Search NASA⌕ Search

Engineering topics

Senanayake, Sanjaya D.

Publications and source records attributed to Senanayake, Sanjaya D..

8 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The Triple Component Interface of Ni–Co–Ce: Growth, Chemical State, and Stability of NiCo Bimetallic Particles on Reducible CeO 2 (111) Thin Films

The growth of NiCo particles at low coverages over reducible CeO 2 (111) thin films producing a triple interface between Ni-Co-Ce was investigated by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS), which was compared to that of monometallic Ni and Co particles. XPS data show that deposition of either Ni or Co on CeO 2 at 300 K causes a partial reduction of Ce 4+ cations to Ce 3+ ions. At 0.3 monolayer (ML), XPS detects Co 2+ on CeO 2 . However, both Ni 0 and Ni 2+ are present as major species at 300 K and annealing causes a significant increase of Ni 2+ in Ni particles. Deposition of 0.3 ML Co over 0.3 ML Ni on CeO 2 at 300 K induces reduction of Ni 2+ to metallic Ni and Ni 0 was found as predominant species. Unlike for Co/CeO 2 , metallic Co was also present over the Co-Ni/CeO 2 surface in addition to Co 2+ . Further, this behavior indicates the formation of NiCo bimetallic particles with the possibility of Co diffusion to the interface of Ni/ceria. With heating, the intermixing of Ni and Co atoms in bimetallic particles on CeO 2 was facilitated. Furthermore, oxidation of both metals and ceria occurred as a result of the diffusion of lattice oxygen from the bulk of ceria to the surface. A slight increase in Ni 2+ was observed after heating Co-Ni/CeO 2 to 500 K or higher. Co became Co 2+ with heating to 800 K. Our STM results confirm the formation of NiCo bimetallic particles on CeO 2 at 300 K and further suggest that the addition of Co can help inhibit the sintering of Ni particles at higher temperatures. Bimetallic particles were also obtained by depositing Ni over existing Co particles on CeO 2 . However, our XPS data demonstrate that the deposition order of Co and Ni plays a role in the chemical state of these two metals in bimetallic particles, likely attributed to the difference in their compositions at the bimetallic particle surface as well as the metal-support interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding the morphology and chemical activity of model ZrO x /Au (111) catalysts for CO 2 hydrogenation

In this study, the growth of ZrO x on Au (111) was investigated using scanning tunneling microscopy (STM) and synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS). Nanostructures of ZrO x (x= 1,2) at the sub-monolayer (≤ 0.3 ML) level were prepared by vapor depositing Zr metal onto Au (111) followed by oxidation with O 2 or CO 2 . At low coverages of the admetal (< 0.05 ML), the formed ZrO x nanostructures were dispersed randomly on the terraces and steps of the Au(111) substrate. Strong oxide-metal interactions prevented the formation of islands of zirconia. The ZrO x nanostructures displayed a reactivity towards CO 2 and H 2 not seen for bulk zirconia. C 1 s AP-XPS results indicated that CO 2 molecules adsorbed on Zr/ZrO x /Au(111) surfaces could undergo partial decomposition on Zr (CO 2 , gas → CO gas + O ads ), or react with oxygen sites from ZrO x to yield carbonates (Zr-CO 3, ads ). Further, after exposing ZrO 2 /Au (111) surfaces to 1:3 mixtures of CO 2 :H 2 , the formation of HCOO, CO 3 , and CH 3 O was detected in AP-XP spectra. These chemical species decomposed at temperatures in the range of 400-600 K, making them possible reaction intermediates for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

CO 2 hydrogenation over rhodium cluster catalyst nucleated within a manganese oxide framework

Rhodium-based manganese oxide frameworks were explored as a prototype for carbon dioxide reactive capture and conversion. Three-dimensional frameworks of MnOx were utilized as support structures to isolate Rh metal centers. V, Na, and Zn were introduced as counterions to stabilize the structure and for their beneficial effect as promoters. Here, with this multicomponent catalyst, Rh active centers with MnOxs and varied counterions, we were able to selectively tune the catalytic performance of the material via the choice of counterion and structure of the host material. With cryptomelane-type tunnel manganese oxides octahedral molecular sieve (OMS2), we found that Rh-V-OMS2 was highly stable even after 48 hours on stream with a reaction rate of around 1.5x10 -4 mol CO 2 /g Rh /s, surpassing the net reactivity of other initially more active combinations. Furthermore, during CO 2 hydrogenation, in situ XAFS showed that single Rh atoms nucleated into nanoparticles/ sub-nanometer clusters with a coordination number of 5.5 or less. Our finding of the correlation between the reaction rate and particle size offers the potential for enhanced control over the reaction rate by tuning particle size. Our activity study with control experiments demonstrates that the activities of the catalysts are proved due to the unique metal support interaction offered by the Rh-X-MnO.

