Search NASASearch

Engineering topics

Shaughnessy, J. D.

Publications and source records attributed to Shaughnessy, J. D..

Conceptual design and simulator implementation of an automatic terminal approach system

The pilot-machine interface with aircraft automation to increase the safety and utility of single-pilot IFR (instrument flight rules) operations is addressed. An automatic terminal approach system (ATAS), that uses stored instrument approach data to automatically tune aircraft radios and control the aircraft autopilot, was conceived as a means of improving this critical interface. The ATAS automatically flies instrument approach procedures, including the missed approach, and provides for easy pilot interaction to accommodate air traffic control radar vectors and altitude assignments. A research prototype of an ATAS was developed to the extent necessary for a simulation implementation and piloted evaluation. The development of the ATAS concept and the software algorithms is described.

Hinton, D. A.

The pilot interface with cockpit automation and advanced avionics systems

A flight test program was conducted with a sophisticated, integrated avionics system to study pilot workload and the pilot interface with high levels of avionics capability. The study indicates that advanced systems can provide improved information to the pilot and additional functional capability. The study also indicates that additional research is needed to develop the knowledge base required to design pilot interfaces with such systems. The combination of the pilot interface and the high level of system capability used in this study led to pilot blunders associated with navigation data management, autopilot management, and maintaining awareness of system status. A functional relationship is suggested between level of avionics system sophistication and the required state-of-the-art in pilot/avionics interface design. Suggested guidelines for the design of the pilot/avionics interface for advanced avionics systems are given.

Hinton, D. A.

Controls, Displays, and Information Transfer for General Aviation IFR Operations

The purpose of the workshop was to review and evaluate the work performed under the NASA Single Pilot IFR (SPIFR) program, to highlight and disseminate major research findings, and to provide a forum for industry, universities, and government to interact and discuss the future thrust of research in the SPIFR program. The presentations selected represent key elements of the SPIFR program. These elements are classified into five disciplinary areas: program definition, controls, displays, information transfer, and research simulation facilities. Emphasis is also placed on aircraft accident investigation.

Bergeron, H. P.

Single pilot IFR program overview and status

The history of the General Aviation Single Pilot IFR research program at NASA LaRC was discussed in general terms. The program objective, justification, and technical approach were given. The facilities used to conduct the research were discussed briefly. A general overview of recent accomplishments, present activities and near term plans were given.

Shaughnessy, J. D.

Helicopter sling loads

Computer program compares various control-system concepts for improving handling qualities of single-rotor helicopters carrying relatively-large external sling loads. Computer program developed to test these and other ideas helps to circumvent expensive prototype and field testing. Comparisons between (1) computed data and flight data, (2) simulation-system values and flight test data, and (3) pilot evaluations of simulation and actual-flight conditions are very favorable.

Shaughnessy, J. D.

Development and validation of a piloted simulation of a helicopter and external sling load

A generalized, real time, piloted, visual simulation of a single rotor helicopter, suspension system, and external load is described and validated for the full flight envelope of the U.S. Army CH-54 helicopter and cargo container as an example. The mathematical model described uses modified nonlinear classical rotor theory for both the main rotor and tail rotor, nonlinear fuselage aerodynamics, an elastic suspension system, nonlinear load aerodynamics, and a loadground contact model. The implementation of the mathematical model on a large digital computing system is described, and validation of the simulation is discussed. The mathematical model is validated by comparing measured flight data with simulated data, by comparing linearized system matrices, eigenvalues, and eigenvectors with manufacturers' data, and by the subjective comparison of handling characteristics by experienced pilots. A visual landing display system for use in simulation which generates the pilot's forward looking real world display was examined and a special head up, down looking load/landing zone display is described.

Shaughnessy, J. D.

Single pilot IFR operating problems determined from accidental data analysis

The accident reports examined were restricted to instrument rated pilots flying in IFR weather. A brief examination was made of accidents which occurred during all phases of flight and which were due to all causes. A detailed examination was made of those accidents which involved a single pilot which occurred during the landing phases of flight, and were due to pilot error. Problem areas found include: (1) landing phase operations especially final approach, (2) pilot weather briefings, (3) night approaches in low IFR weather, (4) below minimum approaches, (5) aircraft icing, (6) imprecise navigation, (7) descending below minimum IFR altitudes, (8) fuel mismanagement, (9) pilot overconfidence, and (10) high pilot workload especially in twins. Some suggested areas of research included: (1) low cost deicing systems, (2) standardized navigation displays, (3) low cost low-altitude warning systems, (4) improved fuel management systems, (5) improved ATC communications, (6) more effective pilot training and experience acquisition methods, and (7) better weather data dissemination techniques.

