Investigating zirconium alloy corrosion with advanced experimental techniques: A review
Not Available
Engineering topics
Publications and source records attributed to Senor, David.
Not Available
TechConnect World Innovation Conference and Expo presentation
The titanium alloy Ti6Al4V is widely used in accelerator facilities as beam windows, which are exposed to high cycle compressive stress waves from intense pulsed proton beams. Such materials interacting with the beam are subject to various forms of radiation damage, which can adversely affect their endurance limit. However, no fatigue data is currently available for high energy proton irradiated titanium alloy. Due to limitations in proton irradiation facilities, only miniature flat samples can be used for irradiation. To address this issue, we have developed a custom-made bend fatigue tester at Fermilab specifically for testing proton irradiated titanium alloy. In this presentation, we report on the fatigue test results obtained from this custom-fatigue tester using a non-ASTM standard specimen design. We plan to validate these sparse fatigue data with ASTM standard samples using standard fatigue samples. Furthermore, we have modified another commercial bend fatigue tester to accommodate miniature samples, and discuss some inherent deficiencies of the commercial fatigue tester to test miniature samples. To overcome this issue, a new fixture design is presented, which enables satisfactory fatigue testing on miniature samples over long periods. Finally, we present an upgrade to the custom-fatigue tester, featuring this new fixture design.
The titanium alloy Ti6Al4V is widely used in accelerator facilities as beam windows, which are exposed to high cycle compressive stress waves from intense pulsed proton beams. Such materials interacting with the beam are subject to various forms of radiation damage, which can adversely affect their endurance limit. However, no fatigue data is currently available for high energy proton irradiated titanium alloy. Due to limitations in proton irradiation facilities, only miniature flat samples can be used for irradiation. To address this issue, we have developed a custom-made bend fatigue tester at Fermilab specifically for testing proton irradiated titanium alloy. In this presentation, we report on the fatigue test results obtained from this custom-fatigue tester using a non-ASTM standard specimen design. We plan to validate these sparse fatigue data with ASTM standard samples using standard fatigue samples. Furthermore, we have modified another commercial bend fatigue tester to accommodate miniature samples, and discuss some inherent deficiencies of the commercial fatigue tester to test miniature samples. To overcome this issue, a new fixture design is presented, which enables satisfactory fatigue testing on miniature samples over long periods. Finally, we present an upgrade to the custom-fatigue tester, featuring this new fixture design.
Abstract not provided.
We report alpha-zirconium (α-Zr) is a hydrogen atom host material used in nuclear energy and semiconducting applications due to Zr's excellent properties such as corrosion resistance, low thermal neutrons cross-section, and thermodynamically favorable interstitial sequestering of H atoms. Herein we use density functional theory simulations to systematically analyze the initial stages of H insertion in the Zr matrix, and determine optimal hydrogen localization, distribution, and clustering tendencies from a thermodynamics and kinetics perspective. Our results suggest that H occupation of tetrahedral sites is strongly favored, consistent with previous experimental and theoretical studies. Further, a cooperative effect in H localization is shown where H atoms favor clustering. The H pair is found to be the most stable by occupying tetrahedral sites with pairs at second nearest-neighbor positions (TTn2). Among the four H atom clusters, the most favorable configuration has two TTn2 pairs forming "box " or "zig-zag" shaped-cluster with the pairs separated by 3.03 or 3.25 Å, respectively. Nudged elastic band simulations suggest that the formation of TTn2 is facile and is limited by the small diffusion barrier of the monomer of less than 0.1 eV. Further, the formation routes for the 4H atom clusters are also presented. The current study can serve as a foundation to systematically model H atom clustering in metals and alloys.
In tritium-producing burnable absorber rods (TPBAR), γ-LiAlO2 is used in the form of an annular ceramic pellet enriched with the 6Li isotope. When irradiated in a pressurized water reactor (PWR), the <sup>6</sup>Li pellets absorb neutrons and produce tritium (<sup>3</sup>H) through <sup>6</sup>Li + n <sup>3</sup>H + α. The 3H chemically reacts with the metal getter where it is captured and leads to formation of a metal hydride. For TPBARs to enable effective tritium production in PWRs, we investigated the <sup>3</sup>H diffusion pathways in the bulk and surface of γ-LiAlO<sub>2</sub> with different concentrations of lithium defects. The calculated results for bulk and low-index surfaces, thermal conductivity, 3H activation energy barriers, and the 3H diffusion coefficients in γ-LiAlO<sub>2</sub> are in good agreement with the available experimental values. In the bulk, our results show that the smallest activation energy barrier is 0.63 eV for substitutional <sup>3</sup>H diffusion with a diffusion coefficient of 3.25x10<sup>-12</sup> m<sup>2</sup>/s. After <sup>3</sup>H diffused from bulk to the surface, it could form different species (such as <sup>3</sup>H<sub>2</sub>, <sup>3</sup>H<sub>2</sub>O, C<sup>3</sup>H<sub>4</sub>) depending on the surface structure, vacancy types and the impurity carbon. Our results indicate that the <sup>3</sup>H<sub>2</sub> is the main product from γ-LiAlO<sub>2</sub> pellets. As the number of V<sub>Li</sub> vacancies and <sup>3</sup>H atoms increases under irradiation (<sup>3</sup>H-rich condition), <sup>3</sup>H<sub>2</sub>O release could increase from the surface of γ-LiAlO<sub>2</sub> pellets.
