Search NASA⌕ Search

Engineering topics

Seiner, J. M.

Publications and source records attributed to Seiner, J. M..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Evaluation of Turbulence-Model Performance in Jet Flows

The importance of reducing jet noise in both commercial and military aircraft applications has made jet acoustics a significant area of research. A technique for jet noise prediction commonly employed in practice is the MGB approach, based on the Lighthill acoustic analogy. This technique requires as aerodynamic input mean flow quantities and turbulence quantities like the kinetic energy and the dissipation. The purpose of the present paper is to assess existing capabilities for predicting these aerodynamic inputs. Two modern Navier-Stokes flow solvers, coupled with several modern turbulence models, are evaluated by comparison with experiment for their ability to predict mean flow properties in a supersonic jet plume. Potential weaknesses are identified for further investigation. Another comparison with similar intent is discussed by Barber et al. The ultimate goal of this research is to develop a reliable flow solver applicable to the low-noise, propulsion-efficient, nozzle exhaust systems being developed in NASA focused programs. These programs address a broad range of complex nozzle geometries operating in high temperature, compressible, flows. Seiner et al. previously discussed the jet configuration examined here. This convergent-divergent nozzle with an exit diameter of 3.6 inches was designed for an exhaust Mach number of 2.0 and a total temperature of 1680 F. The acoustic and aerodynamic data reported by Seiner et al. covered a range of jet total temperatures from 104 F to 2200 F at the fully-expanded nozzle pressure ratio. The aerodynamic data included centerline mean velocity and total temperature profiles. Computations were performed independently with two computational fluid dynamics (CFD) codes, ISAAC and PAB3D. Turbulence models employed include the k-epsilon model, the Gatski-Speziale algebraic-stress model and the Girimaji model, with and without the Sarkar compressibility correction. Centerline values of mean velocity and mean temperature are compared with experimental data.

Woodruff, S. L.↗
NASA NTRS2000

Implementation of New Turbulence Spectra in the Lighthill Analogy Source Terms

The industry-standard MGB approach to predicting the noise generated by a given aerodynamic flow field requires that the turbulence velocity correlation be specified so that the source terms in the Lighthill acoustic analogy may be computed. The velocity correlation traditionally used in MGB Computations is inconsistent with a number of basic qualitative properties of turbulent flows. In the present investigation the effect on noise prediction of using two alternative velocity correlations is examined.

Woodruff, S. L.↗
NASA NTRS1999

Effect of Swirl on Noise from a High Aspect Ratio Rectangular Nozzle

Based on extensive work performed by Dr. Thomas H. Sobota (Advanced Projects Research Incorporated (APRI)) on swirling flows in circular-to-rectangular transition sections, a model assembly was designed and fabricated in support of a Phase 1 Small Business Innovation Research Contract between the NASA-Langley Research Center and APRI. This assembly was acoustically tested as part of this Phase 1 effort, the goal being to determine whether the controlled introduction of axial vorticity could affect the various noise generation mechanisms present in an underexpanded supersonic rectangular jet.

Ponton, M. K.↗
NASA NTRS1998

Evaluation of Turbulence-Model Performance as Applied to Jet-Noise Prediction

The accurate prediction of jet noise is possible only if the jet flow field can be predicted accurately. Predictions for the mean velocity and turbulence quantities in the jet flowfield are typically the product of a Reynolds-averaged Navier-Stokes solver coupled with a turbulence model. To evaluate the effectiveness of solvers and turbulence models in predicting those quantities most important to jet noise prediction, two CFD codes and several turbulence models were applied to a jet configuration over a range of jet temperatures for which experimental data is available.

Woodruff, S. L.↗
NASA NTRS1996

Numerical Simulation of Mixing Enhancement in a Hot Supersonic Jet

Experimental observations show that the presence of small tabs on the edge of a hot, compressible jet exiting into a slower moving, colder ambient flow can increase the rate of spreading of the jet. This suggests that the rate of mixing of the jet and the ambient fluid is also increased. In order to elucidate the physical mechanism responsible for the increased spreading rate a set of calculations were carried out within the framework of the compressible three dimensional Navier-Stokes equations. A series of grid refinements were made to assess the accuracy of the results. The first simulated the flow without the tabs, obtaining reasonable agreement with experimental measurements of the velocity. We then simulated the flow, without tabs, over a range of values of the convective Mach number in order to determine the dependence of the mixing on this parameter. Simulations with modeled tabs were also carried out. In these calculations the effect of the tabs on the flow was modeled by pairs of counter rotating vortices. The results of these calculations indeed show that the presence of the tabs increase the spreading rate of the jet. The basic physical mechanism responsible for the enhanced spreading rate is discussed and qualitative comparisons with flow visualizations are made.

