Engineering topics

Seo, Dawa

Publications and source records attributed to Seo, Dawa.

3 records

DOE OSTI2024

DEM simulation of the compression of crushable sand: does the initial particle shape matter?

Advances in DEM modeling, combined with high-resolution X-ray tomography, opened the way for computer models based on virtual replicas of the particles which preserve nearly all facets of their geometry. This leads to simulation advantages, but also high computational costs. Here we tackle a question stemming from this trend: how accurate should particle models be to ensure accuracy? We address this question for the case of the compression of crushable sand. LS-DEM was used to generate three models of Ottawa sand (exact replicas, ellipsoids, and spheres) from digital images of its grains. Compression-induced crushing was simulated for all sets by tracking evolving size and shape distribution. The results confirm that exact replicas provide the closest match of the measurements. However, intermediate degrees of rendering (e.g. ellipsoids preserving volume and aspect ratio of the real grains) led to satisfactory results only marginally different from those of exact replicas. In conclusion, these findings provide an example of the protocols that may be followed to identify the optimal degree of particle approximation which should be regarded as mandatory to achieve a conscious, sustainable use of computational resources.

58 GEOSCIENCES↗

DOE OSTI2024

Mesoscale simulation of granular materials under weak shock compaction–pore size distribution effects

This research established a systematic method to generate various pore-size distributions (PSDs) and studied the effect of PSDs on the shock compaction response of granular materials using two-dimensional mesoscale simulations under identical porosity. Simulations utilized various PSDs for three particle shapes (circle, ellipse, and square). Contacting particle configurations using three PSDs, characterized by spatially uniform distributed pores to heterogeneous distributed pores, and non-contacting particle configurations under a single case of PSD were tested. The PSD of generated particle sets was characterized using coordination number, mean diameter, and bimodality coefficient as statistical metrics. Mesoscale simulations showed that regardless of the conditions of pore distributions, shock compaction of granular materials consistently demonstrates a precursor, shock compaction front, and end. However, the shock compaction velocity of contacting particles was dependent on the PSDs despite the constant initial porosity. The compaction velocity was faster in particle configurations with relatively uniform pore distributions than in heterogeneous pore distributions, which our study demonstrated can be attributed to particle rearrangement during compaction. Circular-shaped particles had high sensitivity in shock compaction response to the various PSDs. Furthermore, a contacting particle configuration tended to propagate the shock compaction wave relatively faster than particles that were in a non-contact configuration. This study established the relative importance of considering PSD as a metric over the coordination number in studies of the shock compaction response of granular materials. Further, insights are provided on the evolving shock substructure to characterize the shock compaction response of granular materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Weak shock compaction on granular salt

This study conducted integrated experiments and computational modeling to investigate the speeds of a developing shock within granular salt and analyzed the effect of various impact velocities up to 245 m/s. Experiments were conducted on table salt utilizing a novel setup with a considerable bore length for the sample, enabling visualization of a moving shock wave. Experimental analysis using particle image velocimetry enabled the characterization of shock velocity and particle velocity histories. Mesoscale simulations further enabled advanced analysis of the shock wave’s substructure. In simulations, the shock front’s precursor was shown to have a heterogeneous nature, which is usually modeled as uniform in continuum analyses. The presence of force chains results in a spread out of the shock precursor over a greater ramp distance. With increasing impact velocity, the shock front thickness reduces, and the precursor of the shock front becomes less heterogeneous. Furthermore, mesoscale modeling suggests the formation of force chains behind the shock front, even under the conditions of weak shock. This study presents novel mesoscale simulation results on salt corroborated with data from experiments, thereby characterizing the compaction front speeds in the weak shock regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