Search NASA⌕ Search

Engineering topics

Shen, Lening

Publications and source records attributed to Shen, Lening.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Unraveling the Combined Photothermal Stability of Common Perovskite Solar Cell Compositions

In halide perovskite solar cells, certain compositions, especially those with a high mixture of anions, degrade rapidly. Here, in this study, a degradation study compares the photo (exposure to light), thermal (exposure to elevated temperatures), and photo-plus-thermal (combination) stability of three representative perovskite compositions chosen for their relatively high performance and to independently test anion versus cation effects. Based upon experience and reports, the compositions studied are triple cation with a high Br ratio (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.5 Br 0.5 ) 3 ), all iodide with a moderately high Cs ratio (FA 0.8 Cs 0.2 PbI 3 ), and FA-dominated triple cation (Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 ). Cs 0.05 (FA 0.98 MA 0.02 ) 0.95 Pb(I 0.98 Br 0.02 ) 3 displayed the best combined photo-plus-thermal stability. Degradation mechanisms were investigated by comparing the morphology, surface composition, and bulk and interface carrier dynamics. Under the harshest aging conditions (photo-plus-thermal), phase segregation and vaporization of organic cations occurred, along with the appearance of high-energy states indicating the interaction with C 60 . The findings were verified on perovskite films blade-coated in air used in devices (FTO/NiOx/SAM/Perovskite/C 60 /BCP/Cu), achieving an efficiency of 21.9% alongside correlated stability.

14 SOLAR ENERGY↗
DOE OSTI2023

Efficient and stable perovskite solar cells based on blade-coated CH 3 NH 3 PbI 3 thin films fabricated using “green” solvents under ambient conditions

Metal halide perovskites are considered the most promising candidates for solar cells of the decade due to their exceptional optical and electronic properties. The power conversion efficiency of metal halide perovskites, when incorporated as the active layer of solar cells, has become comparable to that observed for conventional silicon solar cells. However, the stability, scaleup, green solvent usage, and fabrication in ambient conditions of metal halide perovskites need to be solved for commercial applications. Here, in this work, we report the fabrication of blade-coated methylammonium lead iodide (MAPbI 3 ) perovskite thin films using methylamine and acetonitrile as “green” solvents under ambient conditions. Our perovskite films are initially prepared from low purity PbI2 (99%) and are blade-coated in dry air at relative humidity (RH) levels above 30%. A significant advantage of fabricating our perovskite thin films via blade-coating protocols is that there is a minimal amount of precursors (5 μL) used compared to spin-coating methods (50μL–60μL) for a 4 cm 2 substrate. With the addition of a small amount of an organic halide salt, namely, phenethylammonium chloride, the film crystallinity is improved and non-radiative recombination is suppressed, resulting in power conversion efficiencies over 20%. In addition, the device maintains more than 95% of its initial efficiency after 500 h under continuous light illumination of 1-sun at open circuit conditions, 50 °C and 60% RH. The above method leads a path towards the commercial fabrication of perovskite solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Blade Coating Inverted Perovskite Solar Cells with Vacuum-Assisted Nucleation Based on Bottom Quasi-2D Passivation

Metal halide perovskite solar cells (PSCs) attract an enormous attention because of their high power conversion efficiency (PCE) and low fabrication cost. However, their commercialization is limited by fabricating highly efficient large-area solar cells. Controlling the morphology and crystallization of perovskite for large-area fabrication is difficult but important. Here, in this work, a vacuum-assisted approach is developed to obtain mirror-like, pinhole-free, highly crystalline, and uniform blade-coated perovskite films, without the use of antisolvent and air knife. This method can be a universal approach for various perovskite compositions. Meanwhile, the phenethylammonium iodide passivation effect at the top and bottom interfaces of perovskite layer based on FTO/NiO x /perovskite/C 60 /BCP/Cu inverted p-i-n structure is systematically investigated. The optimized device fabricated by blade coating under an ambient environment exhibits the champion PCE of 20.7% and is among the top few records of blade coating inverted structure based on NiOx hole transport layer. The encapsulated device retains 97% of its maximum efficiency under open-circuit condition after 1000 h of photostability test in an ambient environment at room temperature with a relative humidity of 40–60%. Herein, low-cost, easy, and reproducible strategies to fabricate efficient and stable blade-coated PSCs are demonstrated.

14 SOLAR ENERGY↗
DOE OSTI2021

A negative piezo-conductive effect from doped semiconducting polymer thin films

In the past years, piezo-conductive sensors have drawn great attention in both academic and industrial sectors. The piezo-conductive sensors made by inorganic semiconductors exhibited poor mechanical flexibility, restricting their further practical applications. In this study, we report the piezo-conductive sensors by a semiconducting polymer, poly(3,4-ethylenedioxythiophene) doped with tosylate ions (PEDOT:Tos) thin films. Systemically studies indicate that the piezo-conductive response of the PEDOT:Tos thin films is originated from the deformation of the PEDOT crystal cells and the stretched π–π distances induced by Tos. Moreover, the negative piezo-conductive effect, for the first time, is observed from PEDOT:Tos thin film under the pressure. A working mechanism is further proposed to interpret the transient from a positive to a negative piezo-conductive response within the PEDOT:Tos thin films. Our studies offer a facile route to approach effective piezo-conductive sensors based on conjugated polymers.

36 MATERIALS SCIENCE↗