Search NASA⌕ Search

Engineering topics

Seshadri, Ram

Publications and source records attributed to Seshadri, Ram.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Multiscale approaches for optimizing the impact of strain on Na-ion battery cycle life

Abstract The high costs and geopolitical challenges inherent to the lithium-ion (Li-ion) battery supply chain have driven a rising interest in the development of sodium-ion (Na-ion) batteries as a potential alternative. Unfortunately, the larger ionic radius of Na limits the reversibility of cycling because of the extensive atomic rearrangements that accompany Na-ion insertion, which in turn limit diffusion and charging speed, and lead to rapid degradation of the electrodes. The Center for Strain Optimization for Renewable Energy (STORE) was established to address these challenges and develop new electrode materials for Na-ion cells. This article discusses the current state-of-the-art materials used in Na-ion cells and several directions that STORE believes are critical to understand and control the structural and volumetric changes during the reversible (de)insertion of large cations. Graphical abstract Highlights Understanding the fundamental way materials respond to localized strains at the atomic length-scale is a critical first step in the development of highly reversible, long cycle life, Na-ion insertion hosts. This perspective explores a variety of methods that can be employed to mitigate the detrimental effects of large strain. The insights gained from these investigations should help lay the foundation for the creation of more economical and sustainable batteries that could have immediate impact on global energy infrastructure. Discussion Although there is near universal agreement that electrochemical energy storage must be an integral part of a green-energy future, there is less agreement about how to reduce the cost of energy storage. Replacing high-cost lithium-ion cells with lower-cost sodium-ion batteries is one option frequently considered in future energy models, but the details of what can be achieve with optimized sodium cell performance remains unclear. Here we posit that developing methods to mitigating strain on the electrode particle length scale is a key factor for achieving long-cycle-life sodium-ion batteries. Mitigating strain on the atomic scale suppress electrode-level volume change. Allowing for fast cycling in materials without the problems of electrode cracking or delamination. We further posit that understanding volume change in sodium-ion electrodes at a fundamental level will lead to the designing new sodium-ion electrode materials that will allow for efficient, stable, lower-cost energy storage.

Brady, Michael J.↗
DOE OSTI2024

Iodide Double Perovskites and the Limits of their Structural Stability

AbstractWhile halide double perovskites A2M(I)M(III)X6 have attracted significant attention, examples involving iodides are rare. We examine the limits of the structural stability of iodide double perovskites, presenting the synthesis and single‐crystal structures of Cs2NaScI6 and Cs2NaYI6. Bypassing the common expectation that iodides have small band gaps, these compounds display optical gaps of 3.10 eV [M(III) = Sc] and 3.65 eV [M(III) = Y]. Cs2NaScI6 is the only iodide double perovskite to exhibit a cubic crystal structure at room temperature. Density functional theory‐based electronic structure calculations help understand the role of competing Cs3M(III)2I9 (3 : 2 : 9) phases and provide possible reasons for why iodide double perovskites based around In(III), Sb(III) and Bi(III) cations have proved elusive. We confirm design rules for halide double perovskites based around concepts of the tolerance factor and the radius ratio of the smaller, trivalent ion, but also point to situations such as what is observed for Cs2NaScI6 where a double perovskite can be trapped in a metastable structure.

Mulligan, Anya S.↗
DOE OSTI2024

Molecular Origins of Near-Infrared Luminescence in Molybdenum and Tungsten Oxyhalide Perovskites

Materials with near-infrared (near-IR) luminescence are desirable for applications in communications and sensing, as well as biomedical diagnostics and imaging. The most used inorganic near-IR emitters rely on precise doping of host crystal structures with select rare-earth or transition metal ions. Recently, another class of materials with intrinsic near-IR emission has been reported. The compositions of these materials were initially described as vacancy-ordered halide double perovskites Cs 2 MoCl 6 and Cs 2 WCl 6 , but further investigation by some of us on the compound reported as Cs2WCl6 revealed an oxyhalide instead, with a composition Cs 2 WO x Cl 6–x , where 1 < x < 2. Here we demonstrate that the Mo compounds similarly possess the composition Cs 2 MoO x Cl 6–x or Cs 2 MoO x Br 6–x where 1 < x < 2. Preparing the pure halide appears harder for Mo than for W, and we have not succeeded in doing so. The distinctly different composition requires the coordination environment and oxidation state for the Mo and W centers to be reconsidered from what was assumed for the pure halides. In this work, we examine the mechanism for near-IR emission in these materials given their true structures and compositions. We demonstrate that the luminescence is due to the specific d-orbital splitting caused by the presence of oxygen in the distorted [MOX 5 ] 2– octahedra (X is Cl or Br). The fine structure in the emission spectra at low temperatures has been resolved and is attributed to vibronic coupling to the Mo–O and W–O bond stretches. Understanding the true structure and composition of these interesting materials, besides explaining the near-IR luminescence, suggests how this desirable emission can be realized and manipulated.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Structural Evolution and Photoluminescence Quenching across the FASnI 3– x Br x ( x = 0–3) Perovskites

