Qubits on programmable geometries with a trapped-ion quantum processor
Not Available
Wu, Qiming (ORCID:0000000326588132)↗
Engineering topics
Shi, Yue
Publications and source records attributed to Shi, Yue.
Linking leaf dark respiration to leaf traits and reflectance spectroscopy across diverse forest types
Leaf dark respiration (R dark ), an important yet rarely quantified component of carbon cycling in forest ecosystems, is often simulated from leaf traits such as the maximum carboxylation capacity (V cmax ), leaf mass per area (LMA), nitrogen (N) and phosphorus (P) concentrations, in terrestrial biosphere models. However, the validity of these relationships across forest types remains to be thoroughly assessed. Here, in this study, we analyzed R dark variability and its associations with V cmax and other leaf traits across three temperate, subtropical and tropical forests in China, evaluating the effectiveness of leaf spectroscopy as a superior monitoring alternative. We found that leaf magnesium and calcium concentrations were more significant in explaining cross-site R dark than commonly used traits like LMA, N and P concentrations, but univariate trait–R dark relationships were always weak (r 2 ≤ 0.15) and forest-specific. Although multivariate relationships of leaf traits improved the model performance, leaf spectroscopy outperformed trait–R dark relationships, accurately predicted cross-site R dark (r 2 = 0.65) and pinpointed the factors contributing to R dark variability. Our findings reveal a few novel traits with greater cross-site scalability regarding R dark , challenging the use of empirical trait–R dark relationships in process models and emphasize the potential of leaf spectroscopy as a promising alternative for estimating R dark , which could ultimately improve process modeling of terrestrial plant respiration.
59 BASIC BIOLOGICAL SCIENCES↗
Probing the van Hove singularity of the kagome metal YV 6 Sn 6 through quantum oscillations
Kagome metals with the Fermi energy tuned near the van Hove singularities (vHss) have shown to host exotic phases including unconventional superconductivity and a chiral flux phase arising from a charge density wave. However, most quantum oscillations studies of the electronic structure of kagome metals focus on compounds which electronically or magnetically order, obscuring the unperturbed vHs. Here we present quantum oscillation measurements of YV 6 Sn 6 which contains a pristine kagome lattice free from long-range order. We discovered quantum oscillations corresponding to a large orbit (≈70% of the Brillouin Zone area) with the heaviest mass ever observed in vanadium-based kagome metals (≈3.3m e ), consistent with a Fermi pocket whose Fermi level is near the vHs. Comparing with first-principle calculations suggests that the effective mass of this pocket is highly sensitive to the position of Fermi level. Finally, our study establishes the enhanced density of states associated with a vHs in a kagome metal, allowing further insight into a potential driving mechanism for the unconventional electronic orderings in this class of materials.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
The TDHF code Sky3D version 1.2
The Sky3D code has been widely used to describe nuclear ground states, collective vibrational excitations, and heavy-ion collisions. The approach is based on Skyrme forces or related energy density functionals. The static and dynamic equations are solved on a three-dimensional grid, and pairing is been implemented in the BCS approximation. This updated version of the code aims to facilitate the calculation of nuclear strength functions in the regime of linear response theory, while retaining all existing functionality and use cases. The strength functions are benchmarked against available RPA codes, and the user has the freedom of choice when selecting the nature of external excitation (from monopole to hexadecapole and more). Some utility programs are also provided that calculate the strength function from the time-dependent output of the dynamic calculations of the Sky3D code.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Spectral evidence for local-moment ferromagnetism in the van der Waals metals $\mathrm{Fe_3GaTe_2}$ and $\mathrm{Fe_3GeTe_2}$
Magnetism in two-dimensional (2D) materials has attracted considerable attention recently for both fundamental understanding of magnetism and its tunability towards device applications. The isostructural Fe 3 GeTe 2 and Fe 3 GaTe 2 are two members of the Fe-based van der Waals (vdW) ferromagnet family, but exhibit very different Curie temperatures (T C ) of 210 and 360 K, respectively. In this report by using angle-resolved photoemission spectroscopy and density functional theory, we systematically compare the electronic structures of the two compounds. Qualitative similarities in the Fermi surface can be found between the two compounds, with expanded hole pockets in Fe 3 GaTe 2 suggesting additional hole carriers compared to Fe 3 GeTe 2 . Interestingly, we observe almost no band shift in Fe 3 GaTe 2 across its T C of 360 K, compared to a small shift in Fe 3 GeTe 2 across its T C of 210 K. The weak temperature-dependent evolution strongly deviates from the expectations of an itinerant Stoner mechanism. Our results suggest that itinerant electrons have minimal contributions to the enhancement of T C in Fe 3 GaTe 2 compared to Fe 3 GeTe 2 , and that the nature of ferromagnetism in these Fe-based vdW ferromagnets must be understood with considerations of the electron correlations.
