Search NASA⌕ Search

Engineering topics

Sellmyer, David J.

Publications and source records attributed to Sellmyer, David J..

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Accelerating the discovery of novel magnetic materials using machine learning–guided adaptive feedback

Magnetic materials are essential for energy generation and information devices, and they play an important role in advanced technologies and green energy economies. Currently, the most widely used magnets contain rare earth (RE) elements. An outstanding challenge of notable scientific interest is the discovery and synthesis of novel magnetic materials without RE elements that meet the performance and cost goals for advanced electromagnetic devices. Here, we report our discovery and synthesis of an RE-free magnetic compound, Fe 3 CoB 2 , through an efficient feedback framework by integrating machine learning (ML), an adaptive genetic algorithm, first-principles calculations, and experimental synthesis. Magnetic measurements show that Fe 3 CoB 2 exhibits a high magnetic anisotropy ( K 1 = 1.2 MJ/m 3 ) and saturation magnetic polarization ( J s = 1.39 T), which is suitable for RE-free permanent-magnet applications. Our ML-guided approach presents a promising paradigm for efficient materials design and discovery and can also be applied to the search for other functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Magnetic moments and spin structure in single-phase B20 Co 1+x Si 1-x (x = 0.043)

Neutron powder diffraction (NPD) and x-ray magnetic circular dichroism (XMCD) spectroscopy are employed to investigate the magnetism and spin structure in single-phase B20 Co 1.043 Si 0.957 . The magnetic contributions to the NPD data measured in zero fields are consistent with the helical order among the allowed spin structures derived from group theory. The magnitude of the magnetic moment is (0.3 ± 0.1) μ B /Co according to NPD, while the surface magnetization probed by XMCD at 3 kOe is (0.18–0.31) μ B /Co. Both values are substantially larger than the bulk magnetization of 0.11 μ B /Co determined from magnetometry at 70 kOe and 2 K. Finally, these experimental data indicate the formation of a helical spin phase and the associated conical states in high magnetic fields.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modifying magnetic properties of MnBi with carbon: an experimental and theoretical study

MnBi and MnBi-based materials have been investigated as prospective rare-earth-free permanent magnets with moderate energy product. One of the main issues with MnBi synthesis is the presence of residual Bi in the sample which reduces the net magnetization. Here, we have found that MnBi synthesized in the presence of carbon substantially reduces the amount of residual Bi, improving its saturation magnetization. We have synthesized Mn 55 Bi 45 and Mn 55 Bi 45 C x samples using arc melting and high-vacuum annealing. The room temperature x-ray diffraction patterns indicate that both Mn 55 Bi 45 and Mn 55 Bi 45 C x crystallize in the hexagonal NiAs-type structure. The Rietveld analysis of the x-ray patterns shows that the amount of residual Bi reduces from 16 wt.% for Mn 55 Bi 45 to 5 wt.% for Mn 55 Bi 45 C x . The high-field (3 T) magnetizations measured at room temperature are 61 emu g –1 and 66 emu g –1 for Mn 55 Bi 45 and Mn 55 Bi 45 C x , respectively. To understand the role of C in enhancing the magnetization of MnBi, we carried out the first-principles calculations of both stoichiometric and nonstoichiometric MnBi alloys, which suggests that the increase of magnetization in Mn 55 Bi 45 C x may be due to the coating of MnBi grains with C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Magnetism and structure of Fe- and Co-substituted Mn 2 NiSn

Mn-containing Heuslers are important magnetic shape-memory alloys for fast and precise actuators in manufacturing, robotics, surgery, and other applications. Among the key requirements are a high magnetization and favorable thermal properties, especially a high Curie temperature. In this work, the effect of Fe and Co substitution on the structure and magnetism of Mn 2 NiSn alloys is investigated. The Heusler alloys have been produced by melt spinning and characterized by X-ray diffraction, magnetometry, and electron-transport measurements. It was found that Co substitution for Mn enhances the Curie temperature of Mn 2 NiSn and both Co and Fe substitution improve its magnetization. Further, these improvements are accompanied by reduced thermal and magnetic hysteresis losses and by interesting structural changes, namely improved chemical order and site occupancies characteristic of quaternary (Y-ordered) Heuslers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetism and topological Hall effect in antiferromagnetic Ru 2 MnSn-based Heusler compounds

Heusler compounds and alloys based on them are of great recent interest because they exhibit a wide variety of spin structures, magnetic properties, and electron-transport phenomena. Their properties are tunable by alloying and we have investigated L2 1 -orderd compound Ru 2 MnSn and its alloys by varying the atomic Mn:Sn composition. While antiferromagnetic ordering with a Néel temperature of 361 K was observed in Ru 2 MnSn, the Mn-poor Ru 2 Mn 0.8 Sn 1.2 alloy exhibits properties of a diluted antiferromagnet in which there are localized regions of uncompensated Mn spins. Furthermore, a noncoplanar spin structure, evident from a topological Hall-effect contribution to the room-temperature Hall resistivity, is realized in Ru 2 Mn 0.8 Sn 1.2 . Finally, our combined experimental and theoretical analysis shows that in the Ru 2 Mn 0.8 Sn 1.2 alloy, the magnetic properties can be explained in terms of a noncoplanar antiferromagnetic scissor mode, which creates a small net magnetization in a magnetic field and subsequently yields a Berry curvature with a strong topological Hall effect.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Large magnetocaloric effect in rapidly quenched Mn 50- x Co x Ni 40 In 10 nanomaterials

The effect of Co addition on magnetic hysteresis, martensitic transformation temperature, and magnetic entropy change of rapidly-quenched Mn 50- x Co x Ni 40 In 10 alloy nanomaterials has been investigated. The melt-spun Mn 50 Ni 40 In 10 sample exhibits a small magnetic hysteresis which is further reduced by Co doping as measured between 0 and 2 T. The martensitic transformation temperature increases linearly with the electron concentration in the alloy from 195 K for Mn 50 Ni 40 In 10 to 378 K for Mn 45 Co 5 Ni 40 In 10 . The Mn 47 Co 3 Ni 40 In 10 alloy, which has phase-transition temperature close to room temperature, exhibits a substantial peak entropy change of 29.7 J kg -1 K -1 at magnetic field change of 2 T. Our results demonstrate that Mn 47 Co 3 Ni 40 In 10 nanomaterial exhibits promising magnetocaloric properties for near-room-temperature magnetic refrigeration.