One of the primary methods for band gap tuning in metal halide perovskites has been halide (I/Br) mixing. Despite widespread usage of this type of chemical substitution in perovskite photovoltaics, there is still little understanding of the structural impacts of halide alloying, with the assumption being the formation of ideal solid solutions. The FASnI 3–x Br x (x = 0–3) family of compounds provides the first example where the assumption breaks down, as the composition space is broken into two unique regimes (x = 0–2.9; x = 2.9–3) based on their average structure with the former having a 3D and the latter having an extended 3D (pseudo 0D) structure. Pair distribution function (PDF) analyses further suggest a dynamic 5s 2 lone pair expression resulting in increasing levels of off-centering of the central Sn as the Br concentration is increased. These antiferroelectric distortions indicate that even the x = 0–2.9 phase space behaves as a nonideal solid-solution on a more local scale. Solid-state NMR confirms the difference in local structure yielding greater insight into the chemical nature and local distributions of the FA + cation. In contrast to the FAPbI 3–x Br x series, a drastic photoluminescence (PL) quenching is observed with x ≥ 1.9 compounds having no observable PL. In conclusion, our detailed studies attribute this quenching to structural transitions induced by the distortions of the [SnBr 6 ] octahedra in response to stereochemically expressed lone pairs of electrons. This is confirmed through density functional theory, having a direct impact on the electronic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Magnetic tunability in tetragonal Mn–Rh–Ir–Sn inverse Heusler compounds

Abstract Gaining control over magnetic structure has been an ongoing challenge in materials that form complex, nanoscale, and non-collinear magnetic configurations. Recently, it was predicted that tuning the ratio of the Dzyaloshinskii–Moriya interaction to the uniaxial magnetic anisotropy in tetragonal inverse Heuslers through changes in composition could allow a range of interesting magnetic states to be accessed, from simple ferrimagnetism, to helical and antiskyrmionic phases. Here, we show tunability of the magnetic phase behavior in the Mn–Rh–Sn system through Ir substitution on the Rh substructure. Iridium substitution correlates to an increase in the strength of ferromagnetic exchange couplings, at the expense of antiferromagnetic exchange couplings. However, we do not observe the complex non-collinear magnetic phases proposed previously, likely due to the extremely narrow composition window where these phases are predicted to form in a bulk sample. This work highlights the sensitivity of complex magnetic structures to stoichiometry, which makes them difficult to discover empirically.

Physics↗
DOE OSTI2024

Soft-Chemical Synthesis, Structure Evolution, and Insulator-to-Metal Transition in Pyrochlore-like λ-RhO 2

λ-RhO 2 , a prototype 4d transition metal oxide, has been prepared by the oxidative delithiation of spinel LiRh 2 O 4 using ceric ammonium nitrate. Average-structure studies of this RhO 2 polytype, including synchrotron powder X-ray diffraction and electron diffraction, indicate the room-temperature structure to be tetragonal, in space group I4 1 /amd, with a first-order structural transition to cubic $Fd\bar{3}m$ at T = 345 K on warming. Synchrotron X-ray pair distribution function analysis and 7 Li solid-state nuclear magnetic resonance measurements suggest that the room-temperature structure displays local Rh-Rh bonding. The formation of these local dimers appears to be associated with a metal-to-insulator transition with a nonmagnetic ground state, as also supported by density functional theory-based electronic structure calculations. In conclusion, this contribution demonstrates the power of soft chemistry to kinetically stabilize a simple binary oxide compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hybrid Iodide Perovskites of Divalent Alkaline Earth and Lanthanide Elements

Hybrid halide perovskites AM II X 3 (A = ammonium cation, M II = divalent cation, X = Cl, Br, I) have been extensively studied but have only previously been reported for the divalent carbon group elements Ge, Sn, and Pb. While they have displayed an impressive range of optoelectronic properties, the instability of Ge II and Sn II and the toxicity of Pb have stimulated significant interest in finding alternatives to these carbon group-based perovskites. Here, we describe the low-temperature solid-state synthesis of five new hybrid iodide perovskites centered around divalent alkaline earth and lanthanide elements, with the general formula AM II I 3 (A = methylammonium, MA; M II = Sr, Sm, Eu, and A = formamidinium, FA; M II = Sr, Eu). Structural, calorimetric, optical, photoluminescence, and magnetic properties of these materials are reported.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Magnetic order in the S eff =1/2 triangular-lattice compound NdCd 3 ⁢P 3

