Search NASA⌕ Search

Engineering topics

Sercel, Peter C.

Publications and source records attributed to Sercel, Peter C..

18 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Single-photon superradiance in individual caesium lead halide quantum dots

The brightness of an emitter is ultimately described by Fermi’s golden rule, with a radiative rate proportional to its oscillator strength times the local density of photonic states. As the oscillator strength is an intrinsic material property, the quest for ever brighter emission has relied on the local density of photonic states engineering, using dielectric or plasmonic resonators. By contrast, a much less explored avenue is to boost the oscillator strength, and hence the emission rate, using a collective behaviour termed superradiance. Recently, it was proposed that the latter can be realized using the giant oscillator-strength transitions of a weakly confined exciton in a quantum well when its coherent motion extends over many unit cells. Here we demonstrate single-photon superradiance in perovskite quantum dots with a sub-100 picosecond radiative decay time, almost as short as the reported exciton coherence time. The characteristic dependence of radiative rates on the size, composition and temperature of the quantum dot suggests the formation of giant transition dipoles, as confirmed by effective-mass calculations. The results aid in the development of ultrabright, coherent quantum light sources and attest that quantum effects, for example, single-photon emission, persist in nanoparticles ten times larger than the exciton Bohr radius.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Giant Apparent Optical Circular Dichroism in Thin Films of Bismuth-Based Hybrid Organic-Inorganic Metal Halide Semiconductor Through Preferred Orientation

Introducing chirality into organic/inorganic hybrid materials can impart chiroptical properties such as circular dichroism. The ability to tune chiroptical properties in self-assembled materials can have important implications for spintronic and optoelectronic applications. Here, a chiral organic cation, (R/S)-4-methoxy-a-methylbenzylammonium, is incorporated to synthesize the bismuth-based hybrid organic-inorganic metal halide semiconductor, (R/S-MeOMePMA)BiI4. Thin films of this Bi-based compound demonstrate large chiroptical responses, with circular dichroism anisotropy (gCD) values up to ˜0.1, close to the highest value observed in another chiral metal-halide semiconductor, (R-MBA2CuCl4). Detailed investigation reveals that this large gCD in (R/S-MeOMePMA)BiI4 is caused by the apparent CD effect. Careful selection of deposition conditions and the concomitant thin-film orientation enables the control of gCD, with maximum value observed when its thin film has a well-crystallized preferred (001) orientation parallel to the substrate. The results support a growing body of evidence that low symmetry plays an important role in achieving unusually large gCD in these chiral metal-halide materials and provides design rules for achieving large chiroptical response via morphology control.

chiroptic response↗
DOE OSTI2023

Impact of Chiral Symmetry Breaking on Spin-Texture and Lone Pair Expression in Chiral Crystals of Hybrid Antimony and Bismuth Halides

Chiral organic building blocks can be incorporated into hybrid organic-inorganic metal-halide crystalline semiconductors so as to control and impact the interconversion between light, charge, and spin. Here, we report a series of hybrid antimony and bismuth halide materials of the general formula MBA 4 B 2 X 10 (B = Sb 3+ , Bi 3+ ; X = Br - , I - ) and study how chiral symmetry breaking imposed by the templating organic chiral methylbenzylammonium (MBA) cations induces symmetry breaking within the inorganic sublattice and leads to a unique spin-texture. The chiral MBA cations introduce two structural modifications to the metal-halide sublattice that consists of isolated edge-sharing dimers of B 2 X 10 octahedra: (1) the dimers have a chiral spatial arrangement with respect to one another and (2) there is an asymmetric distortion of the two subunits within the individual dimers with a higher distortion caused by strong stereochemical activity of the Sb 5s 2 lone pair electrons. The structural distortions and chiral arrangement result in circular dichroism (CD) at the band edge of the inorganic framework with dissymmetry factors in the range of 10 -4 . Chiral spin-splitting of the inorganic states, caused by breaking of the inversion symmetry and large spin-orbit coupling, is studied via density functional theory (DFT), and a multiband effective mass theory was developed that links the DFT-derived spin-splitting of helical character (i.e., spin expectation value not perpendicular to the crystal momentum) to the observed CD. Furthermore, we also find broad red photoluminescence from the MBA 4 Sb 2 Br 10 compounds, which we attribute to self-trapped excitonic emission driven by the large distortion due to the lone pair expression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dark Exciton in 2D Hybrid Halide Perovskite Films Revealed by Magneto-Photoluminescence at High Magnetic Field