Grosch, C. E.↗
NASA NTRS1996

On the Two Components of Turbulent Mixing Noise from Supersonic Jets

It is argued that because of the lack of intrinsic length and time scales in the core part of the jet flow, the radiated noise spectrum of a high-speed jet should exhibit similarity. A careful analysis of all the axisymmetric supersonic jet noise spectra in the data-bank of the Jet Noise Laboratory of the NASA Langley Research Center has been carried out. Two similarity spectra, one for the noise from the large turbulence structures/instability waves of the jet flow, the other for the noise from the fine-scale turbulence, are identified. The two similarity spectra appear to be universal spectra for axisymmetric jets. They fit all the measured data including those from subsonic jets. Experimental evidence are presented showing that regardless of whether a jet is supersonic or subsonic the noise characteristics and generation mechanisms are the same. There is large turbulence structures/instability waves noise from subsonic jets. This noise component can be seen prominently inside the cone of silence of the fine-scale turbulence noise near the jet axis. For imperfectly expanded supersonic jets, a shock cell structure is formed inside the jet plume. Measured spectra are provided to demonstrate that the presence of a shock cell structure has little effect on the radiated turbulent mixing noise. The shape of the noise spectrum as well as the noise intensity remain practically the same as those of a fully expanded jet. However, for jets undergoing strong screeching, there is broadband noise amplification for both turbulent mixing noise components. It is discovered through a pilot study of the noise spectrum of rectangular and elliptic supersonic jets that the turbulent mixing noise of these jets is also made up of the same two noise components found in axisymmetric jets. The spectrum of each individual noise component also fits the corresponding similarity spectrum of axisymmetric jets.

Tam, Christopher K. W.↗
NASA NTRS1995

Nozzle Thrust Optimization While Reducing Jet Noise

A Bluebell nozzle design concept is proposed for jet noise reduction with minimal thrust loss or even thrust augmentation. A Bluebell nozzle has a sinusoidal lip line edge (chevrons) and a sinusoidal cross section shape with linear amplitude increasing downstream in the divergent nozzle part (corrugations). The experimental tests of several Bluebell nozzle designs have shown nose reduction relative to a convergent-divergent round nozzle with design exhaust number M(e) = 1.5. The best design provides an acoustic benefit near 4dB with about 1 percent thrust augmentation. For subsonic flow ((M(e)= 0.6)), the tests indicated that the present method for design of Bluebell nozzles gives less acoustic benefit and in most cases jet noise increased. The proposed designs incorporate analytical theory and 2D and 3D numerical simulations. Full Navier-Stokes and Euler solvers were utilized. Boundary layer effects were used. Several different designs were accounted for in the Euler applications.

Seiner, J. M.↗
NASA NTRS1995

Nonlinear Stability of Supersonic Jets

This paper presents stability calculations made for a shock-free supersonic jet using the model based on parabolized stability equations. In this analysis the large-scale structures, which play a dominant role in the mixing as well as the noise radiated, are modeled as instability waves. This model takes into consideration non-parallel flow effects and also nonlinear interaction of the instability waves. The stability calculations have been performed for different frequencies and mode numbers over a range of jet operating temperatures. Comparisons are made, where appropriate, with the solutions to Rayleigh's equation (linear, inviscid analysis with the assumption of parallel flow). The comparison of the solutions obtained using the two approaches show very good agreement.

Bhat, T. R. S.↗
NASA NTRS1994

Impact of dynamic loads on propulsion integration

Aircraft dynamic loads produced by engine exhaust plumes are examined for a class of military fighter and bomber configurations in model and full scale. The configurations examined are associated with the USAF F-15 and B-1B aircraft, and the US F-18 HARV and ASTOVL programs. The experience gained as a result of these studies is used to formulate a level of understanding concerning this phenomena that could be useful at the preliminary stage of propulsion/airframe design.

Seiner, J. M.↗
NASA NTRS1993

The effect of velocity profiles on supersonic jet noise

This paper presents stability calculations made for a shock-free coannular jet, with both the inner and outer flows supersonic, using the instability wave model. The Mach wave emission process is modeled as the noise generated by the large scale turbulent structures or the instability waves in the mixing region. Both the vortex-sheet and the realistic finite thickness shear layer models are considered. The stability calculations have been performed for both inverted and normal velocity profiles. Comparisons are made with the results for an equivalent single jet, based on equal thrust, mass flow rate and exit area to that of the coannular jet. The advantages and disadvantages of these velocity profiles as far as noise radiation is concerned are discussed.

Bhat, T. R. S.↗
NASA NTRS1993

Supersonic gasdispersional jets and jet noise

This paper examines the potential for controlling jet noise radiation using methods developed for modifying jet infra-red thermal radiation. The control of jet noise may be possible by properly adding different solid and liquid particles into the jet flow and by using special nozzle shapes to change the jet exhaust flow structure. The numerical methods used to achieve these objectives are outlined in this paper. A combined Lagrangian-Eulerian approach is used to numerically simulate a Jet flow with particle addition. The unsteady behavior of jet impingement is examined. The techniques for grid and boundary condition definition are discussed as related to the accuracy of the calculations. Preliminary comparisons to experimental data are presented.

