Search NASA⌕ Search

Engineering topics

Shelton, William A.

Publications and source records attributed to Shelton, William A..

13 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Continuous pressure-induced valence and magnetic transitions in EuMnSb 2

EuMnSb 2 is a unique and promising compound with complex magnetism (Eu and Mn sublattices) to realize magnetic control of topological quasiparticles. By applying pressure (P) to this system, we have observed a continuous pressure-induced valence change from Eu 2+ to Eu 3+ . Remarkably, despite the significant valence change in Eu ions, an extremely large increase in the magnetic ordering temperature (T N,Eu ) from 21 K at ambient pressure to 180 K at 28.4 GPa is detected.The substantial enhancement in T N,Eu is likely the consequence of the reduced distance between neighboring Eu ions and the enhanced indirect exchange interaction through increased 4f -5d mixing under pressure. Furthermore, T N,Eu (P) shows a discontinuous change above 8 GPa, although the orthorhombic crystal structure remains stable. Our experimental data indicate the record high value in the magnetic hyperfine field of 151 Eu, reaching 74.1 T at 28.4 GPa and 26 K. In conclusion, these unusual electronic and magnetic transitions revealed by pressure highlight that EuMnSb 2 is a rich magnetic topological semimetal candidate for investigating a multitude of strong correlations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Three-dimensional superconductivity induced by an extremely small amount of Li in Li x ⁢SnSe 2

Unconventional superconductivity occurs often in materials with low dimensionality. Furthermore, we report superconductivity observed in layered Li x SnSe 2 with the superconducting transition temperature T c ~ 6 K. Through L⁢i + intercalation in semiconducting SnSe 2 via electrochemical process, Li x ⁢SnSe 2 is formed with an extremely small x value as estimated from the c-axis lattice parameter, carrier concentration, and first-principles calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electronic and vibrational properties of bulk Cr 2 Ge 2 Te 6 from first-principles calculations

Here we use density functional theory based ab initio calculations to investigate the structural, vibrational, magnetic, and electronic properties of the layered ferromagnet Cr 2 Ge 2 Te 6 (CGT) that has attracted attention for potential spintronic applications. We optimize the structure for a fixed c/a ratio. Our results are in excellent agreement with experimental data on structure, phonons, and electronic properties. The use of van der Waals interactions and relativistic spin-orbit coupling yields accurate lattice constants and interlayer distances. Simultaneously, the adopted theoretical methods lead to a rigorous description of the vibrational normal modes, as well as the valence bands, that are in excellent agreement with Raman spectroscopy and angle-resolved photoemission spectroscopy spectra, respectively. The magnetic moment is slightly overestimated, and the magnetic anisotropy has the correct sign but is greater in magnitude than that in experiment. We find that inclusion of the on-site Coulomb repulsion on Cr−3d orbitals worsens agreement with experiment, in contrast to previous studies. Our results provide a path toward ab initio analysis of magnetic heterostructures based on CGT.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Theoretical investigation of surface chemical reactivity of compositionally disordered multi-metallic alloys

Alloys are widely used in both academic and industrial research as heterogeneous catalysts for accelerating technologically important reactions ranging from hydrocarbon reforming, selective hydrogenation, to electrochemical reactions involving hydrogen and oxygen that are fundamental and indispensable to a sustainable future energy infrastructure. Most basic catalysis research has been limited to combinations of two elements that are usually ordered in some manner at the nanoscale because doing so allows observable results to be easily rationalized. It however leaves a huge material space consisting of multi metallic, compositionally disordered alloys unexplored. This research demonstrates a viable theoretical approach combining different types of first principles calculations (including Green’s function-based Korringa–Kohn–Rostoker coherent potential approximation (KKR–CPA) and planewave-based density functional theory) to enable the surface chemical reactivity of compositionally complex alloy surfaces to be investigated. We demonstrate the approach by investigating hydrogen adsorption and evolution on two types of compositionally disordered alloys: a quaternary CoCrFeNi high-entropy alloy, and binary Pt-3d base metal alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Building Neutron Scattering Infrastructure in Louisiana for Advanced Materials (Final Report)

The main objective of the Louisiana Consortium for Neutron Scattering (LaCNS) is to build a major neutron scattering infrastructure capable of treating both soft and hard materials. The goal is to create a sustainable effort having the quality, breadth, and depth necessary to produce competitive proposals including collaborative and center type proposals. Our scientific aim is to understand the role of coupling in emergent complex materials and its impact on the structure/property relationship and to explore how to tune the key couplings to guide the design of materials with the desired properties. This naturally includes building a base of users of the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) in Louisiana; to train highly talented graduate and post-doctoral students in synthesis, neutron scattering, and simulation and modeling techniques, thereby helping to produce the next generation of scientist who use neutron scattering techniques as a crucial part of their research. The goal of our hard matter program is to understand the interplay between spin, charge, orbital, and lattice degrees of freedom in carefully selected complex materials. We have made considerable progress on number of complex systems including the oxide Sr3(Ru1-xMnx)2O7 where short-range magnetic ordering with anisotropic spin texture is initiated at the metal-insulator transition that clearly indicates a strong spin-charge coupling. Another critical area is in quantum materials. For example, in the topological semimetal BaMnSb2, we found a 3D canted antiferromagnetic Weyl semimetal with a 2D electronic structure and a nontrivial Berry phase. In addition, in the hexagonal chiral Mn1/3NbS2 system, we found soliton/soliton and soliton/antisoliton domain walls where the application of small fields or small currents can be used to control nanoscopic magnetic domains where the control of domain walls is crucially important for information storage. In addition, chemical transformation investigations were performed on the VISION instrument at Spallation Neutron Source (SNS). The soft matter effort was focused on understanding the role of non-covalent interactions on the structure and dynamics of fluid-based soft matter. One key focus was on sequence-defined (SD) amphiphilic peptoid polymers that allow encoding of molecular interactions and thereby systematic investigations of how charge directs the solution self-assembly of amphiphilic polymers in water. Another important area was on the dynamics of lipids self-assembled into membranes for exploring the permeability and mechanical using both neutron spin echo (NSE) spectroscopy and quasielastic neutron scattering (QENS) to distinguished between viscoelasticity and permeability at the molecular scale. Overall, the LaCNS project was quite successful, generating 145 publications and 245 presentations. Our graduate and post-doctoral students were well trained resulting in positions in national laboratories (Oak Ridge National Laboratory (ORNL), Argonne National Laboratory and Los Alamos National Laboratory), major research universities, and industry. We also developed a uniaxial pressure cell along with ORNL for SNS. A critical goal of this project was to establish a foundation for competing nationally in federally funded research programs. To this end, we were quite successful in generating over twenty-two federally and non-federally funded grants including awards from NSF, DOE, and DOD, and two early career awards. Equally important, we were able to secure a key major piece of instrumentation via a large ARO grant for a state-of-the-art electron microscope.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Partial charge transfer and absence of induced magnetization in EuS(111)/Bi 2 Se 3 heterostructures