Here, we present and characterize a new member of the R⁢Cd 3 ⁢P 3 (R=rare earth) family of materials, NdCd 3 ⁢P 3 , which possesses Nd 3+ cations arranged on well-separated triangular lattice layers. Magnetic susceptibility and heat capacity measurements demonstrate a likely S eff =1/2 ground state, and also reveal the formation of long-range antiferromagnetic order at T N =0.34K. Via measurements of magnetization, heat capacity, and electrical resistivity, we characterize the electronic properties of NdCd 3 ⁢P 3 and compare results to density functional theory calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hybrid and Inorganic Vacancy-Ordered Double Perovskites A 2 WCl 6

We report hybrid and all-inorganic, vacancy-ordered double perovskites of d 2 W 4+ with the formula A 2 WCl 6 (A = CH 3 NH 3 + , Rb + , and Cs + ). These compounds, which are reddish in color, can be distinguished from structurally similar compounds obtained by hydrothermal methods on the basis of structure, spectroscopic, and magnetic properties. The latter are green and incorporate oxygen, with the actual formula Cs 2 WO x Cl 6–x and distinct optical absorption and emission behavior. Furthermore, the local-moment magnetism of the pure-red d 2 compounds reported here does not correspond to the appropriate Kotani model, suggesting as-yet undiscovered physics in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Incommensurate charge-stripe correlations in the kagome superconductor CsV 3 Sb 5–x Sn x

The class of AV 3 Sb 5 (A=K, Rb, Cs) kagome metals hosts unconventional charge density wave states seemingly intertwined with their low temperature superconducting phases. The nature of the coupling between these two states and the potential presence of nearby, competing charge instabilities however remain open questions. This phenomenology is strikingly highlighted by the formation of two ‘domes’ in the superconducting transition temperature upon hole-doping CsV 3 Sb 5 . Here we track the evolution of charge correlations upon the suppression of long-range charge density wave order in the first dome and into the second of the hole-doped kagome superconductor CsV 3 Sb 5–x Sn x . Initially, hole-doping drives interlayer charge correlations to become short-ranged with their periodicity diminished along the interlayer direction. Beyond the peak of the first superconducting dome, the parent charge density wave state vanishes and incommensurate, quasi-1D charge correlations are stabilized in its place. These competing, unidirectional charge correlations demonstrate an inherent electronic rotational symmetry breaking in CsV 3 Sb 5 , and reveal a complex landscape of charge correlations within its electronic phase diagram. Our data suggest an inherent 2k ƒ charge instability and competing charge orders in the AV 3 Sb 5 class of kagome superconductors.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Electrochemical Control of Magnetism on the Breathing Kagome Network of Li x ScMo 3 O 8

Controlling properties within a given functional inorganic material structure type is often accomplished through tuning the electronic occupation, which is in turn dictated by the elemental composition determined at the time of material preparation. We employ electrochemical control of the lithium content, with associated electronic occupancy control, to vary the magnetic properties of a material where a kagome-derived network of Mo 3 triangles carry the spin. In this case, Li is electrochemically inserted into LiScMo 3 O 8 , a layered compound containing a breathing Mo kagome network. Up to two additional Li can be inserted into LiScMo 3 O 8 , transforming it into Li 3 ScMo 3 O 8 . Li 2 ScMo 3 O 8 prepared by electrochemical lithiation is compared to the quantum spin liquid candidate compound Li 2 ScMo 3 O 8 prepared through high-temperature solid-state methods, which has a slightly different structural stacking sequence but a similar kagome-derived network. Magnetic measurements are supported by first-principles calculations, showing that electrons remain localized on the Mo clusters throughout the doping series. As x is varied in Li x ScMo 3 O 8 , the measurements and calculations reveal the evolution from a diamagnetic band insulator at x = 1 to a geometrically frustrated magnet at x = 2, back to a diamagnetic insulator at x = 3. These results indicate a likelihood of strong coupling between the degree of Li disorder and charge/magnetic ordering over the Mo 3 clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Elusive Double Perovskite Iodides: Structural, Optical, and Magnetic Properties

Halide double perovskites [A 2 M I M III X 6 ] are an important class of materials that have garnered substantial interest as non-toxic alternatives to conventional lead iodide perovskites for optoelectronic applications. While numerous studies have examined chloride and bromide double perovskites, reports of iodide double perovskites are rare, and their definitive structural characterization has not been reported. Predictive models have aided us here in the synthesis and characterization of five iodide double perovskites of general formula Cs 2 NaLnI 6 (Ln=Ce, Nd, Gd, Tb, Dy). Finally, the complete crystal structures, structural phase transitions, optical, photoluminescent, and magnetic properties of these compounds are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