Search NASA⌕ Search

Engineering topics

Shen, H.

Publications and source records attributed to Shen, H..

At least 19 records

Remote operation of the DIII-D National Fusion Facility

Abstract Full remote scientific operation of the DIII-D National Fusion Facility is now possible through significant advances in the computer science hardware and software infrastructure made over the last decade. Capabilities around information visualization, data movement, and communication have all been enhanced. The level of capability deployed to remotely operate DIII-D required an infrastructure advancement over what had previously been achieved in the fusion community. The large quantity of real-time data that is automatically displayed on DIII-D’s control room screens can now be visualized by remote participants via web-based applications. New audio/video solutions using the VoIP and instant messaging application Discord have been implemented to mimic the dynamic and ad-hoc scientific conversations that are critical in successfully operating an experimental campaign. Discord’s ability for a user to rapidly move between audio channels, text with images, and share screens is a significant enhancement over traditional videoconferencing tools. In addition, multiple combinations of broadcast audio are made available via a web-based application to allow remote participants to simultaneously listen to general announcements/sounds while conducting their own specific conversations. Secure methodologies have been put into place to allow remote control of hardware including DIII-D’s plasma control system application. Secure methods also included the ability of the on-site team to closely coordinate their work with remote team members which has been enhanced through extensions to the wireless network and the use of tablet computers for audio/video/screen sharing. However, no amount of software can fully replace the need for ‘hands on hardware.’ This infrastructure was severely stress tested during the COVID-19 pandemic where occupancy of the DIII-D control room was restricted. Operational efficiency during the pandemic, measured in discharges per hour, remained high (3.8 ± 0.8) compared to values obtained pre-pandemic (3.7 ± 0.8).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The physics basis to integrate an MHD stable, high-power hybrid scenario to a cool divertor for steady-state reactor operation

Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q 95 and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H 98y2 = 1.7, f GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Temperature dependence of structural, dynamical, and electronic properties of amorphous Bi 2 Te 3 : an ab initio study

Bismuth telluride (Bi 2 Te 3 ) has garnered significant interest in thermoelectric applications and three-dimensional topological insulators due to its unique electronic, transport, and thermal properties. Bi 2 Te 3 and Sb 2 Te 3 chalcogenide compounds have the same crystal structure. While Sb 2 Te 3 has been shown to be a prototypical phase change memory (PCM) compound along the pseudobinary tie-line of Ge-Sb-Te alloys, whether Bi 2 Te 3 can also exhibit PCM functionality is still not well established. In this work, a systematic study on the structural, dynamical, and electronic properties of amorphous Bi 2 Te 3 during the quenching process has been performed by using ab initio molecular dynamics simulations. Pair correlation function, coordination number, bond-angle distribution functions, and a novel atomistic cluster alignment method are used to explore the structural characteristics of Bi 2 Te 3 as a function of temperature. Our study shows that there are many distorted octahedral clusters in amorphous Bi 2 Te 3 . In comparison with the local structures in Sb 2 Te 3 , we found that the degree of distortion of the octahedrons in the Bi 2 Te 3 system is smaller than that in Sb 2 Te 3 system. Moreover, the changes in the dynamical properties of Bi 2 Te 3 from liquid to glassy state are also explored. The approximate range of liquid-to-glass transition temperature is determined to be between 673 and 723 K. The electronic properties of Bi2Te 3 and Sb 2 Te 3 are also analysed by density-of-states and Bader charge calculations, both of them in glass state are semiconductors. Our studies provide useful insights into the local structure and dynamical properties of Bi 2 Te 3 at the atomistic level during the fast cooling process, and suggest that the compound can be a candidate for PCM materials.