We report that heterostructures made from topological and magnetic insulators promise to form excellent platforms for new electronic and spintronic functionalities mediated by interfacial effects. We report the results of a first-principles density functional theory study of the geometric, electronic structure, and magnetic properties of the EuS( 111 )/Bi 2 Se 3 interface, including van der Waals and relativistic spin-orbit effects. In contrast to previous theoretical studies, we find no appreciable magnetic anisotropy in such a heterostructure. We also do not see additional induced magnetization at the interface or the magnetic proximity effect on the topological states. This is due to the localized nature of Eu moments and because of a partial charge transfer of ~ 0.5 electron from Eu to Se. The formation of the surface dipole shifts the Dirac cone about 0.4 eV below the chemical potential, and the associated electrostatic screening moves the topological state from the first to the second quintuple layer of Bi 2 Se 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterisation of nano-assemblies inside mesopores using neutron scattering

Adsorption of molecular and nanoscale matter in mesoporous materials is important in filtration and chromatography as well as membrane processes. However, the morphology and distribution of self-assembled structures of adsorbate formed within nanoconfined environments is largely unknown. Small Angle Neutron Scattering (SANS) with porous matrix matching the neutron scattering length density of the solvent has the potential to provide detailed information on the self-assemblies formed in pore spaces. However, analysis of such SANS profiles remains a challenge. In this study, we extend the SANS analysis method previously developed by Findenegg and co-workers to include interparticle correlations, providing a qualitative characterisation of the adsorption state of surfactants and nanoparticles in the cylindrical pores of silica nanomaterials. We find that the pore filling fraction and the self-assembled state of the adsorbate governs the scattering profile. We apply the model to two materials namely, triethyleneglycol monohexyl ether (C 6 E 3 ) surfactant and gold nanoparticles adsorbed in SBA-15 mesoporous silica. In contrast to the C 6 E 3 system, Bragg scattering dominates the diffuse scattering in gold nanoparticle system, which we attribute to the immobile internal structure of the nanoparticles. In conclusion, this new SANS analysis method has potential to elucidate structures of soft matter nanoassemblies inside mesopores.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Hydrogen Adsorption on Ordered and Disordered Pt-Ni Alloys

The bulk properties and chemical reactivity of disordered Pt-Ni alloys in the A1 ( fcc ) structure are investigated herein using different methods: Virtual Crystal Approximation (VCA), Korringa–Kohn–Rostoker Coherent Potential Approximation (KKR-CPA), and large explicit supercells generated using Super-Cell Random Approximates (SCRAPs). While VCA predicts lattice constants that closely follow Vegard’s law, the large supercells and KKR-CPA predict lattice constants that are consistently larger than Vegard’s law. KKR-CPA results closely agree with those from the large supercells for the disordered alloys, producing similar projected density of states and magnetic moment across the composition range. For instance, while VCA predicts the disordered alloys to be non-magnetic at a Pt concentration ( x Pt ) ≥ 0.5, KKR-CPA and SCRAPs predict the disordered alloys to remain ferromagnetic to higher Pt concentrations. As x Pt decreases, the adsorption of H becomes more exothermic on bulk-terminated (111) surfaces but less exothermic on Pt monolayer-terminated (111) surfaces due largely to strain effects. (111) surfaces cut from the large supercells predict average H adsorption energies on the disordered alloys similar to those on the ordered phases of the same compositions, while VCA predicts H adsorption to be more exothermic.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A Noble-Transition Alloy Excels at Hot-Carrier Generation in the Near Infrared

Above-equilibrium “hot”-carrier generation in metals is a promising route to convert photons into electrical charge for efficient near-infrared optoelectronics. However, metals that offer both hot-carrier generation in the near-infrared and sufficient carrier lifetimes remain elusive. Alloys can offer emergent properties and new design strategies compared to pure metals. In this work, it is shown that a noble-transition alloy, Au x Pd 1-x , outperforms its constituent metals concerning generation and lifetime of hot carriers when excited in the near-infrared. At optical fiber wavelengths (e.g., 1550 nm), Au 50 Pd 50 provides a 20-fold increase in the number of ≈0.8 eV hot holes, compared to Au, and a threefold increase in the carrier lifetime, compared to Pd. The discovery that noble-transition alloys can excel at hot-carrier generation reveals a new material platform for near-infrared optoelectronic devices.

36 MATERIALS SCIENCE↗