturbation unsteady transonic flows are briefly reviewed, and the effects of unsteady modes of motion on two-dimensional transonic flows are evaluated. The numerical procedure used comprises an alternating-direction implicit scheme and treats shock waves as discontinuities in the flow. Comparison of the time-linearized results with fully nonlinear calculations delineates their range of applicability. The unsteady behavior due to harmonic pitching and flap oscillations of an NACA airfoil is also examined.

Seebass, A. R.↗
NASA NTRS1977

An implicit shock-fitting scheme for unsteady transonic flow computations

The alternating-direction implicit scheme developed by NASA Ames for unsteady transonic flows has been modified to include a shock-fitting algorithm as well as an analytically stretched coordinate system. The shock-fitting procedure treats shock waves as discontinuities normal to the free stream. Improvements in shock position and the unsteady pressure distributions are obtained by this modification. The various types of shock motion observed experimentally by Tijdeman are well simulated in calculations using the modified computational scheme. The method of detecting shock wave formation and the procedure for fitting a moving shock wave are illustrated. Results for a pulsating parabolic arc airfoil and for an NACA 64A006 airfoil with oscillating quarter-chord flap are presented and discussed.

Yu, N. J.↗
NASA NTRS1976

Numerical simulation of small perturbation transonic flows

The results of a systematic study of small perturbation transonic flows are presented. Both the flow over thin airfoils and the flow over wedges were investigated. Various numerical schemes were employed in the study. The prime goal of the research was to determine the efficiency of various numerical procedures by accurately evaluating the wave drag, both by computing the pressure integral around the body and by integrating the momentum loss across the shock. Numerical errors involved in the computations that affect the accuracy of drag evaluations were analyzed. The factors that effect numerical stability and the rate of convergence of the iterative schemes were also systematically studied.

Seebass, A. R.↗
NASA NTRS1976

Flowfield in the plane of symmetry below a delta wing

The flowfield in the plane of symmetry of a thin lifting delta wing with supersonic leading edges is examined for wings with apex angles that are comparable to the Mach angle, as well as for the limiting case of a straight leading edge. For these two cases, a simplified treatment of the interaction between the plane expansion wave emanating from the trailing edge and the three-dimensional bow shock is presented. In the region unaffected by the wing tips, the shock decays inversely with distance from the wing.

Cramer, M. S.↗
NASA NTRS1976

Inviscid transonic flow computations with shock fitting

First- and second-order numerical procedures for calculating two-dimensional transonic flows that treat shock waves as discontinuities are discussed. This short communication illustrates their application to a simple but non-trivial problem for which there are limited theoretical results.

Yu, N. J.↗
NASA NTRS1975

Nonlinear acoustic behavior at a caustic - An approximate analytical solution

The present paper discusses an approximate analytical solution to the nonlinear behavior of a discontinuous acoustic signal near a caustic. The Seebass transformation (1970) is refined to provide results which satisfy the governing equation to any prescribed accuracy, except across the shock wave produced by reflection of the simple wave at the caustic. The solution is approximate in the sense that the basic equation is satisfied wherever the solution is continuous but can satisfy only one of the two jump conditions at the reflected shock. The results give essential geometric features of the exact solution and provide a quantitative estimate of the strength of the so-called superboom.

Gill, P. M.↗
NASA NTRS1975

Inviscid transonic flow computations with shock fitting

First-and second-order numerical procedures are presented for calculating two-dimensional transonic flows that treat shock waves as discontinuities. Their application to a simple but nontrivial problem for which there are limited theoretical results is discussed.

Yu, N. J.↗
NASA NTRS1974

Sonic boom research

The results of sonic boom research studies are presented. The purpose of the studies was as follows: (1) to minimize the sonic boom of supersonic transport aircraft, (2) to predict the distortion of the sonic boom signature by atmospheric turbulence, and (3) to predict the amplifications that occurs at a caustic, known as a superboom. The aircraft and meteorological parameters which can be used to predict sonic boom intensity are identified. A bibliography of publications on sonic booms is included.

Seebass, A. R.↗