Gilinsky, M. M.↗
NASA NTRS1993

Mach wave emission from a high temperature supersonic jet

The paper considers the compressible Rayleigh equation as a model for the Mach wave emission mechanism associated with high temperature supersonic jets. Solutions to the compressible Rayleigh equation reveal the existence of several families of supersonically convecting instability waves. These waves directly radiate noise to the jet far field. The predicted noise characteristics are compared to previously acquired experimental data for an axisymmetric Mach 2 fully pressure balanced jet operating over a range of jet operating total temperatures from ambient to 1370 K. The results of this comparison show that the first order supersonic instability wave and the Kelvin-Helmholtz first, second, and third order modes have directional radiation characteristics that are in agreement with observed data. The assumption of equal initial amplitudes for all of the waves leads to the conclusion that the flapping mode of instability dominates the noise radiation process of supersonic jets. At a jet temperature of 1370 K, supersonic instability waves are predicted to dominate the noise radiated at high frequency at narrow angles to the jet axis.

Seiner, J. M.↗
NASA NTRS1992

The effects of nozzle exit lip thickness on plume resonance

The acoustic emission and initial shear layer of a cold jet issuing from an underexpanded sonic nozzle were measured where the lip thickness of the nozzle exit varied from 0.015 to 0.625 nozzle diameters. Because the amplitude of plume resonance (or screech) has been shown to be very sensitive to the initial conditions of the plume, the effects of nozzle lip thickness on this sound component in particular was investigated (although it will be shown that other noise components are also affected). Nearfield acoustic measurements have revealed the amplitude and frequency of certain modes of screech to be dependent on nozzle lip thickness. Fluctuating pressure measurements made on the nozzle exit surface have acoustic amplitudes in excess of near field microphone measurements. The dominant mode of instability that exists in the shear layer is also related to this geometric parameter. Detailed shear layer measurements were performed in an attempt to quantify any associated changes in the momentum thickness caused by altering the nozzle exit.

Ponton, M. K.↗
NASA NTRS1991

Relationship between the instability waves and noise of high-speed jets

The relationship between the instability waves and noise of hot jets at moderate supersonic Mach number is investigated. The relative importance of the Kelvin-Helmholtz instability waves and the supersonic instability waves as sources of noise is considered. The results show that, for the range of Mach number and jet-to-ambient temperature ratio considered, the Kelvin-Helmholtz instability waves have much higher total amplification and higher phase speed.

Tam, Christopher K. W.↗
NASA NTRS1990

Supersonic jet noise - Its generation, prediction and effects on people and structures

This paper presents the results of a study aimed at quantifying the effects of jet source noise reduction, increases in aircraft lift, and reduced aircraft thrust on the take-off noise associated with supersonic civil transports. Supersonic jet noise sources are first described, and their frequency and directivity dependence are defined. The study utilizes NASA's Aircraft Noise Prediction Program in a parametric study to weigh the relative benefits of several approaches to low noise. The baseline aircraft concept used in these predictions is the AST-205-1 powered by GE21/J11-B14A scaled engines. Noise assessment is presented in terms of effective perceived noise levels at the FAA's centerline and sideline measuring locations for current subsonic aircraft, and in terms of audiologically perceived sound of people and other indirect effects. The results show that significant noise benefit can be achieved through proper understanding and utilization of all available approaches.

Preisser, J. S.↗
NASA NTRS1990

Viscous effects on the instability of an axisymmetric jet

The stability characteristics of a laminar, axisymmetric jet, issuing from fully developed Poiseuille flow, are investigated. The jet preferred frequency, as inferred from surveys of u'-spectra, is found to yield a Strouhal number (St) that depends on the Reynolds number (R); St and R are based on the jet diameter (D) and the average velocity (U sub av) at the jet origin. The value of St increases with increasing R in the range 400 less than approximately R less than approximately 4000, attaining an asymptotic value of about 0.45. Flow visualization confirms that the instability is primarily in a helical mode, as predicted by stability analyses. Analyses do predict a similar St versus R variation in approximately the correct St-range. However, the R-range where this is predicted is lower than that found experimentally.

Zaman, K. B. M. Q.↗
NASA NTRS1987

Analysis of twin supersonic plume resonance

Recent experiments conducted at NASA Langley show that twin supersonic jets separating by a distance of approximately two nozzle diameters (center to center) exhibit resonant oscillations under a wide range of operating conditions. In this paper the mechanism responsible for the synchronized resonant oscillations is investigated. A vortex sheet jet model is used in the analysis. The model shows that kinematically two modes of twin jet resonance can occur. One mode involves flapping motion of both jets symmetric with respect to the mid-plane separating the two jets. The other mode involves antisymmetric flapping motion. The symmetric mode is consistent with experimental observations. The vortex sheet jet model is, however, unable to provide quantitative estimates of the shift in screech frequency (as compared to a single jet) due to the resonance phenomenon. The reason for this is discussed. Possible improvement of the model and directions for future work are indicated.

Tam, Christopher K. W.↗