Search NASA⌕ Search

Engineering topics

Shao, Yuyan

Publications and source records attributed to Shao, Yuyan.

At least 91 records · Page 5

Sparingly solvating electrolytes for high energy density Lithium–sulfur batteries

Moving to lighter and less expensive battery chemistries compared to lithium-ion requires the control of energy storage mechanisms based on chemical transformations rather than intercalation. Lithium sulfur (Li/S) has tremendous theoretical specific energy, but contemporary approaches to control this solution-mediated, precipitation-dissolution chemistry requires using large excesses of electrolyte to fully solubilize the polysulfide intermediate. Achieving reversible electrochemistry under lean electrolyte operation is the only path for Li/S to move beyond niche applications to potentially transformational performance. An emerging topic for Li/S research is the use of sparingly solvating electrolytes and the creation of design rules for discovering new electrolyte systems that fundamentally decouple electrolyte volume from reaction mechanism. Furthermore, this perspective presents an outlook for sparingly solvating electrolytes as the key path forward for longer-lived, high-energy density Li/S batteries including an overview of this promising new concept and some strategies for accomplishing it.

25 ENERGY STORAGE↗

Ammonium Additives to Dissolve Lithium Sulfide through Hydrogen Binding for High-Energy Lithium–Sulfur Batteries

In rechargeable Li-S batteries, the uncontrollable passivation of electrodes by highly insulating Li2S limits sulfur utilization, increases polarization and decreases cycling stability. Dissolving Li2S in organic electrolyte is a facile solution to maintain the active reaction interface between electrolyte and sulfur cathode, and thus address the above issues. Herein, ammonium salts are demonstrated as effective additives to promote the dissolution of Li2S to 1.25 M in DMSO solvent at room temperature. NMR measurements show that the strong hydrogen binding effect of N-H groups plays a critical role in dissolving Li2S by forming complex ligands with S2- anions coupled with the solvent’s solvating surrounding. Ammonium additives in electrolyte can also significantly improve the oxidation kinetics of Li2S, therefore enables the direct use of Li2S as cathode material in Li-S battery system in the future. This provides a new approach to manage the solubility of lithium sulfides through cation coordination with sulfide anion.

Environmental Molecular Sciences Laboratory↗

Role of Manganese Deposition on Graphite in the Capacity Fading of Lithium Ion Batteries

Lithium-ion batteries utilizing manganese based cathodes have received considerable interest in recent years for their lower cost and favorable environmental friendliness relative to their cobalt counterparts. However, Li-ion batteries using manganese based cathodes and graphite anodes suffer from severe capacity fading at higher operating temperature. In this article, we report on an astute investigation into how the dissolution of manganese impacts the capacity fading within the Li-ion batteries. Our investigation reveals that the manganese dissolves from the cathode, transports to the graphite electrode, and deposits onto the outer surface of the inner most solid electrolyte interphase (SEI) layer which is known to be a mixture of inorganic salts (e.g. Li2CO3, LiF, and Li2O). In this location, the manganese facilitates the reduction of the electrolyte and the subsequent formation of lithium containing products on the graphite which removes lithium ions from the normal operation of the cell and thereby induces the severe capacity fade.

Environmental Molecular Sciences Laboratory↗

Molecular Storage of Mg Ions with Vanadium Oxide Nanoclusters

Mg batteries have potential advantages in terms of safety, cost and reliability over existing battery chemistries, but their practical implementation is hindered substantially by the lack of amenable high voltage cathode materials. The development of cathode materials is complicated by a limited understanding of the unique divalent Mg ion electrochemistry. Here we show that highly dispersed vanadium oxide nanoclusters supported on porous carbon frameworks were able to react with Mg ions reversibly in electrolytes that are compatible with Mg metal, and exhibited high capacities and good reaction kinetics. Electrodes with the composite materials were able to deliver initial capacities exceeding 300 mAh/g at 40 mA/g in the voltage window of 0.5 to 2.8V. The combined electron microscope, spectroscopy and electrochemistry characterizations suggest the reaction is surface-controlled and may be best described as through a molecular reaction mechanism. This work could provide a new approach of using nanoclusters and the molecular energy storage mechanism to design electrode materials for Mg batteries.