Here, a comprehensive study of the exciton fine structure (EFS) is presented in 2D-phenethylammonium lead iodide films using magnetic field-induced polarization of photoluminescence (PL) in both Faraday and Voigt configurations at fields up to 25 Tesla. Three exciton bands are identified in the PL spectrum associated with bound, dark, and bright excitons, respectively. Under a high magnetic field in Faraday/Voigt configuration, large field-induced circular/linear polarization is observed in the PL band related to the dark exciton, which is magnetically activated. Furthermore, it is found that the dark exciton has an anomalous field-induced circular polarization, which cannot be explained by the classical Boltzmann distribution of spin-polarized species. These findings are well explained by an effective mass model that includes exchange terms unique to the monoclinic symmetry as a perturbation of the EFS in the approximate tetragonal symmetry. It is also confirmed that the field-induced linear polarization is sensitive to the monoclinic exchange term, whereas the field-induced circular polarization is immune to such term.

14 SOLAR ENERGY↗
DOE OSTI2023

Unique signatures of the Rashba effect in the magneto-optical properties of two-dimensional semiconductors

Herein, the authors theoretically demonstrate two simple magneto-optical measurements which can be used to confirm the existence of Rashba terms in two dimensional semiconductors, even in samples of unoptimal quality, where the transition line widths are comparable to or larger than the Landau level splitting. The first is magnetic circular dichroism (MCD), where a giant MCD signal should be observed at the band edge in the presence of Rashba terms. The second is the comparison of the diamagnetic shift measured in absorption with that in photoluminescence which occurs from the dispersion minimum of the Rashba exciton.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Lattice distortion inducing exciton splitting and coherent quantum beating in CsPbI 3 perovskite quantum dots

It is well known that shape or crystal anisotropy in nanocrystal quantum dots, which are tiny semiconductor nanoparticles, results in energy splitting of their optically bright excitons (bound electron-hole pairs), which is known as fine structure splitting (FSS). Studying FSS usually requires single or just a few quantum dots because of its sensitivity to nanocrystal size and shape. In this work, by using ensemble-level femtosecond polarized transient absorption, the authors observed clear bright-exciton FSS in solution-processed CsPbI 3 perovskite QDs, which is manifested as exciton quantum beats (periodic oscillations of kinetic traces). Remarkably, the beat frequency of a given sample, as determined by the FSS energy, can be continuously controlled by changing the temperature. The FSS is linked experimentally for the first time to temperature dependent lattice distortion in the orthorhombic crystal structure. Because these orthorhombic-phase nanocrystal quantum dots are bounded by the pseudocubic family of crystal planes, the lattice distortion results in a misalignment between the lattice vectors and the nanocrystal edge directions which breaks the symmetry, leading to previously unrecognized avoided crossing “fine-structure gap” between bright exciton. Furthermore, this fine structure gap is responsible for the ability to observe quantum beats despite the shape inhomogeneity within the measured ensemble. Lattice-distortion dependent FSS in CsPbI 3 QDs has important consequences for their application as a platform for coherence and entanglement control in quantum information science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Transient quantum beatings of trions in hybrid organic tri-iodine perovskite single crystal

