Engineering topics
Shen, B.
Publications and source records attributed to Shen, B..
Local structure order in Pd 78 Cu 6 Si 16 liquid
The short-range order (SRO) in Pd 78 Cu 6 Si 16 liquid was studied by high energy x-ray diffraction and ab initio molecular dynamics (MD) simulations. The calculated pair correlation functions at different temperatures agree well with the experimental results. The partial pair correlation functions from ab intio MD simulations indicate that Si atoms prefer to be uniformly distributed while Cu atoms tend to aggregate. By performing structure analysis using Honeycutt-Andersen index, Voronoi tessellation, and atomic cluster alignment method, we show that the icosahedron and face-centered cubic SRO increase upon cooling. The dominant SRO is the Pd-centered Pd 9 Si 2 motif, namely the structure of which motif is similar to the structure of Pd-centered clusters in the Pd 9 Si 2 crystal. The study further confirms the existence of trigonal prism capped with three half-octahedra that is reported as a structural unit in Pd-based amorphous alloys. The majority of Cu-centered clusters are icosahedra, suggesting that the presence of Cu is benefit to promote the glass forming ability.
Development of an alternating integrator for magnetic measurements for experimental advanced superconducting tokamak
A high-performance integrator is one of the key electronic devices for reliably controlling plasma in the experimental advanced superconducting tokamak for long pulse operation. We once designed an integrator system of real-time drift compensation, which has a low integration drift. However, it is not feasible for really continuous operations due to capacitive leakage error and nonlinearity error. To solve the above-mentioned problems, this paper presents a new alternating integrator. In the new integrator, the integrator system of real-time drift compensation is adopted as one integral cell while two such integral cells work alternately. To achieve the alternate function, a Field Programmable Gate Array built in the digitizer is utilized. The performance test shows that the developed integrator with the integration time constant of 20 ms has a low integration drift (<15 mV) for 1000 s.
Competition between Superconductivity and Magnetic/Nematic Order as a Source of Anisotropic Superconducting Gap in Underdoped Ba1-xKxFe2As2
Explore the source record for details and available documents.
Molecular dynamics simulation studies of structural and dynamical properties of rapidly quenched Al
The structural and dynamical properties of rapidly quenched Al are studied by molecular dynamics simulations. The pair-correlation function of high temperature liquid Al agrees well with the experimental results. Different cooling rates are applied with high cooling rates leading to glass formation, while low cooling rates leading to crystallization. The local structures are characterized by Honeycutt–Andersen indices and Voronoi tessellation analysis. The results show that for high cooling rates, the local structures of the liquid and glassy Al are predominated by icosahedral clusters, together with considerable amount of face-centered cubic and hexagonal close packed short-range orders. These short-range order results are further confirmed using the recently developed atomic cluster alignment method. Moreover, the atomic cluster alignment clearly shows the crystal nucleation process in supercooled liquid of Al. Finally, the mean square displacement for the liquid is also analyzed, and the corresponding diffusion coefficient as a function of temperature is calculated.
Role of an ultra-thin AlN/GaN superlattice interlayer on the strain engineering of GaN films grown on Si(110) and Si(111) substrates by plasma-assisted molecular beam epitaxy
We investigate the role of an ultra-thin AlN/GaN superlattice interlayer (SL-IL) on the strain engineering of the GaN films grown on Si(110) and Si(111) substrates by plasma-assisted molecular beam epitaxy. It is found that micro-cracks limitted only at the SL-IL position are naturally generated. These micro-cracks play an important role in relaxing the tensile strain caused by the difference of the coefficient of thermal expansion between GaN and Si and keeping the residual strain in the crack-free GaN epilayers resulted from the SL-IL during the growth. The mechanism understanding of the strain modulation by the SL-IL in the GaN epilayers grown on Si substrates makes it possible to design new heterostructures of III-nitrides for optic and electronic device applications.
High-field critical current enhancement by irradiation induced correlated and random defects in (Ba{sub 0.6}K{sub 0.4})Fe{sub 2}As{sub 2}
Mixed pinning landscapes in superconductors are emerging as an effective strategy to achieve high critical currents in high, applied magnetic fields. Here, we use heavy-ion and proton irradiation to create correlated and point defects to explore the vortex pinning behavior of each and combined constituent defects in the iron-based superconductor Ba{sub 0.6}K{sub 0.4}Fe{sub 2}As{sub 2} and find that the pinning mechanisms are non-additive. The major effect of p-irradiation in mixed pinning landscapes is the generation of field-independent critical currents in very high fields. At 7 T ‖ c and 5 K, the critical current density exceeds 5 MA/cm{sup 2}.