36 MATERIALS SCIENCE↗

Bergman-type medium range order in amorphous Zr77Rh23 alloy studied by ab initio molecular dynamics simulations

In recent years, some arguments about the existence of medium-range order (MRO) in the Zr-Rh system have been put forward. However, research on the structural features of the Zr-Rh binary alloy at the atomic level is still lacking. This study uses ab initio molecular dynamics simulations to systematically study the local structures of Zr77Rh23 from the liquid to the glassy states. Pair correlation function (PCF), coordination number (CN), Honeycutt–Anderson(HA) index, bond-angle distribution functions, and the Voronoi tessellation method are used to reveal a clear icosahedral-like configuration in the amorphous Zr77Rh23 alloy. It is noteworthy that the splitting in the second peak of the partial PDF implies the existence of a medium range order (MRO) in the Zr77Rh23 system. We obtain the local order in three-dimensional atomic density distributions by using a new atomistic cluster alignment (ACA) method. Interestingly, a Bergman-type MRO is observed in the glassy Zr77Rh23. Furthermore, the spatial distribution and connections of icosahedral-like clusters are shown to further demonstrate the MRO network. Our findings shed light on the nature of atomic local structures of amorphous Zr77Rh23 alloy and have important implications to understanding the formation of various MROs in metallic glasses.

Guo, Y. R.↗

Pressure induced short-range structural changes in supercooled liquid Ge 2 Sb 2 Te 5

Phase-change material such as Ge 2 Sb 2 Te 5 is usually utilized to store data due to the pronounced contrast in optical and electrical properties between crystalline and amorphous phases. As the density differs in the two phases, it is necessary to explore the influence of pressure on the structures of Ge 2 Sb 2 Te 5 , especially for the supercooled liquid which is an inevitable state in the formation of the two phases. The short-range structures in supercooled liquid Ge 2 Sb 2 Te 5 under compression have been investigated by using ab initio molecular dynamics simulation. The supercooled liquid eventually changes to a solid with an increase in pressure. During the process, tetrahedrons decrease slightly, revealing that tetrahedral structures are insensitive to the pressure. Octahedrons increase as the pressure is less than 3.7 GPa and then decrease, suggesting that a moderate pressure can promote the formation of octahedrons. The body-centered-cubic, face-centered-cubic and hexagonal closed-packed structures are observed at 9.9 GPa and then increase gradually. Additionally, it is noticed that Sb- and Te-centered clusters prefer Ge-centered clusters to forming the high-coordinated short-range structures during the compression process. Here our research makes us aware of the effects of pressure on short-range structures in supercooled liquid, which is of great importance in the application of phase-change materials.

36 MATERIALS SCIENCE↗

The local structural differences in amorphous Ge-Sb-Te alloys

Chalcogenide alloys in pseudobinary line between Sb 2 Te 3 and GeTe are extensively utilied in phase change memories for optical and electronic contrast between crystalline and amorphous phases. Different from the crystalline structure, the understanding of amorphous structures is still insufficient due to disorder and distortion. By employing first-principle molecular dynamics simulations and atomistic cluster alignment analysis, the short-range orders and the associated distortions of amorphous Sb 2 Te 3 , Ge 1 Sb 2 Te 4 , Ge 2 Sb 2 Te 5 , Ge 3 Sb 2 Te 6 and GeTe are investigated to explore the origin of nature difference. The results reveal that Gesingle bondGe and Sbsingle bondSb bonds present a notable competitive mechanism with GeTe content. The GeTe content has a great influence on Ge- and Te-centered short-range orders but little influence on the structures of Sb-centered clusters, especially for the octahedral sites and unidentified structures. The tetrahedrons in Ge-centered clusters of each alloy show a close proportion, but the fraction of tetrahedrons in total clusters increases with the increasing GeTe content due to the increase in the ratio of Ge atom. As for the distortions of clusters, the distorted tetrahedrons in Ge 2 Sb 2 Te 5 are closest to the standard tetrahedron, the Peierls distortion of Ge-centered 6-fold octahedron reduces with an increase in GeTe content whereas that of Sb-centered 6-fold octahedron shows a little change. Also, it is found that GeTe content can inhibit the formation of nanocavity but contribute to the formation of the odd rings. Our findings deepens the understanding of amorphous structures, which can promote the design and application of phase-change materials.