Utilizing the spin degree of freedom of photoexcitations in hybrid organic inorganic perovskites for quantum information science applications has been recently proposed and explored. However, it is still unclear whether the stable photoexcitations in these compounds correspond to excitons, free/trapped electron-hole pairs, or charged exciton complexes such as trions. Here we investigate quantum beating oscillations in the picosecond time-resolved circularly polarized photoinduced reflection of single crystal methyl-ammonium tri-iodine perovskite (MAPbI 3 ) measured at cryogenic temperatures. We observe two quantum beating oscillations (fast and slow) whose frequencies increase linearly with B with slopes that depend on the crystal orientation with respect to the applied magnetic field. We assign the quantum beatings to positive and negative trions whose Landé g-factors are determined by those of the electron and hole, respectively, or by the carriers left behind after trion recombination. These are $g^{e}_{[001]}$ = 2.52 and $g^{e}_{[1\bar10]}$ = 2.63 for electrons, whereas |$g^{h}_{[001]}$| = 0.28 and |$g^{h}_{[1\bar10]}$| = 0.57 for holes. The obtained g-values are in excellent agreement with an 8-band K.P calculation for orthorhombic MAPbI3. Using the technique of resonant spin amplification of the quantum beatings we measure a relatively long spin coherence time of ~ 11 (6) nanoseconds for electrons (holes) at 4 K.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Dark and Bright Excitons in Halide Perovskite Nanoplatelets

Semiconductor nanoplatelets (NPLs), with their large exciton binding energy, narrow photoluminescence (PL), and absence of dielectric screening for photons emitted normal to the NPL surface, could be expected to become the fastest luminophores amongst all colloidal nanostructures. However, super-fast emission is suppressed by a dark (optically passive) exciton ground state, substantially split from a higher-lying bright (optically active) state. Here, the exciton fine structure in 2-8 monolayer (ML) thick Cs n - 1 Pb n Br 3n + 1 NPLs is revealed by merging temperature-resolved PL spectra and time-resolved PL decay with an effective mass model taking quantum confinement and dielectric confinement anisotropy into account. This approach exposes a thickness-dependent bright-dark exciton splitting reaching 32.3 meV for the 2 ML NPLs. The model also reveals a 5-16 meV splitting of the bright exciton states with transition dipoles polarized parallel and perpendicular to the NPL surfaces, the order of which is reversed for the thinnest NPLs, as confirmed by TR-PL measurements. Accordingly, the individual bright states must be taken into account, while the dark exciton state strongly affects the optical properties of the thinnest NPLs even at room temperature. Significantly, the derived model can be generalized for any isotropically or anisotropically confined nanostructure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

On the optical anisotropy in 2D metal-halide perovskites

We develop a better understanding of the many contributing factors that give rise to extreme optical anisotropy in 2D perovskites, and we then show that spin-coated films can exhibit excellent order comparable with exfoliated crystals.

14 SOLAR ENERGY↗
DOE OSTI2021

Rashba exciton in a 2D perovskite quantum dot

The Rashba effect has been proposed to give rise to a bright exciton ground state in halide perovskite nanocrystals (NCs), resulting in very fast radiative recombination at room temperature and extremely fast radiative recombination at low temperature. In this paper we find the dispersion of the “Rashba exciton”, i.e., the exciton whose bulk dispersion reflects large spin–orbit Rashba terms in the conduction and valence bands and thus has minima at non-zero quasi-momenta. Placing Rashba excitonsin quasi-2D cylindrical quantum dots, we calculate size-dependent levels of confined excitons and their oscillator transition strengths. Here, we consider the implications of this model for two-dimensional hybrid organic–inorganic perovskites, discuss generalizations of this model to 3D NCs, and establish criteria under which a bright ground exciton state could be realized.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Embedding PbS Quantum Dots (QDs) in Pb-Halide Perovskite Matrices: QD Surface Chemistry and Antisolvent Effects on QD Dispersion and Confinement Properties