Precipitation in a Cu–Cr–Zr–Mg alloy during aging
The precipitation processes in a Cu-0.69Cr-0.10Zr-0.02Mg alloy aged at 450 °C and 550 °C have been investigated by transmission electron microscopy and high resolution transmission electron microscopy. The precipitation sequence in this alloy aged at 450 °C is: supersaturated solid solution → Guinier–Preston zone (fcc Cr-rich phase) → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. The precipitation sequence in this alloy aged at 550 °C is: supersaturated solid solution → ordered fcc Cr-rich phase → ordered bcc Cr-rich phase. In the evolution of decomposition, the orientation relationship between the precipitates and the Cu matrix changes from cube-on-cube to Nishiyama–Wassermann orientation. The ordering of Cr-rich precipitates facilitates the formation of the bcc precipitates and promotes the development of Nishiyama–Wassermann orientation. - Highlights: • Two different precipitation sequences in the Cu–Cr–Zr–Mg alloy are proposed. • The changes in orientation relationship of the precipitates are presented. • The roles of ordering and coherent interface of the precipitates are discussed.
Effect of polarization on intersubband transition in AlGaN/GaN multiple quantum wells
Intersubband transitions (ISBT) of AlGaN/GaN multiple quantum wells (MQWs) with wavelength towards atmospheric window (3-5 {mu}m) have been investigated. A Ga-excess epitaxial method is used in the molecular beam epitaxy leading to ultra-sharp interface and negligible elements inter-diffusion. The absorption peak wavelength of the ISBT was successfully tuned in the range of 3-4 {mu}m by modifying the GaN well thickness from 2.8 to 5.5 nm. It was further found that the polarization charge density of the AlGaN/GaN MQWs was about -0.034 C/m{sup 2} which gave rise to blueshift of the ISBT wavelength and thus partially compensated its redshift with increasing well thickness.
Effect of heavy-ion irradiation on superconductivity in Ba{0.6}K{0.4}Fe{2}As{2}
Explore the source record for details and available documents.
High, magnetic field independent critical currents in (Ba,K)Fe 2 As 2 crystals
Explore the source record for details and available documents.
Vacancy-type defects in In{sub x}Ga{sub 1-x}N alloys probed using a monoenergetic positron beam
Native defects in In{sub x}Ga{sub 1-x}N grown by plasma-assisted molecular beam epitaxy were probed by a monoenergetic positron beam. Doppler broadening spectra of the annihilation radiation were measured, and these were compared with results obtained using first-principles calculation. The defect concentration increased with increasing In composition x and reached the maximum at x = 0.44{approx}0.56. A clear correlation between the line-width of photoluminescence and the defect concentration was obtained. The major defect species detected by positron annihilation was identified as cation vacancies coupled with multiple nitrogen vacancies (V{sub N}s), and their introduction mechanism is discussed in terms of the strain energy due to bond-length/angle distortions and the suppression of the V{sub N} formation energy by neighboring In atoms.
Microphysics in the Multi-Scale Modeling Systems with Unified Physics
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the microphysics developments of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the heavy precipitation processes will be presented.
Using Multi-Scale Modeling Systems and Satellite Data to Study the Precipitation Processes
In recent years, exponentially increasing computer power has extended Cloud Resolving Model (CRM) integrations from hours to months, the number of computational grid points from less than a thousand to close to ten million. Three-dimensional models are now more prevalent. Much attention is devoted to precipitating cloud systems where the crucial 1-km scales are resolved in horizontal domains as large as 10,000 km in two-dimensions, and 1,000 x 1,000 km2 in three-dimensions. Cloud resolving models now provide statistical information useful for developing more realistic physically based parameterizations for climate models and numerical weather prediction models. It is also expected that NWP and mesoscale model can be run in grid size similar to cloud resolving model through nesting technique. Recently, a multi-scale modeling system with unified physics was developed at NASA Goddard. It consists of (l) a cloud-resolving model (Goddard Cumulus Ensemble model, GCE model), (2) a regional scale model (a NASA unified weather research and forecast, WRF), (3) a coupled CRM and global model (Goddard Multi-scale Modeling Framework, MMF), and (4) a land modeling system. The same microphysical processes, long and short wave radiative transfer and land processes and the explicit cloud-radiation, and cloud-land surface interactive processes are applied in this multi-scale modeling system. This modeling system has been coupled with a multi-satellite simulator to use NASA high-resolution satellite data to identify the strengths and weaknesses of cloud and precipitation processes simulated by the model. In this talk, the recent developments and applications of the multi-scale modeling system will be presented. In particular, the results from using multi-scale modeling system to study the precipitating systems and hurricanes/typhoons will be presented. The high-resolution spatial and temporal visualization will be utilized to show the evolution of precipitation processes. Also how to use of the multi-satellite simulator tqimproy~ precipitation processes will be discussed.