The next generation of high power targets will use more complex geometries, novel materials, and new concepts (like flowing granular materials); however, the current numerical approaches will not be sufficient to converge towards a reliable target design that satisfies the physical requirements. We will discuss what can be improved in the next 10 years in target modeling to support high power (MW class) targets.
In nuclear reactors, hydrides can form in fuel cladding due to hydrogen absorption in ZIrcaloy and cause embrittlement. This work presents a microstructure-based finite element model to predict the stress-strain response of Zircaloy containing hydrides. Quantitative microstructural details extracted from scanning electron microscopy (SEM) images were used to generate heterogeneous microstructures including the morphology and spatial distribution of hydrides. The constitutive material model for zircaloy in this study is based on crystal plasticity theory which considers the hexagonal close-packed (HCP) atomic structure of Zircaloy material. The hydrides were modeled as brittle material along with a damage model. Hydride formation inside the zircoloy matrix results in residual stress. This phenomenon is also captured in this model. A parametric study has been conducted to understand the effect of volume fraction, orientation, and lamellae thickness of the hydride phase on the mechanical properties of the overall material.
In many high energy physics neutrino beamlines, targets are made up of isotropic POCO graphite grade for production of neutrinos for high energy particle physics research and are bombarded with highly energetic pulsed proton beam. The pulsed proton beam with a small beam size creates thermal stress waves as well as radiation damage such as displacement damage, void formation, swelling, and gas formation amongst others. As a result, after a few years of operation one of the longest operated targets appears to have undergone bulk swelling and fractured along the beam centerline. A complex interaction of dynamic loading due to beam, material degradation due to irradiation are thought to have caused such a failure. Here, we present a numerical simulation to capture the combined effects of swelling and the dynamic effect of thermal stress waves due to beam heating, to explain the failure of target. An empirical formula has been developed to take into account swelling as a function of temperature and proton fluence and has been implemented in a commercial finite element code. Extensive X-ray diffraction (XRD) were performed on graphite samples from the failed target to understand the lattice parameter changes due to irradiation and build a valid empirical model. Simulation results show that swelling plays a major role in elevating the stress state in the material exceeding the failure strength while the pulsed beam heating also introduces fatigue loading that would explain brittle fracture emanating from inside of the material and propagating outward. Such empirical formulations will help in identifying the threshold values of critical parameters to extend the service life of future multi-megawatt neutrino targets and targets in other accelerator environments.
Presented by NETL at APS March Meeting, 02/20
Presented by NETL at NuMat 2018: The Nuclear Materials Conference, 10/18
Abstract not provided.
Abstract not provided.
Materials designed for nuclear reactors undergo microstructural changes resulting from a combination of several environmental factors, including neutron irradiation damage, gas accumulation and elevated temperatures. Typical ion beam irradiation experiments designed for simulating a neutron irradiation environment involve irradiating the sample with a single ion beam and subsequent characterization of the resulting microstructure, often by transmission electron microscopy (TEM). This method does not allow for examination of microstructural effects due to simultaneous gas accumulation and displacement cascade damage, which occurs in a reactor. Sandia’s in situ ion irradiation TEM (I3TEM) offers the unique ability to observe microstructural changes due to irradiation damage caused by concurrent multi-beam ion irradiation in real time. This allows for time-dependent microstructure analysis. A plethora of additional in situ stages can be coupled with these experiments, e.g., for more accurately simulating defect kinetics at elevated reactor temperatures. This work outlines experiments showing synergistic effects in Au using in situ ion irradiation with various combinations of helium, deuterium and Au ions, as well as some initial work on materials utilized in tritium-producing burnable absorber rods (TPBARs): zirconium alloys and LiAlO2.
Abstract not provided.
Abstract not provided.
The Pacific Northwest National Laboratory (PNNL) is currently developing a novel fuel element concept that offers low fuel temperatures, low stored energy, and long core life. Fuel performance modeling has been conducted based on the PNNL-developed Atoms for Peace Reactor (AFPR-100) as a platform for demonstrating the potential of the fuel element concept. The AFPR-100 is a small, water-cooled reactor concept that is designed to use established technology, be passively safe, and proliferation resistant. This paper will describe the fuel element, show the results of fuel performance calculations for this element, and discuss the results of a fabrication demonstration that has been performed for this concept.