Search NASA⌕ Search

Engineering topics

Shlichta, Paul J.

Publications and source records attributed to Shlichta, Paul J..

17 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Measuring Electrical Resistivity Of Compacted Powder

Slightly modified micrometer used in conjunction with special cup to measure electrical resistance of specimen of powder as function of packing fraction. Powder pressed between anvils of micrometer, which make electrical contact with specimen. Device used in manufacturing batteries to determine effective electrical conductivities of powders loaded into plastic sheets to make battery substrates. Coupled with good mathematical description of expected conductivity of particulate composite as function of packing density. Also serves as tool for evaluating conductivity of dispersed phase, as well as evaluating electrical resistances of interparticle contacts.

Shlichta, Paul J.↗
NASA NTRS1991

Sealing Out-Of-Round Tubes With O-Rings

Glass or ceramic tubes out-of-round sealed effectively by ordinary O-rings in caps of modified hydraulic fittings. In typical connection, O-ring squeezed between two surfaces having inward-opening slants of 5 degrees or 10 degrees. Slanted surfaces force ring inward, compressing it around tube. Connector metal fitting, tightened by hand around O-ring, seals O-ring against tube as much as 1/16 in. out of round. Modified connectors seal glass or ceramic tubes against gas or vacuum leakage in furnaces, vacuum systems, and tubes for glassblowing equipment.

Shlichta, Paul J.↗
NASA NTRS1991

Electrostatic Stabilization Of Growing Protein Crystals

Proposed technique produces large crystals in compact, economical apparatus. Report presents concept for supporting protein crystals during growth in microgravity. Yields crystals larger and more-nearly perfect than those grown on Earth. Combines best features of sandwich-drop and electrostatic-levitation methods of support. Drop of protein solution inserted between pair of glass or plastic plates, as in sandwich-drop-support method. Electrostatically charged ring confines drop laterally and shapes it, as in electrostatic technique. Apparatus also made to accommodate several drops simultaneously between same pair of supporting plates. Drops can be inserted and crystals removed through ducts in plates.

Shlichta, Paul J.↗
NASA NTRS1990

Simple Regulator For Positive-Pressure Glove Box

Weighted, inflated bag regulates pressure in positive-pressure glove box such as those used to manipulate samples in atmosphere isolated from such contaminations in open air as moisture or oxygen. Weight atop the inflated bag rises and falls as gas flows into and out of bag from glove box. Positive pressure relative to surroundings pushes gloves outward when not being used. To manipulate items in box, technician forces gloves inside. Sensitive materials manipulated in dry or inert atmosphere without danger of overpressure when technician inserts hands in gloves, or of underpressure - and inward leakage of air - when technician draws hands out of gloves. Replaces elaborate system of pressure-activated valves. Quieter, cheaper, and more reliable.

Shlichta, Paul J.↗
NASA NTRS1990

Antireduction Insulator For Solid-Electrolyte Cell

Depletion of oxygen from electrolyte prevented. Proposed to add layer of electrical insulation between solid electrolyte and portion of porous negative electrode under negative metal contact in solid-electrolyte cell. Helps maintain efficiency of cell by preventing "shadow" effect degrading portion of electrolyte under negative contact and sometimes near seals.

Shlichta, Paul J.↗
NASA NTRS1990

Ballast system for maintaining constant pressure in a glove box

A ballast system for a glove box including a fixed platform on which is mounted an inflatable bag on top of which resides a cover and a weight. The variable gas volume of the inflatable bag communicates with that of the glove box via a valved tube. The weight and gas volume are selected to maintain a relatively constant pressure in the glove box despite variations in the glove box volume while avoiding the use of complicated valving apparatus.

Shlichta, Paul J.↗
NASA NTRS1989

Ballast system for maintaining constant pressure in a glove box

A ballast system is disclosed for a glove box including a fixed platform on which is mounted an inflatable bag on top of which resides a cover and a weight. The variable gas volume of the inflatable bag communicates with that of the glove box via a valved tube. The weight and the gas volume are selected to maintain a relatively constant pressure in the glove box despite variations in the glove box volume while avoiding the use of complicated valving apparatus.

Shlichta, Paul J.↗
NASA NTRS1989

Surrogate Seeds For Growth Of Crystals

Larger crystals of higher quality grown. Alternative method for starting growth of crystal involves use of seed crystal of different material instead of same material as solution. Intended for growing single-crystal proteins for experiments but applicable in general to growth of crystals from solutions and to growth of semiconductor or other crystals from melts.