Environmental Molecular Sciences Laboratory↗

Atomistic Conversion Reaction Mechanism of WO 3 in Secondary Ion Batteries of Li, Na, and Ca

Abstract Intercalation and conversion are two fundamental chemical processes for battery materials in response to ion insertion. The interplay between these two chemical processes has never been directly seen and understood at atomic scale. Here, using in situ HRTEM, we captured the atomistic conversion reaction processes during Li, Na, Ca insertion into a WO 3 single crystal model electrode. An intercalation step prior to conversion is explicitly revealed at atomic scale for the first time for Li, Na, Ca. Nanoscale diffraction and ab initio molecular dynamic simulations revealed that after intercalation, the inserted ion–oxygen bond formation destabilizes the transition‐metal framework which gradually shrinks, distorts and finally collapses to an amorphous W and M x O (M=Li, Na, Ca) composite structure. This study provides a full atomistic picture of the transition from intercalation to conversion, which is of essential importance for both secondary ion batteries and electrochromic devices.

He, Yang↗

Atomistic Conversion Reaction Mechanism of WO 3 in Secondary Ion Batteries of Li, Na, and Ca

Abstract Intercalation and conversion are two fundamental chemical processes for battery materials in response to ion insertion. The interplay between these two chemical processes has never been directly seen and understood at atomic scale. Here, using in situ HRTEM, we captured the atomistic conversion reaction processes during Li, Na, Ca insertion into a WO 3 single crystal model electrode. An intercalation step prior to conversion is explicitly revealed at atomic scale for the first time for Li, Na, Ca. Nanoscale diffraction and ab initio molecular dynamic simulations revealed that after intercalation, the inserted ion–oxygen bond formation destabilizes the transition‐metal framework which gradually shrinks, distorts and finally collapses to an amorphous W and M x O (M=Li, Na, Ca) composite structure. This study provides a full atomistic picture of the transition from intercalation to conversion, which is of essential importance for both secondary ion batteries and electrochromic devices.

He, Yang↗

Restricting the Solubility of Polysulfides in Li-S Batteries Via Electrolyte Salt Selection

Polysulfide solubility in the electrolyte has a critical role to the Li-S battery but the mechanism study on the solubility needs to be carefully carried out. In this paper we found that lithium 2-trifluoromethyl-4,5-dicyanoimidazole (LiTDI) reveals a suppression of the polysulfide solubility in electrolytes (relative to the most widely used electrolyte formulation) and the Li-S cells achieved homogeneous stable capacity retention upon extensive cycling and Li metal deposition on the anode. Combined experimental, simulation and calculation methods suggest the dominate disproportionation product of Li2S8 is Li2S4 in the LiTDI electrolyte due to a different interaction between lithium ion and TDI anion. The Li2S4 would continuesly form a Li4S8 dimer and be fully locallized to precipitate out. The use of the electrolyte with the LiTDI salt (with polysulfide and LiNO3 additives) enabled a cell with a high sulfur (3 mg-S cm-2) loading to deliver a 1.67 mAh cm-2 areal capacity after 300 stable cycles at a high current (2.4 mA cm-2) density.