36 MATERIALS SCIENCE↗
Absence of Weyl nodes in EuCd 2 As 2 revealed by the carrier density dependence of the anomalous Hall effect
Not provided.
Materials Science↗
Non-Fermi liquid behaviour in a correlated flat-band pyrochlore lattice
Electronic correlation effects are manifested in quantum materials when either the on-site Coulomb repulsion is large or the electron kinetic energy is small. The former is the dominant effect in cuprate superconductors and heavy-fermion systems whereas it is the latter in twisted bilayer graphene and geometrically frustrated metals. However, the simultaneous cooperation of both effects in the same quantum material remains rare. The design aim is to produce correlated topological flat bands pinned at the Fermi level. Here, we observe a flat band at the Fermi level in a 3d pyrochlore metal CuV 2 S 4 . Our angle-resolved photoemission spectroscopy data reveal that destructive quantum interference associated with the V pyrochlore sublattice and further renormalization to the Fermi level by electron interactions induce this flat band. Consequently, we discover transport signatures that evidence a deviation from Fermi liquid behaviour as well as an enhanced Sommerfeld coefficient. Our work illustrates the combined cooperation of local Coulomb interactions and geometric frustration in a pyrochlore lattice system to induce correlated topology by constructing and pinning correlated flat bands near the Fermi level.
36 MATERIALS SCIENCE↗
Strain-switchable field-induced superconductivity
Field-induced superconductivity is a rare phenomenon where an applied magnetic field enhances or induces superconductivity. Here, we use applied stress as a control switch between a field-tunable superconducting state and a robust non–field-tunable state. This marks the first demonstration of a strain-tunable superconducting spin valve with infinite magnetoresistance. We combine tunable uniaxial stress and applied magnetic field on the ferromagnetic superconductor Eu(Fe 0.88 Co 0.12 ) 2 As 2 to shift the field-induced zero-resistance temperature between 4 K and a record-high value of 10 K. We use x-ray diffraction and spectroscopy measurements under stress and field to reveal that strain tuning of the nematic order and field tuning of the ferromagnetism act as independent control parameters of the superconductivity. Combining comprehensive measurements with DFT calculations, we propose that field-induced superconductivity arises from a novel mechanism, namely, the uniquely dominant effect of the Eu dipolar field when the exchange field splitting is nearly zero.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
A Reference Implementation for a Quantum Message Passing Interface
Practical applications of quantum computing are currently limited by the number of qubits that can be set with reasonable fidelities for each system. Therefore, a distributed quantum computing system with multiple quantum computers coherently connected is highly demanding. To realize the internode communication of quantum information, the software interface, Quantum Message Passing Interface (QMPI), leveraging the framework built for classical MPI but taking advantage of quantum teleportation to communicate between different quantum nodes was proposed. In this project, we develop the QMPI with point-to-point and collective operations in Qiskit and characterize its performance by demonstrating the application implementations. Moreover, we developed a new technique for optimizing collective communication of the distributed quantum programs with Multi-Controlled Toffoli gates. This technique beats the state-of-the-art in terms of fidelity and the number of remote EPR pairs consumed in both simulations and experiments.