Shlichta, Paul J.↗
NASA NTRS1989

Using Inorganic Crystals To Grow Protein Crystals

Solid materials serve as nucleating agents. Protein crystals induced by heterogeneous nucleation and in some cases by epitaxy to grow at lower supersaturations than needed for spontaneous nucleation. Heterogeneous nucleation makes possible to grow large, defect-free single crystals of protein more readily. Such protein crystals benefits research in biochemistry and pharmacology.

Shlichta, Paul J.↗
NASA NTRS1989

Orienting Superconductive Crystals For High Current Density

Proposed technique for controlled distortion of crystal grains in newly discoverd superconductor YBa2Cu3O7-x increases current-carrying capacity. Helps to ensure grains in this and other anisotropic materials all oriented in same direction so charge carriers transferred readily from one grain to another. Specimen of YBa2Cu3O7-x heated in oxygen atmosphere compressed in one direction as slowly cooled below transition temperature. Under these conditions, oxygen atoms tend to rearrange so as to relieve stress created by compression.

Shlichta, Paul J.↗
NASA NTRS1989

Measuring Fracture Times Of Ceramics

Electrical measurements complement or replace fast cinematography. Electronic system measures microsecond time intervals between impacts of projectiles on ceramic tiles and fracture tiles. Used in research on ceramics and ceramic-based composite materials such as armor. Hardness and low density of ceramics enable them to disintegrate projectiles more efficiently than metals. Projectile approaches ceramic tile specimen. Penetrating foil squares of triggering device activate display and recording instruments. As ceramic and resistive film break oscilloscope plots increase in electrical resistance of film.

Shlichta, Paul J.↗
NASA NTRS1988

Substrates For High-Temperature Superconductors

Proposed hot-dipping process prepares materials well suited to serve as substrates for high-temperature superconductors. Makes it possible to produce substrates combining properties needed for given application, such as flexibility, strength, long grains, and <001> crystal orientation. Properties favor growth of superconductive films carrying high current and fabricated in variety of useful shapes. Used in making solar cells, described in "Hot-Dipped Metal Films as Epitaxial Substrates" (NPO-15904).

Shlichta, Paul J.↗
NASA NTRS1988

Laser Micromachining In A Reactive Atmosphere

Drilling of deep holes in silicon by laser beam aided by conducting operation in reactive atmosphere. Atmosphere reacts with material ejected from hole and converts material to gas flowing away from work area. Hole cleaner and more sharply defined, and debris do not spatter surface of work.

Shlichta, Paul J.↗
NASA NTRS1988

Protective Coating For Laser Drilling Of Silicon

Sodium silicate prevents spattered silicon from fusing with surrounding material. Sodium silicate solution applied to wafer by dipping and draining or by spinning; application by spraying also works. When dried in oven, solution leaves thin coating of sodium silicate glass.

Shlichta, Paul J.↗
NASA NTRS1987

Facilitation of the growth of protein crystals by heterogeneous/epitaxial nucleation

A preliminary exploration has been made of the effect of inorganic crystals on the nucleation of protein crystals. Four representative proteins were crystallized by the vapor diffusion technique in the presence of fifty species of inorganic crystals. A substantial decrease in critical supersaturation was caused by thirty nucleants for canavalin and by seven to fifteen nucleants for the other proteins. Several cases of anomalous morphology were observed, as well as one instance of epitaxy, i.e., lysozyme on apophyllite. It has thus been shown that inorganic crystals can be used as heterogeneous nuclei or epitaxial substrates for facilitating reliable and controlled nucleation in automated protein crystal growth experiments.

Mcpherson, Alexander↗
NASA NTRS1985

Method for minimizing convection during crystal growth from solution

Disclosed is a method and apparatus for growing in a gravitational field a microscopic crystal from a solution. Solution is held in a vertical chamber which is relatively thin, the thin dimension being generally perpendicular to the vertical. There is a substrate crystal disposed at either the upper or lower end of the chamber and the crystal grows from this substrate crystal in one direction. In accordance with this invention, the temperature conditions of the solution are controlled so that as the crystal forms the effects of buoyant convection within the solution are minimized. This is accomplished in two different ways depending upon whether the crystal is grown from the upper or lower end of the chamber. When grown from the upper end of the chamber, the temperature of the solution is controlled so that it remains essentially isothermal so that there is essentially no heat loss from the solution. When the crystal is grown from the lower end of the chamber, the temperatures of the solution is controlled so that there is a differential in temperature throughout the solution which provides a positive thermal gradient within the chamber.

Shlichta, Paul J.↗