Search NASA⌕ Search

Engineering topics

Shai, C. M.

Publications and source records attributed to Shai, C. M..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Optical coatings formulations containing tetrafluoroethylene

Two optical reference coatings containing tetrafluorethylene have been formulated using silicone binders. One of the silicones used is an oligomer of methyl silanol supplied at 48 percent solids in a mixture of butanol and ethanol. The other silicone is a proprietory silicone tethered ethyl silicate based colloidal silica binder supplied at 22 and 36 percent solids in a mixture of low molecular weight aliphatic alcohols. The coatins are characterized by high durability and have an overall reflectance in the visible part of the spectrum of about 90 percent. The substrate preparation and application procedures are described.

Schutt, J. B.↗
NASA NTRS1977

Investigation of conductive thermal control coatings by a contactless method in vacuo

A technique for determining the conductance per unit area of thermal control coatings for electrostatically clean spacecraft is described. In order to simulate orbital conditions more closely, current-density-voltage (j-V) curves are obtained by a contactless method in which the paint on an aluminum substrate is the anode of a vacuum diode configuration with a tungsten filament cathode. Conductances per unit area which satisfy the International Sun Earth Explorer (ISEE) requirement were observed on black paints containing carbon and in white and green paints filled with zinc oxide which were fired in order to induce defect conductivity. Because of surface effects and the nonhomogeneous nature of paints, large discrepancies were found between measurements with the contactless method and measurements employing metallic contacts, particularly at low current densities. Therefore, measurements with metallic contacts are considered to be of questionable value in deciding the suitability of coatings for electrostatic charge control.

Viehmann, W.↗
NASA NTRS1973

Formulation procedures, rationale, and preliminary IMP-H flight data for silicone paints with improved stability

Results are given of a class of silicone paints undergoing space qualification on IMP-H. In addition to ultraviolet irradiation, samples are presently reclining about 10 to the 16th power solar wind protons per year. Preliminary data, covering the time span of the first anniversary, give incremental solar absorptances of 0.03 for two white paints, and 0.01 for leafing aluminum and a green tinted white paint. Complementing these data are complete descriptions of techniques used in making these paints, stabilizing the zinc oxide pigment, and choosing a solvent. Outgassing characteristics of finished coatings are also included. An attempt toward unification of these various aspects of the aerospace paint problem is provided through documented photochemical reactions, and a generalized band representation of the problem and its solutions.

Schutt, J. B.↗
NASA NTRS1973

Black silicate paints: Formulation and performance data on OSO-H

Formulations and general procedures are given for making and applying space environmentally, as well as atmospherically stable black silicate paints. Compositions are given which meet spacecraft self-contamination requirements, have excellent heat resistance, and are strongly semiconductive.

Schutt, J. B.↗
NASA NTRS1972

Formulation procedure and spectral data for a coatings system optimally employing the high intrinsic reflectance of barium sulphate

The use of polyvinyl alcohol as a binder for barium sulphate does not allow the intrinsically high reflectance of this material in the near vacuum ultraviolet to be optimally employed. In an effort to better utilize this property, completely inorganic coatings systems are described, where from the intrinsically high reflectance of barium sulphate in this spectral region can be gotten. Potassium sulphate turns out to be the preferred binder. Compositions, formulating procedures, and application techniques are included. For completeness, absolute and relative reflectance data are included for intra- and intersystem comparisons.

Schutt, J. B.↗