Search NASA⌕ Search

Engineering topics

Septina, Wilman

Publications and source records attributed to Septina, Wilman.

4 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Photoelectrochemical and Photovoltaic Performance of As-deposited Ink-based CuInS 2 Heterojunction Thin Film

In this report, we demonstrate low-temperature ink-based fabrication of CuInS 2 -based photoelectrodes for hydrogen production capable of producing photocurrent densities as high as 8.8mA.cm -2 . In this process, molecular ink made of metal chlorides and thiourea dissolved in methanol was spin coated onto Mo-coated soda lime glass substrates. Samples were then placed on a hot plate (sample surface temperature: 250°C) to induce CuInS 2 formation and remove the solvent and by-products. No further processing, such as high temperature sulfurization, was performed. Further, the CuInS 2 films were then integrated as photocathode for hydrogen evolution by photoelectrodeposition of Pt nanoparticles. Photocurrent density of 0.4mA.cm -2 at 0V vs. RHE was detected from such electrodes. However, samples coated with CdS/ZnO/ITO overlayers forming heterojunction prior to Pt deposition exhibited significant improvement of the photocurrent density, reaching 8.8mA.cm -2 at 0V vs. RHE, highlighting the improved charge transfer by the p-n junction formed at the CuInS 2 /CdS interface. The charge transfer resistance of the CuInS 2 /CdS/ZnO/ITO-Pt photoelectrode was almost 5 times lower than that of the CuInS 2 -Pt photoelectrode as revealed by electrochemical impedance spectroscopy analysis. In addition, the onset potential was shifted by ca. 0.45V toward the anodic direction, reaching 0.75V vs. RHE. Solar cell made of identical structure (Mo/CuInS 2 /CdS/ZnO/ITO) showed power conversion efficiency of 2.1% with short-circuit photocurrent density and open circuit voltage of 7.4mA.cm -2 and 820mV, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Semi-monolithic Integration of All-Chalcopyrite Multijunction Solar Conversion Devices via Thin-Film Bonding and Exfoliation

Here we report on a semi-monolithic integration method to circumvent processing incompatibility between materials of dissimilar classes and combine them into multijunction devices for photovoltaic and photoelectrochemical applications. Proof-of-concept all-chalcopyrite tandems were obtained by consecutive transfer of fully integrated unpatterned 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 PV stacks from their Mo/soda lime glass substrates onto a new single host substrate. This transfer approach consists of two key steps: (1) bonding of the solar stack (face down) onto a handle (e.g., SnO 2 :F, FTO) using a transparent conductive composite and (2) delamination of the solar stack at the chalcopyrite/Mo interface by employing a wedge-based exfoliation technique. Upon transfer onto FTO, a CuGa 3 Se 5 champion device demonstrated near-coincident photocurrent density-voltage characteristic with a baseline measurement. Then, the exfoliated CuGa 3 Se 5 single-junction stack transferred onto FTO served as the new host onto which a second fully processed CuInGaSe 2 stack was bonded (face down) onto and liberated from its Mo/SLG substrate, leading to a complete transfer of both sub-cells onto one FTO substrate. A champion semi-monolithic tandem device exhibited a power conversion efficiency of 5.04% with an open-circuit voltage, a short-circuit current density, and a fill factor of 1.24 V, 7.19 mA/cm 2 , and 56.7%, respectively. This first-time demonstration of a fully operational semi-monolithic device provides a new avenue to combine thermally, mechanically, and/or chemically incompatible thin-film material classes into tandem photovoltaic and photoelectrochemical devices while maintaining state-of-the-art sub-cell processing.

14 SOLAR ENERGY↗
DOE OSTI2021

In situ Al 2 O 3 incorporation enhances the efficiency of CuIn(S,Se) 2 solar cells prepared from molecular-ink solutions

Here, we report an efficiency enhancement of solution-processed CuIn(S,Se) 2 (CISSe) thin film solar cells via in situ incorporation of Al 2 O 3 . These films were produced using inks containing CuCl, InCl 3 , AlNO 3 (Al/Al + In: 0.1) and thiourea dissolved in methanol. After spin coating of these solutions in air, samples were subjected to a selenization process. Auger electron spectroscopy depth-profiling analysis showed that Al is evenly distributed throughout the bulk of the film. Transmission electron microscopy revealed that AlNO 3 precursor reacted with oxygen to form nanosized amorphous Al 2 O 3 grains located within the bulk and grain boundaries of CISSe, as well as at both the top and bottom interfaces. Power conversion efficiency (PCE) as high as 11.6% (JS C : 35.8 mA cm –2 , V OC : 518 mV, FF: 62.2%, no anti-reflection coating) was achieved with Al–CISSe solar cell devices integrated with CdS (chemical bath deposition, thickness: 80 nm) and ZnO/ITO bilayers (sputtered, thickness: 300 nm). The average PCE (10.1%, $\langle$J SC $\rangle$: 34.5 mA cm –2 , $\langle$V OC $\rangle$: 491 mV, $\langle$FF$\rangle$: 59.8%) was nearly 4% (absolute) higher than that measured on CISSe baseline cells fabricated from solutions without Al ($\langle$PCE$\rangle$ = 6.4%, $\langle$J SC $\rangle$: 32.8 mA cm –2 , $\langle$V OC $\rangle$: 410 mV, $\langle$FF$\rangle$: 47.3%). This in situ Al 2 O 3 incorporation is speculated to play a role in the enhancement of the VOC and FF of the devices through passivation of defects in CISSe reducing interface and bulk recombination, as evidenced by a reduced defect density and an increased activation energy of the dominant recombination mechanism from capacitance and temperature-dependent VOC measurements, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