Search NASA⌕ Search

Engineering topics

Shi, Fan

Publications and source records attributed to Shi, Fan.

47 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Permeability evolution of reservoir rocks interacting with CO2/brine under CO2 sequestration conditions

The Mount Simon formation in the Midwest region of the U.S. is considered as a potential candidate host reservoir for carbon storage. Obtaining knowledge of possible geochemically induced changes to the permeability and porosity of host CO2 storage sandstone will enable us to gain a deeper insight of the long-term reservoir behavior under the CO2 storage conditions. An experimental study of the interaction of CO2/brine/rock on saline formations in a static system under CO2 storage conditions was conducted.

Soong, Yee↗
DOE OSTI2020

Regenerable non-aqueous basic immobilized amine slurries for removal of CO2 from a gaseous mixture and a method of use thereof

The disclosure provides a composition for the separation of CO2 from a gaseous mixture and a method of use thereof. The composition comprises solid Basic Immobilized Amine Sorbents (BIAS) suspended in silicone oil. The method of use comprises contacting the gaseous mixture with a sorbent slurry comprising Basic Immobilized Amine Sorbents (BIAS) and silicone oil to at least partially absorb the CO2 from the gaseous mixture, and regenerating the BIAS slurry by causing desorption of the CO2.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Contact Angle Measurements Using Sessile Drop and Micro-CT Data from Six Sandstones

Numerous sessile drop and micro-computed tomography (micro-CT) studies have been conducted to quantify Geologic Carbon Storage formation wettability by measuring static contact angles (θ); however, the influence of pore geometry remains unknown. In this work, six sandstones (Bandera Brown, Berea, Bentheimer, Mt. Simon, Navajo, and Nugget) are used to measure θ using the two aforementioned experimental methods at identical testing conditions (45°C and 12.41 MPa). The range of θ measured at in situ conditions (micro-CT) exceeds those the range at ex situ (sessile drop method) conditions for all sandstones. However, when droplets with more representative in situ diameters are analyzed, θ averages show ex situ θ exceed those of in situ θ. Pore geometry does influence local θ, but the size of ex situ droplets relative to pore size appears to influence θ. This is an important to consider for future sessile drop studies used for analysis of CO 2 behavior in carbon storage reservoirs.

36 MATERIALS SCIENCE↗
DOE OSTI2020

CO 2 –Brine Contact Angle Measurements on Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon Sandstones

In this study, contact angles were measured for CO 2 bubbles on six different sandstones (Navajo, Nugget, Bentheimer, Bandera Brown, Berea, and Mt. Simon) that could potentially represent properties of CO 2 storage depositional environments. The impacts of pressure and temperature were studied by focusing on the CO 2 phase behavior in three different scenarios: gaseous, liquid, and supercritical conditions. Despite controlling the sample preparation and cleanliness, CO 2 -brine equilibration conditions, and pressure and temperature, there were inconsistencies in contact angle trends that could largely be attributed to natural sample heterogeneity resulting from localized variations in topography, surface roughness, and mineral composition across the surface. Despite these variations, the analysis of 298 measurements from this study showed that 81% of the contact angles were below 40° representing strongly water-wet to (moderately) water-wet behaviors. Also, 17.3% of the measurements were between 40° and 60° (weakly water-wet) and primarily belonged to small CO 2 bubbles (< 500 μm) that were heavily impacted by localized surface heterogeneity in natural sandstone samples. Additionally, only 1.7% of the measurements had angles greater than 60° and could be classified as CO 2 -wet behavior, but these measurements occurred on extremely small bubbles (100-200 μm) that were very dependent on localized surface heterogeneity. While some of the detailed physics of the CO 2 -brine-sandstone interface is still poorly understood, from an application standpoint, the sandstones of this study were best characterized as strongly water-wet to (moderately) water-wet.

03 NATURAL GAS↗