Search NASA⌕ Search

Engineering topics

Seetharam, H. C.

Publications and source records attributed to Seetharam, H. C..

17 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

Experimental Studies of Flow Separation of the NACA 2412 Airfoil at Low Speeds

Wind tunnel tests have been conducted on an NACA 2412 airfoil section at Reynolds number of 2.2 x 10(exp 6) and Mach number of 0.13. Detailed measurements of flow fields associated with turbulent boundary layers have been obtained at angles of attack of 12.4 degrees, 14.4 degrees, and 16.4 degrees. Pre- and post-separated velocity and pressure survey results over the airfoil and in the associated wake are presented. Extensive force, pressure, tuft survey, hot-film survey, local skin friction, and boundary layer data are also included. Pressure distributions and separation point locations show good agreement with theory for the two layer angles of attack. Boundary layer displacement thickness, momentum thickness, and shape factor agree well with theory up to the point of separation. There is considerable disparity between extent of flow reversal in the wake as measured by pressure and hot-film probes. The difference is attributed to the intermittent nature of the flow reversal.

Seetharam, H. C.↗
NASA NTRS1982

Experimental studies of flow separation of three airfoils at low speeds

Wind tunnel tests were conducted on the NASA LS(1)-0421 Mod, NACA 2412 and NASA GA(W)-2 airfoil sections at a Reynolds number of 2.2 x 10(6) and a Mach number of 0.13. Detailed measurements of flow fields associated with turbulent boundary layers of these airfoils were obtained at pre-stall, near-stall, and post-stall angles of attack. Velocity and pressure survey results over the airfoil and in the associated wake, are presented for fully attached flow conditions through the stalled flow condition. Extensive force, pressure, tuft survey, hot-film survey, local skin friction and boundary layer data are also included.

Rodgers, E. J.↗
NASA NTRS1979

Split-film anemometer measurements on an airfoil with turbulent separated flow

Experimental studies of turbulent separation on airfoils have been conducted to aid in improving theoretical models of post-stall airfoil behavior. The studies utilize a variety of pressure and hot-film probes. The split-film anemometer has proved particularly valuable for measurement of highly turbulent reversing flows. Suggested techniques for on-line digital computer processing of the data are discussed.

Wentz, W. H., Jr.↗
NASA NTRS1978

Instrumentation, techniques and data reduction associated with airfoil testing programs at Wichita State University

Two dimensional airfoil testing was conducted at the Wichita State University Beech Wind Tunnel for a number of years. The instrumentation developed and adapted during this period of testing for determination of flow fields along with traversing mechanisms for these probes are discussed. In addition, some of the techniques used to account for interference effects associated with the apparatus used for this two dimensional testing are presented. The application of a minicomputer to the data reduction and presentation is discussed.

Rodgers, E. J.↗
NASA NTRS1977

Experimental studies of flow separation of the GA(W)-2 airfoil at low speeds

Wind tunnel tests have been conducted on a NASA GA(W)-2 airfoil section at Reynolds number of 2.2 x 10(exp 6) and Mach number of 0.13. Detailed measurements of flow fields associated with turbulent boundary layers have been obtained at angles of attack of 10.3, 14.4, and 18.3 deg. Pre- and post-separated velocity and pressure survey results over the airfoil and in the associated wake are presented. Extensive force, pressure, tuft survey, hot-film survey, local skin friction, and boundary layer data are also included. Pressure distributions and separation point locations show good agreement with theory for the two lower angles of attack. Boundary layer displacement thickness, momentum thickness, and shape factor agree well with theory up to the point of separation. There is considerable disparity between extent of flow reversal in the wake as measured by pressure and hot-film probes. The difference is attributed to the intermittent nature of the flow reversal.

Seetharam, H. C.↗
NASA NTRS1977

Force and pressure tests of the GA(W)-1 airfoil with a 20% aileron and pressure tests with a 30% Fowler flap

Wind tunnel force and pressure tests were conducted for the GA(W)-1 airfoil equipped with a 20% aileron, and pressure tests were conducted with a 30% Fowler flap. All tests were conducted at a Reynolds number of 2.2 and a Mach number of 0.13. The aileron provides control effectiveness similar to ailerons applied to more conventional airfoils. Effects of aileron gaps from 0% to 2% chord were evaluated, as well as hinge moment characteristics. The aft camber of the GA(W)-1 section results in a substantial up-aileron moment, but the hinge moments associated with aileron deflection are similar to other configurations. Fowler flap pressure distributions indicate that unseparated flow is achieved for flap settings up to 40 deg., over a limited angle of attack range. Theoretical pressure distributions compare favorably with experiments for low flap deflections, but show substantial errors at large deflections.

Wentz, W. H., Jr.↗
NASA NTRS1977

A low speed two-dimensional study of flow separation on the GA(W)-1 airfoil with 30-percent chord Fowler flap

Measurements of flow fields with low speed turbulent boundary layers were made for the GA(W)-1 airfoil with a 0.30 c Fowler flap deflected 40 deg at angles of attack of 2.7 deg, 7.7 deg, and 12.8 deg, at a Reynolds number of 2.2 million, and a Mach number of 0.13. Details of velocity and pressure fields associated with the airfoil flap combination are presented for cases of narrow, optimum and wide slot gaps. Extensive flow field turbulence surveys were also conducted employing hot-film anemometry. For the optimum gap setting, the boundaries of the regions of flow reversal within the wake were determined by this technique for two angles of attack. Local skin friction distributions for the basic airfoil and the airfoil with flap (optimum gap) were obtained using the razor blade technique.