Shi, Yue↗
Wettability Alteration with Weak Acid-Assisted Surfactant Flood
Oil-wetness and heterogeneity are two key reasons for low oil recovery by waterflooding in carbonate reservoirs. Surfactants have been effective in altering the oil-wet matrix to a more water-wet condition and initiating spontaneous imbibition. Because it takes time for the surfactant to alter wettability, oil recovery from the tight matrix is slow and sometimes not economically feasible. Acids have the potential of dissolving minerals, which may alter wettability. In this study, the enhanced oil recovery (EOR) performance of an acid-assisted surfactant solution, a novel technique, was evaluated for low-temperature applications. A set of acids and their acetates were tested. Bulk rock-acid reaction, wettability alteration (WA) tests, and spontaneous imbibition measurements were conducted at reservoir temperature (35°C) to identify effective candidates. Coreflood tests were then performed to evaluate the selected acid-surfactant formulations. Before and after a coreflood test, the core was scanned using micro-computed tomography (CT) to investigate pore structure alteration. Bulk reaction measurements showed that weak acids, especially acetic acid (AA), have the desired low reaction rates at 35°C. WA tests showed that AA can remove the crude oil off the rock surface and alter wettability through mineral dissolution. The surfactant can reduce contact angles from 160° to 58°; adding acid into the surfactant can further reduce it to 52°. Spontaneous imbibition experiments showed the synergy between the acid and the surfactant; the AA-surfactant solution had the highest oil recovery (62.6%) among acid-surfactant formulations. The acid improves the WA efficiency by the surfactant through surface mineral dissolution and lower ζ-potential. The imbibition transports the acid-surfactant solutions into the matrix, which minimizes face dissolution. Coreflood tests show that the AA-surfactant flood can increase the oil recovery rate and recover about 8% more oil compared to the surfactant flood. Micro-CT showed that a few mineral particles were transported along the core and partially plugged pore throats, which reduced permeability and diverted flow leading to improved oil recovery. Here, the transport of the acid in reservoirs and the potential plugging issues have to be carefully evaluated in future studies.
58 GEOSCIENCES↗
Nematic fluctuations in an orbital selective superconductor Fe 1+ y Te 1– x Se x
Fe 1+y Te 1–x Se x is characterized by its complex magnetic phase diagram and highly orbital-dependent band renormalization. Despite this, the behavior of nematicity and nematic fluctuations, especially for high tellurium concentrations, remains largely unknown. Here we present a study of both B 1 g and B 2 g nematic fluctuations in Fe 1+y Te 1–x Se x (0 ≤ x ≤ 0.53) using the technique of elastoresistivity measurement. We discovered that the nematic fluctuations in two symmetry channels are closely linked to the corresponding spin fluctuations, confirming the intertwined nature of these two degrees of freedom. We also revealed an unusual temperature dependence of the nematic susceptibility, which we attributed to a loss of coherence of the d xy orbital. Our results highlight the importance of orbital differentiation on the nematic properties of iron-based materials.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Spin structure and dynamics of the topological semimetal Co 3 Sn 2-x In x S 2
The anomalous Hall effect (AHE), typically observed in ferromagnetic (FM) metals with broken time-reversal symmetry, depends on electronic and magnetic properties. In Co 3 Sn 2-x In x S 2 , a giant AHE has been attributed to Berry curvature associated with the FM Weyl semimetal phase, yet recent studies report complicated magnetism. We use neutron scattering to determine the spin dynamics and structures as a function of x and provide a microscopic understanding of the AHE and magnetism interplay. Spin gap and stiffness indicate a contribution from Weyl fermions consistent with the AHE. The magnetic structure evolves from c-axis ferromagnetism at x = 0 to a canted antiferromagnetic (AFM) structure with reduced c-axis moment and in-plane AFM order at x = 0.12 and further reduced c-axis FM moment at x = 0.3. Since noncollinear spins can induce non-zero Berry curvature in real space acting as a fictitious magnetic field, our results revealed another AHE contribution, establishing the impact of magnetism on transport.