Environmental Molecular Sciences Laboratory↗

Novel Hybrid Microbial Electrochemical System for Efficient Hydrogen Generation from Biomass (Final Technical Report)

The overall goal of this proposal was to develop a novel microbial electrochemical system for H 2 production from biomass at a cost less than $2/kg H 2 . The specific objectives of this project were: (1) design and fabricate a low-cost, robust, and highly efficient hybrid fermentation and microbial electrochemical cell (MEC) reactor, and (2) determine the techno-economic feasibility of the system for H 2 generation from lignocellulosic biomass hydrolysates and sugar-rich wastewater. We achieved the first objective by developing a system with the following characteristics: (a) a hybrid bioreactor that combines the strengths of dark fermentation and microbial electrolysis processes; (b) novel electrode assembly in the reactor that contains robust, low-cost, efficient catalyst, electrode and separator materials; (c) optimized operational conditions that lower the energy input and enhance H 2 yield and production rate. We achieved the second objective by developing a cost-performance model to identify key factors that affect performance and cost of H 2 production and guide/prioritize research. The research conducted in this project has advanced the knowledge in the fields of dark fermentation, microbial electrochemistry and technologies, and electrocatalysis. It has enhanced our understanding of how the H 2 production is affected by the bacterial culture, feedstock composition, and environmental conditions in both dark fermentation and MEC processes and what are the key microbial processes that hinder the H 2 production using single chamber MEC reactors and mixed bacterial cultures. The research has revealed the synthesis-structure-property relationship of a H 2 evolution reaction (HER) catalyst. This proposed technology represents a green and renewable approach for H 2 production from biomass. The biomass harvested in the country could provide enough H 2 to fuel light-duty vehicles in the US. When using wastewater as feedstock, the simultaneous wastewater treatment during H 2 production process can further increase the environmental sustainability. The research conducted in this project has brought the biological H 2 production technologies closer to practical applications by: 1) determining the suitable mixed bacterial cultures using complex feedstocks; 2) developing fermentative bacterial enrichment and immobilization methods for enhancing the H 2 production rate; 3) developing low-cost molybdenum phosphide (MoP) HER catalysts to lower the capital cost; 4) determining the suitable design (e.g. reactor configuration, electrode surface area to rector volume ratio, liquid/gas separator) and operational conditions (e.g. pH, temperature, feedstock loading, mixing conditions) to lower the capital and operational costs; 5) fabricating a 10-L hybrid reactor to demonstrate the potential of H 2 production. Our cost performance analysis suggests that further increasing the current density and reducing the electrode costs are critical to meet the $2/kg cost target using lignocellulosic biomass feedstock and the cost target is achievable using wastewater as feedstock if the wastewater treatment credit is considered.

08 HYDROGEN↗

Electrocatalysts by atomic layer deposition for fuel cell applications

Here, fuel cells are a promising technology solution for reliable and clean energy because they offer high energy conversion efficiency and low emission of pollutants. However, high cost and insufficient durability are considerable challenges for widespread adoption of polymer electrolyte membrane fuel cells (PEMFCs) in practical applications. Current PEMFCs catalysts have been identified as major contributors to both the high cost and limited durability. Atomic layer deposition (ALD) is emerging as a powerful technique for solving these problems due to its exclusive advantages over other methods. In this review, we summarize recent developments of ALD in PEMFCs with a focus on design of materials for improved catalyst activity and durability. New research directions and future trends have also been discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanostructured Electrocatalysts for PEM Fuel Cells and Redox Flow Batteries: A Selected Review

PEM fuel cells and redox flow batteries are two very similar technologies which share common component materials and device design. Electrocatalysts are the key components in these two devices. In this Review, we discuss recent progress of electrocatalytic materials for these two technologies with a focus on our research activities at Pacific Northwest National Laboratory (PNNL) in the past years. This includes (1) nondestructive functionalization of graphitic carbon as Pt support to improve its electrocatalytic performance, (2) triple-junction of metal–carbon–metal oxides to promote Pt performance, (3) nitrogen-doped carbon and metal-doped carbon (i.e., metal oxides) to improve redox reactions in flow batteries. A perspective on future research and the synergy between the two technologies are also discussed.