Forsyth, D. L.

Adaptation of time line analysis program to single pilot instrument flight research

A data base was developed for SPIFR operation and the program was run. The outputs indicated that further work was necessary on the workload models. In particular, the workload model for the cognitive channel should be modified as the output workload appears to be too small. Included in the needed refinements are models to show the workload when in turbulence, when overshooting a radial or glideslope, and when copying air traffic control clearances.

Hinton, D. A.

Helicopter sling load accident/incident survey: 1968 - 1974

During the period considered a mean of eleven accidents per year occurred and a mean of eleven persons were killed or seriously injured per year. Forty-one percent of the accidents occurred during hover, and 63 percent of the accidents had pilot error listed as a cause/factor. Many accidents involved pilots losing control of the helicopter or allowing a collision with obstructions to occur. There was a mean of 58 incidents each year and 51 percent of these occurred during cruise.

Shaughnessy, J. D.

Investigation of longitudinal control system for a small hydrofoil boat

An analysis of a hydromechanical system for longitudinal control of a small hydrofoil boat is presented. The system incorporates height and acceleration sensors operating flaps on the foils through a mechanical linkage. Effects of some of the system parameters on the stability and response to waves are shown. The results indicate that the system is capable of providing adequate stability, but the response to stern waves at low frequencies is larger than desired.

Phillips, W. H.

A system for spacecraft attitude control and energy storage

A conceptual design for a double-gimbal reaction-wheel energy-wheel device which has three-axis attitude control and electrical energy storage capability is given. A mathematical model for the three-axis gyroscope (TAG) was developed, and a system of multiple units is proposed for attitude control and energy storage for a class of spacecraft. Control laws were derived to provide the required attitude-control torques and energy transfer while minimizing functions of TAG gimbal angles, gimbal rates, reaction-wheel speeds, and energy-wheel speed differences. A control law is also presented for a magnetic torquer desaturation system. A computer simulation of a three-TAG system for an orbiting telescope was used to evaluate the concept. The results of the study indicate that all control and power requirements can be satisfied by using the TAG concept.

Shaughnessy, J. D.

Effects of certain control-system nonlinearities on stability and pointing of an attached double-gimbal experiment package in presence of random crew-motion disturbances

The effects of two types of control-system nonlinearities, sensor deadband and actuator breakout torque, on the pointing capability of a Apollo Telescope Mount (ATM) double-gimbal experiment isolation and control system are investigated. A composite structural model of a flexible experiment package connected through frictionless double gimbals to a flexible carrier vehicle is used for this investigation. Contributions of the primary carrier control system to experiment pointing are neglected. Pointing errors onboard the experiment package due to random crew-motion input into the carrier vehicle are computed. A stability investigation is performed to verify control-system stability with nominal nonlinearities and gains. Indications are that there is no stability problem due to the nonlinearities. A nonlinearity sensitivity study is carried out to determine the effects on pointing accuracy. Its results indicate that nominal ATM control system nonlinearities limit the pointing accuracy to approximately 0.4 arc second in the presence of crew motion. Methods of reducing the error to less than 0.1 arc second are discussed.

Shaughnessy, J. D.

On the stability and pointing of an attached double-gimbal experiment package

The pointing capability of a double gimbal experiment isolation and control system of the Apollo telescope mount (ATM) type was investigated. Three composite structural models of an experiment package connected through frictionless gimbals to a carrier vehicle (including a rigid package-rigid carrier model, a rigid package-flexible carrier model, and a flexible package-flexible carrier model) were used, and a linear model of the nominal ATM gimbal control system is considered. A linear stability analysis was performed to verify stability of the control system with nominal gains. Transform techniques were used to compute pointing errors onboard the experiment package due to random crew motions input into the carrier vehicle. Results of the investigation indicate that there is no stability problem due to flexible coupling of the experiment package and the carrier, and that the ATM-type system is capable of pointing accuracies better than 0.1 arc second.

Groom, N. J.