Search NASA⌕ Search

Engineering topics

Seitz, Gerald

Publications and source records attributed to Seitz, Gerald.

Low noise, high bandwidth, high sensitivity laser seismometer

A laser seismometer may measure the change in a phase modulated optical signal. Unlike traditional interferometers, the laser phase is first modulated by a radio frequency (RF) source, which is then demodulated following detection to provide the signal of interest. The net result is a direct measurement of displacement with the effects of amplitude noise eliminated via limiting and the effects of 1/f phase noise (frequency drift, etc.) eliminated by self-interfering the signal. Because the signal-to-noise ratio (SNR) of the optical signal is strong, the technique provides a strong measure of the displacement and avoids the extremely low voltages and associated problems of traditional sensors.

58 GEOSCIENCES↗

Beam dynamics in a long-pulse linear induction accelerator

The second axis of the Dual Axis Radiography of Hydrodynamic Testing (DARHT) facility produces up to four radiographs within an interval of 1.6 microseconds. It accomplishes this by slicing four micro-pulses out of a long 1.8-kA, 16.5-MeV electron beam pulse and focusing them onto a bremsstrahlung converter target. The long beam pulse is created by a dispenser cathode diode and accelerated by the unique DARHT Axis-II linear induction accelerator (LIA). Beam motion in the accelerator would be a problem for radiography. High frequency motion, such as from beam breakup instability, would blur the individual spots. Low frequency motion, such as produced by pulsed power variation, would produce spot to spot differences. In this article, we describe these sources of beam motion, and the measures we have taken to minimize it.

43 PARTICLE ACCELERATORS↗

Electron beam dynamics in the long-pulse, high-current DARHT-II linear induction accelerator

The DARHT-II linear induction accelerator (LIA) now accelerates 2-kA electron beams to more than 17 MeV. This LIA is unique in that the accelerated current pulse width is greater than 2 microseconds. This pulse has a flat-top region where the final electron kinetic energy varies by less than 1% for more than 1.5 microseconds. The long risetime of the 6-cell injector current pulse is 0.5 {micro}s, which can be scraped off in a beam-head cleanup zone before entering the 68-cell main accelerator. We discuss our experience with tuning this novel accelerator; and present data for the resulting beam transport and dynamics. We also present beam stability data, and relate these to previous stability experiments at lower current and energy.

43 PARTICLE ACCELERATORS↗