Studies of the Effects of Optical System Errors on the HCIT Contrast Performance
No abstract available
exoplanets↗
Engineering topics
Shaklan, Stuart
Publications and source records attributed to Shaklan, Stuart.
Diamond Turned High Precision PIAA Optics and Four Mirror PIAA System for High Contrast Imaging of Exo-planets
Off-axis, high-sag PIAA optics for high contrast imaging present challenges in manufacturing and testing. With smaller form factors and consequently smaller surface deformations (< 80 microns), diamond turned fabrication of these mirrors becomes feasible. Though such a design reduces the system throughput, it still provides 2(lambda)D inner working angle. We report on the design, fabrication, measurements, and initial assessment of the novel PIAA optics in a coronagraph testbed. We also describe, for the first time, a four mirror PIAA coronagraph that relaxes apodizer requirements and significantly improves throughput while preserving the low-cost benefits.
coronagraphy↗
Studies of the Effects of Optical System Errors on the HCIT Contrast Performance
The High Contrast Imaging Testbed (HCIT) at the Jet Propulsion Laboratory employs a broadband wavefront correction algorithm called Electric Field Conjugation (EFC) to obtain the required 10-10 contrast. This algorithm works with one deformable mirror (DM) to estimate the electric-field to be controlled, and with one or multiple DM's to create a "dark-hole" in a predefined region of the image plane where terrestrial planets would be found. We have investigated the effects of DM actuator errors and the optic position errors on the efficiency of the EFC algorithm in a Lyot coronagraph configuration. The structural design of the optical system as well as the parameters of various optical elements used in the analysis are drawn from those of the HCIT system that have been implemented with one DM. The simulation takes into account the surface errors of various optical elements. Results of some of these studies have been verified by actual measurements.
exoplanetsscopes↗
SIM Lite Detection of Habitable Planets in P-Type Binary-Planetary Systems
Close binary stars like spectroscopic binaries create a completely different environment than single stars for the evolution of a protoplanetary disk. Dynamical interactions between one star and protoplanets in such systems provide more challenges for theorists to model giant planet migration and formation of multiple planets. For habitable planets the majority of host stars are in binary star systems. So far only a small amount of Jupiter-size planets have been discovered in binary stars, whose minimum separations are 20 AU and the median value is about 1000 AU (because of difficulties in radial velocity measurements). The SIM Lite mission, a space-based astrometric observatory, has a unique capability to detect habitable planets in binary star systems. This work analyzed responses of the optical system to the field stop for companion stars and demonstrated that SIM Lite can observe exoplanets in visual binaries with small angular separations. In particular we investigated the issues for the search for terrestrial planets in P-type binary-planetary systems, where the planets move around both stars in a relatively distant orbit.
Pan, Xiaopei↗
Studies of the Effects of Actuator Errors on the HCIT/PIAA Contrast Performance
The High Contrast Imaging Testbed Phase Induced Amplitude Apodization (HCIT/PIAA) coronagraph system at JPL relies on an Electric-Field Conjugation (EFC) wavefront correction algorithm to obtain the required high contrast. This algorithm works with one deformable mirror (DM) to estimate the electric-field to be controlled, and with one or multiple DM's to create a "dark-hole" in the image plane. We have investigated the effects of DM actuator errors on the efficiency of the EFC algorithm. The structural design of the optical system as well as the parameters of various optical elements used in the analysis are drawn from those of the HCIT/PIAA system that have been and will be implemented with one or two DM's. The simulation takes into account the surface errors of various optical elements. In this paper, we report our findings in the case of narrowband wavelength light.
PIAA↗
Performance Sensitivity Studies on the PIAA Implementation of the High-Contrast Imaging Testbed
This slide presentation reviews the sensitivity studies on the Phase-Induced Amplitude Apodization (PIAA), or pupil mapping using the High-Contrast Imaging Testbed (HCIT). PIAA is a promising technique in high-dynamic range stellar coronagraph. This presentation reports on the investigation of the effects of the phase and rigid-body errors of various optics on the narrowband contrast performance of the PIAA/HCIT hybrid system. The results have shown that the 2-step wavefront control method utilizing 2-DMs is quite effective in compensating the effects of realistic phase and rigid-body errors of various optics
Phase-Induced Amplitude Apodization (PIAA)↗
ACCESS Concept Study for the Direct Imaging and Spectroscopy of Exoplanetary Systems
No abstract available
direct imaging↗
A General Tool for Evaluating High-Contrast Coronagraphic Telescope Performance Error Budgets
No abstract available
coronagraphy↗
Performance Sensitivity Studies on the PIAA Implementation of the High-Contrast Imaging Testbed
We have investigated the dependence of the High Contrast Imaging Testbed (HCIT) Phase Induced Amplitude Apodization (PIAA) coronagraph system performance on the rigid-body perturbations of various optics. The structural design of the optical system as well as the parameters of various optical elements used in the analysis are drawn from those of the PIAA/HCIT system that have been and will be implemented, and the simulation takes into account the surface errors of various optics. In this paper, we report our findings when the input light is a narrowband beam.