10 SYNTHETIC FUELS↗
DOE OSTI2024

The Surface Chemistry of Methanol on Pd(111) and H–Pd(111) Surfaces: C–O Bond Cleavage and the Effects of Metal Hydride Formation

Palladium catalysts are frequently employed in processes where methanol is an energy vector or carrier, being useful for the synthesis of methanol from mixtures of carbon dioxide and hydrogen (CO 2 /H 2 ) or its steam reforming on demand. Results of synchrotron-based ambient pressure X-ray photoelectron spectroscopy for the adsorption of methanol on a Pd(111) model catalyst show a rich surface chemistry and complex phenomena that strongly depend on pressure and temperature. At low pressures (< 10 -6 Torr) and temperatures (< 300 K), CO is the dominant decomposition product. Further, as the pressure increases, cleavage of C-H, O-H and C-O bonds is observed, and at elevated temperatures (400-600 K) the formation of CO and CH x /C fragments compete on the surface. Thus, existing reaction networks for methanol decomposition must be modified. Furthermore, surface and subsurface hydrogen (coming from PdH x ) play a significant role in the stability and removal of CH x and C species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Directing CO 2 electroreduction pathways for selective C 2 product formation using single-site doped copper catalysts

Manipulating the selectivity-determining step in post-C–C coupling is crucial for enhancing C 2 product specificity during electrocatalytic CO 2 reduction, complementing efforts to boost rate-determining step kinetics. Here we highlight the role of single-site noble metal dopants on Cu surfaces in influencing C–O bond dissociation in an oxygen-bound selectivity-determining intermediate, steering post-C–C coupling toward ethylene versus ethanol. Integrating theoretical and experimental analyses, we demonstrate that the oxygen binding strength of the Cu surface controls the favorability of C–O bond scission, thus tuning the selectivity ratio of ethylene-to-ethanol. The Rh-doped Cu catalyst with optimal oxygen binding energy achieves a Faradaic efficiency toward ethylene of 61.2% and an ethylene-to-ethanol Faradaic efficiency ratio of 4.51 at –0.66 V versus RHE (reversible hydrogen electrode). Integrating control of both rate-determining and selectivity-determining steps further raises ethylene Faradaic efficiency to 68.8% at 1.47 A cm -2 in a tandem electrode. Our insights guide the rational design of Cu-based catalysts for selective CO 2 electroreduction to a single C 2 product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

LaCeO x coupled N-doped graphene/Ru single-atoms as a binary-site catalyst for efficient hydrogen evolution based on hydrogen spillover

Based on the hydrogen spillover effect, versatile binary-site catalysts are promising for the alkaline hydrogen evolution reaction (HER). In which one site can adsorb and dissociate water, while the neighboring site is favorable for liberating hydrogen. Inspired by these possibilities, oxygen vacancy (O v )-rich LaCeO x coupled N-doped graphene/Ru single-atoms (LaCeO x @NGr/Ru 1 ) was synthesized as an efficient dual-site HER catalyst. It delivered an impressive low overpotential of 22 mV at a current density of 10mAcm –2 and a slight Tafel slope of 40 mV dec –1 in an alkaline medium, outstanding the advanced Ru-based catalysts. Moreover, this promising binary-component catalyst exhibited higher mass activity and longer lasting durability than commercial Pt/C catalyst (20 wt%). Finally, experimental and theoretical investigations provided insights into the HER mechanisms of LaCeO x @NGr/Ru 1 based on three indispensable steps: water adsorption and dissociation on O v -rich LaCeO x , diffusion of generated H* species towards Ce 3+ -N-Ru 1 bridges, and hydrogen evolution on Ru 1 sites.

36 MATERIALS SCIENCE↗