Search NASA⌕ Search

Engineering topics

Seth Schisler

Publications and source records attributed to Seth Schisler.

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Energy Augmentation for Vehicle Electric Systems (EAVES)

This preliminary study evaluated eight concepts for augmenting the energy state of electric Vertical Take-Off and Landing vehicles. Advanced Air Mobility electric vehicles could need additional charge due to depleted batteries (e.g., strong winds along the way) while approaching their destination. There are five direct charging and three indirect charging concepts presented in this paper. The concepts are in the preliminary research stage and are being refined. Considering the concepts are for the year 2045 timeframe, there is sufficient time to evolve them, along with the designs of these electric air vehicles. This Technical Memorandum describes more detail and provides a discussion on the desirability, viability, feasibility, and wickedness of these energy augmentation concepts. A discussion of barriers and initial investigation approach for the concepts is presented as well. One intent for the presentation of this Technical Memorandum is to capture the work done from March through September 2022 within NASA’s Convergent Aeronautics Solutions (CAS) Project, in the Transformative Aeronautics Concepts Program. At the end of the effort, it was decided that only one concept would be further investigated. The rest of the concepts for energy augmentation would be described in this document and could be picked up later if NASA chose to further investigate them. This document is a collection of input from the authors regarding the concepts they worked on. It is not intended to be a conference or journal publication, but a record of research conducted on the concepts considered by the Energy Augmentation for Vehicle Electric Systems (EAVES) team consisting of the authors. Mr. Todd Stinchfield was the Principal Investigator.

Kapil Sheth↗
NASA NTRS2021

A Dedicated, Long Duration Balloon Mission from Antarctica to Measure the Effects of Low Dose Galactic Cosmic Radiation on Biology

Antarctic long duration balloon missions flown by NASA’s Science Mission Directorate (SMD)can be used as a surrogate for the deep space radiation environment, reducing the need to launch orbital experiments to assess the impact of galactic cosmic radiation (GCR) on biology. To date, over fifty NASA balloon missions flown from Antarctica have carried scientific payloads from Astrophysics (APD) and Heliophysics (HPD)in SMD. Only two life science experiments have been flown from Antarctica, and both were ride-along (piggyback) opportunities, limiting the sophistication and types of model organisms that can be incorporated into studies. Herein, we argue for establishing a large, dedicated Antarctic balloon mission for the Biological and Physical Sciences (BPS) Division in SMD to be launched in 2029/2030, with an “omnibus” gondola carrying dozens of independent Space Biology payloads that would receive a sustained exposure to low dose rate GCRs for 30+ days. Our unprecedented, protracted radiation experiment cannot be done using ground-based simulation facilities or in space; it can only be achieved through an Antarctic balloon mission dedicated to BPS Division payloads. By providing more access to radiation research platforms through existing NASA SMD access to Antarctic balloon flight opportunities, the Space Biology community will be better positioned to address unknowns associated with low dose rate GCR exposures in long duration spaceflight.

David J Smith↗
NASA NTRSDate not supplied

Lunar Marvin Compact CLIPS Innovative Rover

The development of a unique 2 wheel concept that was briefly demonstrated in the Atacama desert (Chile) for a Mars mission concept (hence, MARVIN: MARs Vehicular Innovator).

Marc Murbach↗
NASA NTRSDate not supplied

TechEdSat 7, 10, 13, 15: Exo-brake Experiments on the ISS, First Virgin Orbit, and First Firefly-Alpha Test Flights

The TechEdSat flight series (TES-n), developed by the Nano Orbital Workshop (NOW) group at NASA Ames, has been studying cube satellite re-entry technologies with a focus on Exo-Brake drag device research. An exo-atmospheric braking device, the Exo-Brake uses the tenuous upper atmosphere acting in a free molecular flow regime to enable controllable adjustment of the drag profile of the host spacecraft, currently enabling rapid disposal of small spacecraft after mission conclusion, and eventual targeted de-orbit to a desired entry point at the Von Karman line, or approximately 100km in altitude. The TES-7 mission, flown on the first successful Virgin Orbit flight January 17, 2021, was injected into a 500km, 61-degree inclination orbit, with an expected orbital lifetime of approximately ten years. After successful deployment of a unique hydrogen gas-cell inflation design ‘disposal’-type Mylar Exo-Brake intended to rapidly de-orbit the spacecraft, the maximum expected orbital lifetime of the TES-7 spacecraft was successfully reduced from ten years to 1.3 years, an 87% reduction in orbit lifetime via a passive, fuel-less system. The subsequent TES-13 mission utilized a new, less complex ‘disposal’-type Exo-Brake design made from collapsible rigid struts rather than inflated struts to reduce the engineering, construction, and safety complexities introduced by the prior hydrogen gas inflation design. The rigid strut Exo-Brake design is stowed via rotational compression and deploys using only stored spring energy once released via electronic actuator. This new rotation compression storage design has become the new Exo-Brake design standard used on TES missions thanks to its simplicity. Following on the success of this new Exo-Brake design demonstrated by TES-13, the design was further refined to enabled active manipulation of the Exo-Brake effective drag area though a winch-like system. Both the TES-10 and TES-15 spacecraft were equipped with geometrically similar Exo-Brake devices capable of such active drag modulation, with the intent of studying the operational impact of having such devices on cube satellite missions. To increase the survival time of the Exo-Brake at low altitudes and thus gain more experiment time and better guidance capability, TES-15 was equipped with a modulated Exo-Brake constructed from 3M™ Nextel™ 440 ceramic oxide fiber, the same fabric material used in the Space Shuttle TPS system, rather than Mylar. After launching on Alpha Flight 2 October 1st, 2022, Firefly’s first successful launch, TES-15 met the same modulation restrictions as TES-10, with modulation prohibited above 200km to avoid possible collision with other spacecraft. In this case, a low deployment orbit caused an extremely short mission life, which, coupled with delayed spacecraft identification, exacerbated collision concerns and caused performance data of the high-temperature Exo-Brake design to be inconclusive. As such, the Nano Orbital Workshop has taken a new approach of only conducting modulated Exo-Brake research on missions deploying below ISS altitude to avoid collision avoidance restrictions, and is working to improve spacecraft identification and location reporting techniques to increase experiment durations. Upcoming TES mission will therefore use one of two classes of Exo-Brake depending on their target altitude, as to be described in the submission.

Marcus Murbach↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented in this paper.

eVTOL vehicles↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented here.

eVTOL vehicles↗