Europa Clipper pointing stability: challenges on a multi-instrument mission to Jupiter
This paper will discuss assessment methodologies, current challenges, and strategies for meeting jitter requirements of the Europa Clipper Mission.
Seubert, Carl↗
Engineering topics
Seubert, Carl
Publications and source records attributed to Seubert, Carl.
Incremental States for Precise On-Orbit Relative Knowledge in Formation Flight
High precision and close proximity formation flight is an enabling technology for future space missions and requires an on-board relative navigation capability that is accurate to the mm-level and robust to formation parameters. Common estimation techniques linearize the entire formation about one spacecraft’s position, resulting in degraded accuracy due to linearization errors when separation distances become large. Additionally, methods which decouple absolute and relative state estimates usually require ad-hoc methods to incorporate the estimates together. This work discusses an alternative ”incremental” formulation of the relative navigation problem which is in variant to formation size, robust to coupling between absolute and relative dynamics, and can undergo similarity transformations to smoothly incorporate either absolute or relative information without numerical issues. A specific example of this architecture is presented in the context of formation navigation using Carrier-Differential Global Positioning System measurements, and is compared to a traditional leader-linearized filter. In the presence of accurate measurements, the incremental architecture is shown to reduce linearization errors and mean estimate errors by up to three orders of magnitude without the incorporation of new sensor information.
Seubert, Carl↗
Precise starshade stationkeeping and pointing with a Zernike wavefront sensor
Starshades, large occulters positioned tens of thousands of kilometers in front of space telescopes, o er one of the few paths to imaging and characterizing Earth-like extrasolar planets. However, for the starshade to generate a su ciently dark shadow on the telescope, the two must be coaligned to just 1 meter laterally, even at these large separations. The principal challenge to achieving this level of control is in determining the position of the starshade with respect to the space telescope. In this paper, we present numerical simulations and laboratory results demonstrating that a Zernike wavefront sensor coupled to a WFIRST-type telescope is able to deliver the stationkeeping precision required, by measuring light outside of the science wavelengths. The sensor can determine the starshade lateral position to centimeter level in seconds of open shutter time for stars brighter than eighth magnitude, with a capture range of 10 meters. We discuss the potential for fast (ms) tip/tilt pointing control at the milli-arcsecond level by illuminating the sensor with a laser mounted on the starshade. Finally, we present early laboratory results.
Shaklan, Stuart↗
A sub-arcsecond Pointing stability fine stage for a high altitude balloon platform
High-altitude balloons (HABs) are platforms for collecting astrophysical and planetary science data that offer a number of advantages compared to conventional groundbased or space-based systems. However, they also pose a set of new environmental challenges that must be addressed in order to offer a viable alternative to ground- or space- based assets. In particular, maintaining science-quality pointing stability is a critical challenge for HAB platforms. For these missions, dynamic errors must be limited to a fraction of the observation wavelength, so as the wavelength becomes smaller, it becomes more difficult to meet the needed performance. As a result, there are very few existing pointing stabilization solutions that use visible-spectrum guide stars, despite their relatively wide distribution across the sky. This paper describes the results achieved with the STABLE (Subarcsecond Telescope And BaLloon Experiment) project whose goal is to provide the fine pointing stage for a balloonborne platform observing in the visible wavelength.
Porter, Michael↗
BiBlade Sampling Tool Validation for Comet Surface Environments
The BiBlade sampling chain was developed for use in a potential Comet Surface Sample Return mission. Following prior versions of the sampling tool, a new tool was developed and validated to TRL 6. Sample acquisition testing was performed across a range of comet simulants and operational conditions. Tool operation was validated in a thermal-vacuum chamber. The end-to-end sampling chain was validated including sampling, sample measurement, and sample transfer. The sampling system is now ready for flight implementation.
Backes, Paul↗
COBALT: A GN&C Payload for Testing ALHAT Capabilities in Closed-Loop Terrestrial Rocket Flights
The COBALT (CoOperative Blending of Autonomous Landing Technology) payload is being developed within NASA as a risk reduction activity to mature, integrate and test ALHAT (Autonomous precision Landing and Hazard Avoidance Technology) systems targeted for infusion into near-term robotic and future human space flight missions. The initial COBALT payload instantiation is integrating the third-generation ALHAT Navigation Doppler Lidar (NDL) sensor, for ultra high-precision velocity plus range measurements, with the passive-optical Lander Vision System (LVS) that provides Terrain Relative Navigation (TRN) global-position estimates. The COBALT payload will be integrated onboard a rocket-propulsive terrestrial testbed and will provide precise navigation estimates and guidance planning during two flight test campaigns in 2017 (one open-loop and closed- loop). The NDL is targeting performance capabilities desired for future Mars and Moon Entry, Descent and Landing (EDL). The LVS is already baselined for TRN on the Mars 2020 robotic lander mission. The COBALT platform will provide NASA with a new risk-reduction capability to test integrated EDL Guidance, Navigation and Control (GN&C) components in closed-loop flight demonstrations prior to the actual mission EDL.
Carson, John M., III↗
Cobalt: Development and Maturation of GN&C Technologies for Precision Landing
The CoOperative Blending of Autonomous Landing Technologies (COBALT) instrument is a terrestrial test platform for development and maturation of guidance, navigation and control (GN&C) technologies for precision landing. The project is developing a third-generation Langley Research Center (LaRC) navigation doppler lidar (NDL) for ultra-precise velocity and range measurements, which will be integrated and tested with the Jet Propulsion Laboratory (JPL) lander vision system (LVS) for terrain relative navigation (TRN) position estimates. These technologies together provide precise navigation knowledge that is critical for a controlled and precise touchdown. The COBALT hardware will be integrated in 2017 into the GN&C subsystem of the Xodiac rocket-propulsive vertical test bed (VTB) developed by Masten Space Systems, and two terrestrial flight campaigns will be conducted: one open-loop (i.e., passive) and one closed-loop (i.e., active).
Carson, John M.↗