36 MATERIALS SCIENCE↗
Effect of a nanoparticle on wettability alteration and wettability retainment of carbonate reservoirs
The oil recovery in many carbonate reservoirs is low due to oil-wetness and heterogeneity. In this study, nanoparticles are evaluated for altering the wettability of oil-wet limestones and their properties are compared with those of an anionic surfactant. A surface-modified silica nanoparticle (SiNP) with a negative zeta potential was found to be aqueous stable in brines. Wettability studies showed that the SiNP cannot change the wettability of an initially oil-wet calcite plate, but SiNP treated calcite surface can remain water-wet after aging in oil. Spontaneous imbibition tests confirmed the observations of wettability tests and showed that a SiNP treated carbonate core retained its water-wettability during oil injection and aging. The imbibition into a SiNP treated and oil aged core was comparable to that in a water-wet core. However, SiNP was not able to remove the oil layers in initially oil-wet cores and imbibe water into these cores. In contrast, the anionic surfactant could alter the oil-wet carbonate rocks to a more water-wet condition, but failed to prevent the water-wet surface from getting oil-wet during oil-aging. The results suggest that the SiNP can be injected into wettability-altered (water-wet) reservoirs/regions to help retain the water-wettability during the long-term oil production. The 0.5 wt% SiNP dispersions transported through 18 mD limestone cores without any plugging. The SiNP retention was measured to be 2.5 mg/m 2 , much higher than that of the anionic surfactant.
02 PETROLEUM↗
Coreflood Tests to Evaluate Enhanced Oil Recovery Potential of Wettability-Altering Surfactants for Oil-Wet Heterogeneous Carbonate Reservoirs
Summary Oil-wetness and heterogeneity are two main factors that result in low oil recovery (OR) by waterflood in carbonate reservoirs. The injected water is likely to flow through high-permeability regions and bypass the oil in the low-permeability matrix. In this study, systematic coreflood tests were carried out in both “homogeneous” cores and “heterogeneous” cores with a wettability-altering surfactant. The homogeneous coreflood tests were conducted to evaluate surfactant retention, as well as to compare tertiary surfactant flooding with secondary surfactant flooding. The heterogeneous coreflood test was proposed to model bypassing in low-permeability matrix during waterfloods, and dynamic imbibition of surfactant into the low-permeability matrix. Surfactant retention results suggest that retention increases as initial oil saturation decreases. The retention of selected surfactant in the target reservoir cores was measured to be within a range of 0.07–0.12 mg/g-rock, which is economically acceptable. The results of homogeneous coreflood tests showed that both secondary waterflood and secondary surfactant flood can achieve high OR (>50%) from relatively homogeneous oil-wet cores. A shut-in phase after the surfactant injection resulted in a surge in oil production, which suggests that enough time should be given for wettability alteration by surfactants. The results of heterogeneous coreflood tests showed that more oil is bypassed in the tighter matrix by waterflood if the permeability is higher in the flooded layer and this bypassed oil is the target for the wettability-altering surfactant floods. Slow wettability-altering surfactant injection leads to imbibition into bypassed regions. When the oil-wet carbonate reservoirs have large unswept regions after waterflood, wettability-altering surfactants can significantly improve OR if enough time is given for imbibition.