Seetharam, H. C.↗
NASA NTRS1977

Studies of flow separation and stalling on one- and two-element airfoils at low speeds

Research has been conducted on the nature of airfoil behavior at pre- and post-separated angles of attack. Detailed wind tunnel studies have been made of boundary layer and wake fields for the GA(W)-1 airfoil, and the airfoil with a 0.3 chord Fowler flap. Experimental data are compared with theoretical predictions from a multi-element viscous flow computer program. Theoretical predictions are reasonably accurate for unseparated flows, but have serious errors when separation is present. Some recent techniques for modeling post-separated flow behavior are discussed in light of the present experiments.

Seetharam, H. C.↗
NASA NTRS1977

Experimental investigation of subsonic turbulent separated boundary layers on an airfoil

Detailed measurements of flow fields associated with low-speed turbulent boundary layers have been made for the 17% thick GA(W)-1 airfoil section at nominal angles of attack of 10, 14, and 18 deg; Reynolds number 2.2 million; and Mach number 0.13. The data include extensive pressure and velocity surveys of the pre- and post-separated regions on the airfoil and the associated wake. Integrated boundary-layer characteristics, including regions of separation on the airfoil, are also presented. The results indicate steep gradients of displacement thickness, momentum thickness, shape factor, and the separation streamline from the point of separation to the trailing edge of the airfoil. The present tests reveal that the region of flow reversal terminates within a suprisingly short distance of less than 20% chord downstream from the trailing edge for the test range of angle of attack.

Seetharam, H. C.↗
NASA NTRS1977

Measurement of post-separated flowfields on airfoils

A small combination pitch-yaw probe designed to facilitate measurement of post-separated flow fields on airfoils is described, along with its calibration. A five-tube probe is found 'ideally suited' to separated-flow measurements because of the pitch and yaw angle information provided in addition to static and total pressures. Wall proximity effects (in a low-speed tunnel) are described. Procedures for measurements in flows with small inclinations in pitch and yaw, for large flow angles, and for scanning flows with large inclinations are indicated.

Seetharam, H. C.↗
NASA NTRS1975

Experimental studies of flow separation and stalling on two-dimensional airfoils at low speeds. Phase 2: Studies with Fowler flap extended

Results were given on experimental studies of flow separation and stalling on a two-dimensional GA(W)-1 17 percent thick airfoil with an extended Fowler flap. Experimental velocity profiles obtained from a five tube probe survey with optimum flap gap and overlap setting (flap at 40 deg) are shown at various stations above, below, and behind the airfoil/flap combination for various angles of attack. The typical zones of steady flow, intermittent turbulence, and large scale turbulence were obtained from a hot wire anemometer survey and are depicted graphically for an angle of attack of 12.5 deg. Local skin friction distributions were obtained and are given for various angles of attack. Computer plots of the boundary layer profiles are shown for the case of the flap at 40 deg. Static pressure contours are also given. A GA(W)-2 section model was fabricated with 30 percent Fowler flaps and with pressure tabs.

Seetharam, H. C.↗
NASA NTRS1975

Measurement of post-separated flow fields on airfoils

Detailed experimental measurements have been made of separated flow fields on a two-dimensional airfoil at low speeds. A rather small pitch yaw pressure probe was chosen. This probe has the capability of remote traversing in the vertical axis and remote yawing of plus or minus 180 deg. The calibration of the probe indicates a useful pitch angle range of about plus or minus 45 deg. The probe and its calibrations provide static and total pressure information as well as three components of velocity. Description and calibration of the probe and typical velocity and pressure plots of the separated flow fields are included.

Seetharam, H. C.↗
NASA NTRS1975

Experimental studies of flow separation and stalling on a two-dimensional airfoil at low speeds

Detailed measurements of flow fields associated with low-speed turbulent boundary layers were made for the 17% thick GA(W)-1 airfoil section at nominal angles of attack of 10 deg, 14 deg, and 18 deg, Reynolds number 2.2 x 10, and Mach number 0.13. The data include pressure and velocity surveys of the pre- and post-separated regions on the airfoil and the associated wake. The boundary layer characteristics including regions of separation on the airfoil are also presented.

Seetharam, H. C.↗
NASA NTRS1975

Wind tunnel and flight development of spoilers for general aviation aircraft

Wind tunnel tests have been carried out to develop a spoiler lateral control system for use with the GA(W)-1 airfoil with a 30% Fowler flap. Tests show that unfavorable aerodynamic interactions can occur between spoiler and flap for large flap deflections. Providing venting of lower surface air through the spoiler opening substantially improves performance. Results of tests with a number of spoiler and cavity shapes are presented and discussed. Applications of two-dimensional wind tunnel results to the design of satisfactory manual lateral control systems are discussed.

Wentz, W. H., Jr.↗
NASA NTRS1974

Development of a Fowler flap system for a high performance general aviation airfoil

A two-dimensional wind-tunnel evaluation of two Fowler flap configurations on the new GA(W)-1 airfoil was conducted. One configuration used a computer-designed 29-percent chord Fowler flap. The second configuration was modified to have increased Fowler action with a 30-percent chord flap. Force, pressure, and flow-visualization data were obtained at Reynolds numbers of 2.2 million to 2.9 million. Optimum slot geometry and performance were found to be close to computer predictions. A C sub L max of 3.8 was achieved. Optimum flap deflection, slot gap, and flap overlap are presented as functions of C sub L. Tests were made with the lower surface cusp filled in to show the performance penalties that result. Some data on the effects of adding vortex generators and hinged-plate spoilers were obtained.

Wentz, W. H., Jr.↗