pupil mapping↗
STEPS: JPL's Astrometric Exoplanet Survey
Presentation topics include: STEPS ground-based astrometry at Hale Telescope; the instrument; why astronomy and why M-dwarfs; motion of center of light about center of mass in photocentric orbit; photocentric motion vs. fractional mass; high-resolution imaging of STEPS targets; GU 802 p one possible orbit plotted with data, Keplerian frame; GJ 802 results; STEPS future; and a bibliography of STEPS papers.
astrometry↗
TPF-C Performance Modeling
This slide presentation reviews the performance modeling of the Terrestrial Planet Finder Coronagraph (TPF-C). Included is a chart of the Error Budget Models, definitions of the static and dynamic terms, a chart showing the aberration sensitivity at 2 lambda/D, charts showing the thermal performance models and analysis, surface requirements, high-level requirements, and calculations for the beam walk model.Also included is a description of the control systems, and a flow for the iterative design and analysis cycle.
terrestrial planet finder↗
Closed Loop, DM Diversity-based, Wavefront Correction Algorithm for High Contrast Imaging Systems
High contrast imaging from space relies on coronagraphs to limit diffraction and a wavefront control systems to compensate for imperfections in both the telescope optics and the coronagraph. The extreme contrast required (up to 10(exp -10) for terrestrial planets) puts severe requirements on the wavefront control system, as the achievable contrast is limited by the quality of the wavefront. This paper presents a general closed loop correction algorithm for high contrast imaging coronagraphs by minimizing the energy in a predefined region in the image where terrestrial planets could be found. The estimation part of the algorithm reconstructs the complex field in the image plane using phase diversity caused by the deformable mirror. This method has been shown to achieve faster and better correction than classical speckle nulling.
Give'on, Amir↗
The JPL Cryogenic Dilatometer: Measuring the Thermal Expansion Coefficient of Aerospace Materials
This slide presentation details the cryogenic dilatometer, which is used by JPL to measure the thermal expansion coefficient of materials used in Aerospace. Included is a system diagram, a picture of the dilatometer chamber and the laser source, a description of the laser source, pictures of the interferometer, block diagrams of the electronics and software and a picture of the electronics, and software. Also there is a brief review of the accurace.error budget. The materials tested are also described, and the results are shown in strain curves, JPL measured strain fits are described, and the coefficient of thermal expansion (CTE) is also shown for the materials tested.
dilatometer↗
TPF-C: Status and Recent Progress
The Terrestrial Planet Finder Coronagraph (TPF-C) is a deep space mission designed to detect and characterize Earth-like planets around nearby stars. TPF-C will be able to search for signs of life on these planets. TPF-C will use spectroscopy to measure basic properties including the presence of water or oxygen in the atmosphere; powerful signatures in the search for habitable worlds. This capability to characterize planets is what allows TPF-C to transcend other astronomy projects and become an historical endeavor on a par with the discovery voyages of the great navigators.
Terrestrial Planet Finder Coronagraph (TPF-C)↗
Optimized program completeness
Overall program completeness is optimized by selecting the ordered set of observations and targets that maximizes the efficiency for the ensemble of stars. We describe the optimization approach and report on completeness sensitivity to instrument throughput, inner working angle, instrument sensitivity, observational overhead, exo-zodiacal brightness, and target revisit constraints.
optimization↗
Precision Cryogenic Dilatometer
A dilatometer based on a laser interferometer is being developed to measure mechanical creep and coefficients of thermal expansion (CTEs) of materials at temperatures ranging from ambient down to 15 K. This cryogenic dilatometer has been designed to minimize systematic errors that limit the best previously available dilatometers. At its prototype stage of development, this cryogenic dilatometer yields a strain measurement error of 35 ppb or 1.7 ppb/K CTE measurement error for a 20-K thermal load, for low-expansion materials in the temperature range from 310 down to 30 K. Planned further design refinements that include a provision for stabilization of the laser and addition of a high-precision sample-holding jig are expected to reduce the measurement error to 5-ppb strain error or 0.3-ppb/K CTE error for a 20-K thermal load. The dilatometer (see figure) includes a common-path, differential, heterodyne interferometer; a dual-frequency, stabilized source bench that serves as the light source for the interferometer; a cryogenic chamber in which one places the material sample to be studied; a cryogenic system for cooling the interior of the chamber to the measurement temperature; an ultra-stable alignment stage for positioning the chamber so that the sample is properly positioned with respect to the interferometer; and a data-acquisition and control system. The cryogenic chamber and the interferometer portion of the dilatometer are housed in a vacuum chamber on top of a vibration isolating optical table in a cleanroom. The sample consists of two pieces a pillar on a base both made of the same material. Using reflections of the interferometer beams from the base and the top of the pillar, what is measured is the change in length of the pillar as the temperature in the chamber is changed. In their fundamental optical and electronic principles of operation, the laser light source and the interferometer are similar to those described in Common-Path Heterodyne Interferometers (NPO-20786), NASA Tech Briefs, Vol. 25, No. 7 (July 2001), page 12a, and Interferometer for Measuring Displacement to Within 20 pm (NPO- 21221), NASA Tech Briefs, Vol. 27, No. 7 (July 2003), page 8a. However, the present designs incorporate a number of special geometric, optical, and mechanical features to minimize optical and thermal-expansion effects that contribute to measurement errors. These features include the use of low-thermal expansion materials for structural components, kinematic mounting and symmetrical placement of optical components, and several measures taken to minimize spurious reflections of laser beams.
Dudik, Matthew↗