Hybrid materials of metal chalcogenide colloidal quantum dots (QDs) embedded in metal halide perovskites (MHPs) have led to composites with synergistic properties. Here, we investigate how QD size, surface chemistry, and MHP film formation methods affect the resulting optoelectronic properties of QD/MHP “dot-in-matrix” systems. We monitor the QD absorption and photoluminescence throughout synthesis, ligand exchange, and transfer into the MHP ink, and we characterize the final QD/MHP films via electron microscopy and transient absorption. In addition, we are the first to globally map how PbS QDs are distributed on the micrometer scale within these dot-in-matrix systems, using three-dimensional (3D) tomography time-of-flight secondary ion mass spectrometry. The surface chemistry imparted during synthesis directly affects the optical properties of the dot-in-matrix composites. Pb-halide passivation leads to QD/MHP dot-in-matrix samples with optical properties that are well-described by a theoretical model, based on a Type I finite-barrier heterostructure between the PbS QD and the MHP matrix. Samples without Pb-halide passivation show complicated size-dependent behavior, indicating a transition from a Type I heterostructure between the PbS QD wells and MHP barriers for small-sized QDs to PbS QDs that are electronically decoupled from the MHP matrix for larger QDs. Furthermore, the choice in perovskite antisolvent crystallization method leads to a difference in the spatial QD distribution within the perovskite matrix, differences in carrier lifetime, and photoluminescence shifts of up to 180 meV for PbS in methylammonium lead iodide. This work establishes an understanding of such emerging synergistic systems relevant for technologies such as photovoltaics, infrared emitters and detectors, and other unexplored technological applications.

92 SC - Basic Energy Sciences (BES) (SC-22)↗
DOE OSTI2020

Effect of Anisotropic Confinement on Electronic Structure and Dynamics of Band Edge Excitons in Inorganic Perovskite Nanowires

Inorganic lead halide perovskite nanostructures show promise as the active layers in photovoltaics, light emitting diodes, and other optoelectronic devices. They are robust in the presence of oxygen and water, and the electronic structure and dynamics of these nanostructures can be tuned through quantum confinement. Here we create aligned bundles of CsPbBr3 nanowires with widths resulting in quantum confinement of the electronic wave functions and subject them to ultrafast microscopy. We directly image rapid one-dimensional exciton diffusion along the nanowires, and we measure an exciton trap density of roughly one per nanowire. Using transient absorption microscopy, we observe a polarization-dependent splitting of the band edge exciton line, and from the polarized fluorescence of nanowires in solution, we determine that the exciton transition dipole moments are anisotropic in strength. Furthermore, our observations are consistent with a model in which splitting is driven by shape anisotropy in conjunction with long-range exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Quasicubic model for metal halide perovskite nanocrystals

In this work, we present an analysis of quantum confinement of carriers and excitons, and exciton fine structure, in metal halide perovskite (MHP) nanocrystals (NCs). Starting with coupled-band k · P theory, we derive a nonparabolic effective mass model for the exciton energies in MHP NCs valid for the full size range from the strong to the weak confinement limits. We illustrate the application of the model to CsPbBr 3 NCs and compare the theory against published absorption data, finding excellent agreement. We then apply the theory of electron-hole exchange, including both short- and long-range exchange interactions, to develop a model for the exciton fine structure. We develop an analytical quasicubic model for the effect of tetragonal and orthorhombic lattice distortions on the exchange-related exciton fine structure in CsPbBr 3 , as well as some hybrid organic MHPs of recent interest, including formamidinium lead bromide (FAPbBr 3 ) and methylammonium lead iodide (MAPbI3). Testing the predictions of the quasicubic model using hybrid density functional theory (DFT) calculations, we find qualitative agreement in tetragonal MHPs but significant disagreement in the orthorhombic modifications. Moreover, the quasicubic model fails to correctly describe the exciton oscillator strength and with it the long-range exchange corrections in these systems. Introducing the effect of NC shape anisotropy and possible Rashba terms into the model, we illustrate the calculation of the exciton fine structure in CsPbBr 3 NCs based on the results of the DFT calculations and examine the effect of Rashba terms and shape anisotropy on the calculated fine structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