Shao, Yuyan↗

Interface Promoted Reversible Mg Insertion in Nanostructured Tin-Antimony Alloys

This paper demonstrates intermetallic compounds SnSb are highly active materials for reversibly hosting Mg ions. Compared with monometallic Sn and Sb, SnSb alloy exhibited exceptionally high reversible capacity (420 mAh/g), excellent rate capability and good cyclic stability. Mg insertion into pristine SnSb involves an activation process to complete, which induces particle breakdown and results in phase segregation to Sn-rich and Sb-rich phases. Both experimental analysis and DFT simulation suggest that the Sn-rich phase is particularly active and provides most of the capacity whereas the Sb-rich phase is not as active, and the interface between these two phases play a key role in promoting the formation and stabilization of the cubic Sn phase that is more favorable for fast and reversible Mg insertion. We further show that activated SnSb alloy has good compatibility with simple Mg electrolytes. Overall, this work could provide new approaches for designing materials capable of reversible Mg ion insertion and new opportunities for understanding Mg electrochemistry.

Environmental Molecular Sciences Laboratory↗

Energy storage devices having anodes containing Mg and electrolytes utilized therein

For a metal anode in a battery, the capacity fade is a significant consideration. In energy storage devices having an anode that includes Mg, the cycling stability can be improved by an electrolyte having a first salt, a second salt, and an organic solvent. Examples of the organic solvent include diglyme, triglyme, tetraglyme, or a combination thereof. The first salt can have a magnesium cation and be substantially soluble in the organic solvent. The second salt can enhance the solubility of the first salt and can have a magnesium cation or a lithium cation. The first salt, the second salt, or both have a BH.sub.4 anion.

25 ENERGY STORAGE↗

High Performance and Durable Low PGM Cathode Catalysts

There is a strong need to decrease the amount of Pt electrocatalyst used in fuel cells and increase its durability for transportation application. Conventional strategies include Pt nanocrystals and Pt alloy with well-controlled structures, durable carbon support, non-carbon support, etc. We have developed the so-called “metal-metal oxide-carbon” triple junction concept to stabilize Pt and protect carbon from corrosion. It also improved the activity of Pt. The good performance was not achieved in fuel cell test mainly because of the transport issue due to the use of 2D graphene. In this project, our main goal is to demonstrate the concept in fuel cell device test using 3D porous graphene as support so that the transport issue could be addressed.

08 HYDROGEN↗

On the Way Toward Understanding Solution Chemistry of Lithium Polysulfides for High Energy Li-S Redox Flow Batteries

Lithium sulfur (Li-S) redox flow battery (RFB) is a promising candidate for high energy large-scale energy storage application due to good solubility of long-chain polysulfide species and low cost of sulfur. In this report, recent progress and new concepts for Li-S redox flow batteries are discussed with an emphasis on the fundamental understanding and control of lithium polysulfide chemistry to enable the development of liquid phase Li-S redox flow prototype cells. These differ significantly from conventional static Li-S batteries targeting for vehicle electrification. A high solubility of the different lithium polysulfides generated at different depths of discharge and states of charge is required for a flow battery in order to take full advantage of the multiple electron transitions between elemental sulfur and Li2S. A new DMSO-based electrolyte is proposed for Li-S redox flow batteries, which not only enables the high solubility of lithium polysulfide species, especially for the short-chain species, but also results in excellent cycling with a high Coulombic efficiency. The challenges and opportunities for the Li-S redox flow concept have also been discussed in depth.

Environmental Molecular Sciences Laboratory↗

Methods and electrolytes for electrodeposition of smooth films

Electrodeposition involving an electrolyte having a surface-smoothing additive can result in self-healing, instead of self-amplification, of initial protuberant tips that give rise to roughness and/or dendrite formation on the substrate and/or film surface. For electrodeposition of a first conductive material (C1) on a substrate from one or more reactants in an electrolyte solution, the electrolyte solution is characterized by a surface-smoothing additive containing cations of a second conductive material (C2), wherein cations of C2 have an effective electrochemical reduction potential in the solution lower than that of the reactants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