36 MATERIALS SCIENCE↗

Evolution of short- and medium-range order in the melt-quenching amorphization of Ge 2 Sb 2 Te 5

Phase-change memory takes advantage of the fast phase transition between amorphous and crystalline phases of phase-change materials (e.g.,Ge 2 Sb 2 Te 5 or GST). To date, while the “SET” process (crystallization of GST glass) has been intensively studied, studies on the “RESET” process (melt-quenching amorphization of GST) are still limited. Here, we explore the structural changes of GST upon rapid cooling by ab initio molecular dynamics simulations and atomistic cluster alignment (ACA) analysis. Different from other methods which only focus on the nearest bonding atoms, the ACA method can study both the short- and medium-range order clusters containing atoms beyond the first-neighboring shell and enables us to explore the changes of cluster structures in a larger scale. The results reveal that low-coordinated octahedral clusters tend to become high-coordinated ones, and Ge-centered octahedral structures change to tetrahedrons whereas Sb-centered tetrahedrons transform to octahedral structures during the amorphization process. Interestingly, tetrahedrons show aggregation in liquid and supercooled liquid in contrast to 6-fold octahedrons which present notable aggregation in amorphous GST. Furthermore, our study showed that wrong bonds (Ge–Ge, Sb–Sb, Ge–Sb and Te–Te bonds) can promote the formation of large rings, and irreducible rings tend to separate into smaller and larger rings as the temperature is decreased. Our conclusions provide useful insights into the formation process and the structure of amorphous GST, which is valuable for facilitating the application of phase change materials.

36 MATERIALS SCIENCE↗

A study of deformation and strain induced in bulk by the oxide layers formation on a Fe-Cr-Al alloy in high-temperature liquid Pb-Bi eutectic

At elevated temperatures, heavy liquid metals and their alloys are known to create a highly corrosive environment that causes irreversible degradation of most iron-based materials. In this paper, it has been found that an appropriate concentration of oxygen in the liquid alloy can significantly reduce this issue by creating a passivating oxide scale that controls diffusion, especially if Al is present in Fe-based materials (by Al-oxide formation). However, the increase of the temperature and of oxygen content in liquid phase leads to the increase of oxygen diffusion into bulk, and to promotion of the internal Al oxidation. This can cause a strain in bulk near the oxide layer, due either to mismatch between the thermal expansion coefficients of the oxides and bulk material, or to misfit of the crystal lattices (bulk vs. oxides). This work investigates the strain induced into proximal bulk of a Fe-Cr-Al alloy by oxide layers formation in liquid lead-bismuth eutectic utilizing synchrotron X-ray Laue microdiffraction. Finally, it is found that internal oxidation is the most likely cause for the strain in the metal rather than thermal expansion mismatch as a two-layer problem.

36 MATERIALS SCIENCE↗

Reliable self-powered highly spectrum-selective ZnO ultraviolet photodetectors

Ultraviolet photodetectors (PDs) have been fabricated from p-ZnO:(Li,N)/n-ZnO structures in this Letter. The PDs can operate without any external power supply and show response only to a very narrow spectrum range. The self-power character of the devices is due to the built-in electric field in the p-n junctions that can separate the photogenerated electrons and holes while the high spectrum-selectivity has been attributed to the filter effect of the neutral region in the ZnO:(Li,N) layer. The performance of the self-powered highly spectrum-selective PDs degrades little after five months, indicating their good reliability.