Engineering↗
Strongly anisotropic antiferromagnetic coupling in EuFe 2 As 2 revealed by stress detwinning
Of all parent compounds of iron-based high-temperature superconductors, EuFe 2 As 2 exhibits by far the largest magnetostructural coupling due to the sizable biquadratic interaction between Eu and Fe moments. While the coupling between Eu antiferromagnetic order and Fe structural/antiferromagnetic domains enables rapid field detwinning, this prevents simple magnetometry measurements from extracting the critical fields of the Eu metamagnetic transitions. Furthermore we measure these critical fields by combining x-ray magnetic circular dichroism spectroscopy with in-situ tunable uniaxial stress and applied magnetic field. The combination of two tuning knobs allows us to separate the stressdetwinning of structural domains from the field-induced reorientation of Eu moments. Intriguingly, from the critical field values we find that the Eu interplanar interaction is strongly anisotropic. We argue that this anisotropic exchange term is likely a consequence of the strong anisotropy in the magnetically ordered Fe layer, which highlights the non-trivial interplay between Eu-Fe magnetism in this system.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Adaptively controlled fast production of defect-free beryllium ion crystals using pulsed laser ablation
Trapped atomic ions find wide applications ranging from precision measurement to quantum information science and quantum computing. Beryllium ions are widely used due to the light mass and convenient atomic structure of beryllium; however, conventional ion loading from thermal ovens exerts undesirable gas loads for a prolonged duration. Here, we demonstrate a method to rapidly produce pure linear chains of beryllium ions with pulsed laser ablation, serving as a starting point for large-scale quantum information processing. Our method is fast compared to thermal ovens, reduces the gas load to only 10 -12 Torr (10 -10 Pa) level, yields a short recovery time of a few seconds, and also eliminates the need for a deep ultraviolet laser for photoionization. We also study the loading dynamics, which show non-Poissonian statistics in the presence of sympathetic cooling. In addition, we apply feedback control to obtain defect-free ion chains with desirable lengths.
47 OTHER INSTRUMENTATION↗
Quantum oscillations in the field-induced ferromagnetic state of MnBi 2-x Sb x Te 4
The intrinsic antiferromagnetic topological insulator MnBi2Te4 undergoes a metamagnetic transition in a c-axis magnetic field. It has been predicted that ferromagnetic MnBi2Te4 is an ideal Weyl semimetal with a single pair of Weyl nodes. Here we report measurements of quantum oscillations detected in the field-induced ferromagnetic phase of MnBi 2-x Sb x Te 4 , where Sb substitution tunes the majority carriers from electrons to holes. Single-frequency Shubnikov–de Haas oscillations were observed in a wide range of Sb concentrations (0.54≤x≤1.21). The evolution of the oscillation frequency and the effective mass shows reasonable agreement with the Weyl semimetal band structure of ferromagnetic MnBi 2 Te 4 predicted by density functional calculations. Intriguingly, the quantum oscillation frequency shows a strong temperature dependence, indicating that the electronic structure depends sensitively on magnetism.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Surfactant-Aided Low-Salinity Waterflooding for Low-Temperature Carbonate Reservoirs
Carbonate reservoirs tend to be oil-wet/mixed-wet and heterogeneous because of mineralogy and diagenesis. The objective of this study is to improve oil recovery in low-temperature dolomite reservoirs using low-salinity and surfactant-aided spontaneous imbibition. The low-salinity brine composition was optimized using ζ-potential measurements, contact-angle (CA) experiments, and a novel wettability-alteration measure. Significant wettability alteration was observed on dolomite rocks at a salinity of 2,500 ppm. We evaluated 37 surfactants by performing CA, interfacial-tension (IFT), and spontaneous-imbibition experiments. Here, three (quaternary ammonium) cationic and one (sulfonate) anionic surfactants showed significant wettability alteration and produced 43–63% of original oil in place (OOIP) by spontaneous imbibition. At a low temperature (35°C), oil recovery by low-salinity effect is small compared with that by wettability-altering surfactants. Coreflood tests were performed with a selected low-salinity cationic surfactant solution. A novel coreflood was proposed that modeled heterogeneity and dynamic imbibition into low-permeability regions. The results of the “heterogeneous” coreflood were consistent with that of spontaneous-imbibition tests. These experiments demonstrated that a combination of low-salinity brine and surfactants can make originally oil-wet dolomite rocks more water-wet and improve oil recovery from regions bypassed by waterflood at a low temperature of 35°C.
02 PETROLEUM↗