Physics↗
DOE OSTI2021

Magnetic and electron transport properties of Co 2 Si nanomagnets

In this study, magnetotransport and ferromagnetism in thin films of Co 2 Si nanoclusters are investigated experimentally and theoretically. The nanoclusters are fabricated by an inert-gas condensation-type cluster-deposition method and have an average size of 11.3 nm. Unlike the bulk Co 2 Si that exhibits a very weak net magnetic moment only below 10 K, the nanoclusters exhibit room-temperature ferromagnetism with a substantial saturation magnetization. Key features of the system are its closeness to the Stoner transition, magnetic moments induced by spin polarization starting from surface atoms, and nonuniaxial anisotropy associated with the orthorhombic crystal structure of Co 2 Si . A method is introduced to determine the effective anisotropy using the experimental magnetization data of this complex system and its relationship with the two lowest-order nonuniaxial anisotropy constants. On decreasing temperature from 300 K, the nanoclusters show electron-transport properties unusual for a ferromagnetic metal, including an increase of Hall resistivity and a nonmonotonic change of negative magnetoresistance with a peak at around 100 K. The underlying physics is explained on the basis of the large polarization of surface spins and variation in the degree of their misalignments due to temperature-dependent effective anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic and structural properties of Mn X NiSn ( X = Mn, Fe, Co)

Crystal structure and magnetic properties of Heusler alloys MnXNiSn (X = Mn, Fe, Co) are investigated using density functional theory and compared with experimental results. The parent alloy Mn 2 NiSn, which crystallizes in the inverse Heusler structure, is found to be ferrimagnetic, in agreement with previous experimental and theoretical work. The Fe and Co substitutions cause the alloys to assume a fairly well-ordered Y structure and enhance the magnetization substantially. We find that the strong nearest neighbour Mn-X exchange changes from antiferromagnetic (X = Mn) to ferromagnetic (X = Fe, Co), which explains and actually overestimates the experimental changes. A striking feature of the system is that Fe and Co have opposite effects on the Curie temperature T c : they reduce and enhance T c , respectively. We qualitatively explain this behaviour in terms of two-sublattice model based on the nearest-neighbour exchange.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural, magnetic, and magnetocaloric properties of (Nd 0.7 Ce 0.3 )YFe 17

Structural, magnetic, and magnetocaloric properties of iron-deficient (Nd 1-x Ce x )YFe 17 alloys in the rhombohedral Th 2 Zn 17 –type crystal structure prepared by arc-melting and vacuum annealing have been investigated. Among the investigated alloys, (Nd 0.7 Ce 0.3 )YFe 17 shows the highest values of magnetic entropy change and relative cooling power, namely 5.45 J kg -1 K -1 and 504 J kg -1 for a magnetic field change of 5 T. The Curie temperature and saturation magnetization of the (Nd 0.7 Ce 0.3 )YFe 17 alloy are 301 K and 162 emu/g, respectively. The absence of thermal and magnetic hysteresis with relatively high cooling capacity near room temperature suggests that Fe-deficient (Nd 0.7 Ce 0.3 )YFe 17 carries significant potential for room-temperature magnetic refrigeration.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Chiral Magnetism and High-Temperature Skyrmions in B20-Ordered Co-Si

Magnets with chiral crystal structures and helical spin structures have recently attracted much attention as potential spin-electronics materials, but their relatively low magnetic-ordering temperatures are a disadvantage. While cobalt has long been recognized as an element that promotes high-temperature magnetic ordering, most Co-rich alloys are achiral and exhibit collinear rather than helimagnetic order. Crystallographically, the B20-ordered compound CoSi is an exception due to its chiral structure, but it does not exhibit any kind of magnetic order. Here, we use nonequilibrium processing to produce B20-ordered Co 1+ x Si 1₋ x with a maximum Co solubility of x = 0.043. Above a critical excess-Co content x c = 0.028 ), the alloys are magnetically ordered, and for x = 0.043, a critical temperature $T_c$ = 328 K is obtained, the highest among all B20-type magnets. The crystal structure of the alloy supports spin spirals caused by Dzyaloshinskii-Moriya interactions, and from magnetic measurements we estimate that the spirals have a periodicity of about 17 nm. In this work, our density-functional calculations explain the combination of high magnetic-ordering temperature and short periodicity in terms of a quantum phase transition where excess-cobalt spins are coupled through the host matrix.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1987

Temperature dependence (4K to 300K) of the electrical resistivity of methane grown carbon fibers

Experimental measurements of the electrical resistivity vs temperature of methane vapor grown carbon fibers are presented. The fibers are heat treated from 1100 C (as-grown) to 3000 C. Data are fit to a standard two band model, which yields values for boundary scattering limited electron mobility, in-plane mean free path, energy band overlap, and total carrier density. The data are also fit to an ellipsoidal band model, where data fits yield effective masses, band overlap, Fermi velocity, phonon contributions to scattering, and ionized impurity scattering rates.

Woollam, John A.↗