36 MATERIALS SCIENCE↗

Optimizing non-Pb radiation shielding materials using bilayers

Purpose: The objective of this study was to demonstrate that the weight of non-Pb radiation shielding materials can be minimized by structuring the material as a bilayer composed of different metal-powder-embedded elastomer layers. Methods: Measurements and Monte Carlo (MC) calculations were performed to study the attenuation properties of several non-Pb metal bilayers over the x-ray energy range 30-150 keV. Metals for the layers were chosen on the basis of low cost, nontoxicity, and complementary photoelectric absorption characteristics. The EGSnrc user code cavity.cpp was used to calculate the resultant x-ray fluence spectra after attenuation by these metal layers. Air kerma attenuation was measured using commercially manufactured metal/elastomer test layers. These layers were irradiated using the primary standard calibration beams at the Institute for National Measurement Standards in Ottawa, Canada utilizing the six x-ray beam qualities recommended in the German Standard DIN 6857. Both the measurements and the calculations were designed to approximate surface irradiation as well as penetrating radiation at 10 mm depth in soft tissue. The MC modeling point and the position of the measurement detector for surface irradiation were both directly against the downstream face of the attenuating material, as recommended in DIN 6857. Results: The low-Z upstream/high-Z downstream ordering of the metal bilayers provided substantially more attenuation than the reverse order. Optimal percentages of each metal in each bilayer were determined for each x-ray radiation beam quality. Conclusions: Depending on the x-ray quality, appropriate choices of two complementary metal-embedded elastomer layers can decrease the weight of radiation shielding garments by up to 25% compared to Pb-based elastomer garments while providing equivalent attenuation.

61 RADIATION PROTECTION AND DOSIMETRY↗

3D Finite Element Analysis of Particle-Reinforced Aluminum

Deformation in particle-reinforced aluminum has been simulated using three distinct types of finite element model: a three-dimensional repeating unit cell, a three-dimensional multi-particle model, and two-dimensional multi-particle models. The repeating unit cell model represents a fictitious periodic cubic array of particles. The 3D multi-particle (3D-MP) model represents randomly placed and oriented particles. The 2D generalized plane strain multi-particle models were obtained from planar sections through the 3D-MP model. These models were used to study the tensile macroscopic stress-strain response and the associated stress and strain distributions in an elastoplastic matrix. The results indicate that the 2D model having a particle area fraction equal to the particle representative volume fraction of the 3D models predicted the same macroscopic stress-strain response as the 3D models. However, there are fluctuations in the particle area fraction in a representative volume element. As expected, predictions from 2D models having different particle area fractions do not agree with predictions from 3D models. More importantly, it was found that the microscopic stress and strain distributions from the 2D models do not agree with those from the 3D-MP model. Specifically, the plastic strain distribution predicted by the 2D model is banded along lines inclined at 45 deg from the loading axis while the 3D model prediction is not. Additionally, the triaxial stress and maximum principal stress distributions predicted by 2D and 3D models do not agree. Thus, it appears necessary to use a multi-particle 3D model to accurately predict material responses that depend on local effects, such as strain-to-failure, fracture toughness, and fatigue life.

Shen, H.↗

Solutions of the benchmark problems by the dispersion-relation-preserving scheme

The 7-point stencil Dispersion-Relation-Preserving scheme of Tam and Webb is used to solve all the six categories of the CAA benchmark problems. The purpose is to show that the scheme is capable of solving linear, as well as nonlinear aeroacoustics problems accurately. Nonlinearities, inevitably, lead to the generation of spurious short wave length numerical waves. Often, these spurious waves would overwhelm the entire numerical solution. In this work, the spurious waves are removed by the addition of artificial selective damping terms to the discretized equations. Category 3 problems are for testing radiation and outflow boundary conditions. In solving these problems, the radiation and outflow boundary conditions of Tam and Webb are used. These conditions are derived from the asymptotic solutions of the linearized Euler equations. Category 4 problems involved solid walls. Here, the wall boundary conditions for high-order schemes of Tam and Dong are employed. These conditions require the use of one ghost value per boundary point per physical boundary condition. In the second problem of this category, the governing equations, when written in cylindrical coordinates, are singular along the axis of the radial coordinate. The proper boundary conditions at the axis are derived by applying the limiting process of r approaches 0 to the governing equations. The Category 5 problem deals with the numerical noise issue. In the present approach, the time-independent mean flow solution is computed first. Once the residual drops to the machine noise level, the incident sound wave is turned on gradually. The solution is marched in time until a time-periodic state is reached. No exact solution is known for the Category 6 problem. Because of this, the problem is formulated in two totally different ways, first as a scattering problem then as a direct simulation problem. There is good agreement between the two numerical solutions. This offers confidence in the computed results. Both formulations are solved as initial value problems. As such, no Kutta condition is required at the trailing edge of the airfoil.

Tam, Christopher K. W.↗