Search NASA⌕ Search

Engineering topics

Shu, Ting

Publications and source records attributed to Shu, Ting.

High-Performance Core–Shell Catalyst with Nitride Nanoparticles as a Core: Well-Defined Titanium Copper Nitride Coated with an Atomic Pt Layer for the Oxygen Reduction Reaction

A class of core–shell structured low-platinum catalysts with well-dispersed inexpensive titanium copper nitride nanoparticles as cores and atomic platinum layers as shells exhibiting high activity and stability for the oxygen reduction reaction is successfully developed. In using nitrided carbon nanotubes (NCNTs) as the support greatly improved the morphology and dispersion of the nitride nanoparticles, resulting in significant enhancement of the performance of the catalyst. The optimized catalyst, Ti 0.9 Cu 0.1 N@Pt/NCNTs, has a Pt mass activity 5 times higher than that of commercial Pt/C, comparable to that of core–shell catalysts with precious metal nanoparticles as the core, and much higher than that the latter if we take into account the mass activity of all platinum group metals. Furthermore, only a minimal loss of activity can be observed after 10000 potential cycles, demonstrating the catalyst’s high stability. After durability testing, atomic-scale elemental mapping confirmed that the core–shell structure of the catalyst remained intact. This approach may open a pathway for the design and preparation of high-performance inexpensive core–shell catalysts for a wide range of applications in energy conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A high-efficiency relativistic magnetron with the filled dielectric

Relativistic magnetron (RM) is a popular high power microwave device. Filling the resonant cavities with the low-loss dielectric is a well-proven technology that improves the performance of RM. In order to enhance the power efficiency, a dielectric-filled relativistic magnetron (DFRM) is presented and investigated numerically with KARAT code in this paper. The simulation results indicate that the maximum power efficiency is enhanced from 50.0% in the conventional RM to 56.0% in the DFRM when the applied voltage and the magnetic field are 280 kV and 0.5 T, respectively. Besides, the simulation results are analyzed and discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transition metal nitride coated with atomic layers of Pt as a low-cost, highly stable electrocatalyst for the oxygen reduction reaction

Here, the main challenges to the commercial viability of polymer electrolyte membrane fuel cells are (i) the high cost associated with using large amounts of Pt in fuel cell cathodes to compensate for the sluggish kinetics of the oxygen reduction reaction, (ii) catalyst degradation, and (iii) carbon-support corrosion. To address these obstacles, our group has focused on robust, carbon-free transition metal nitride materials with low Pt content that exhibit tunable physical and catalytic properties. Here, we report on the high performance of a novel catalyst with low Pt content, prepared by placing several layers of Pt atoms on nanoparticles of titanium nickel binary nitride. For the ORR, the catalyst exhibited a more than 400% and 200% increase in mass activity and specific activity, respectively, compared with the commercial Pt/C catalyst. It also showed excellent stability/durability, experiencing only a slight performance loss after 10,000 potential cycles, while TEM results showed its structure had remained intact. The catalyst’s outstanding performance may have resulted from the ultrahigh dispersion of Pt (several atomic layers coated on the nitride nanoparticles), and the excellent stability/durability may have been due to the good stability of nitride and synergetic effects between ultrathin Pt layer and the robust TiNiN support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical investigation of the dielectric-filled relativistic magnetron

The fundamental mode frequency of a dielectric-filled relativistic magnetron is studied theoretically by the method of the equivalent circuit, and an exact fundamental mode frequency formula is derived. To prove the validity of the theoretical formula, simulation investigation is performed. The simulation results agree well with the theoretical formula, and the relative error does not exceed 3%. The comparative results verify the creditability of the theoretical formula.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gigawatt-class radiation generated by a Ka-band overmoded Cherenkov-type high power millimeter wave generator

Particle simulation and experimental results are presented about a Ka-band overmoded Cherenkov-type high power millimeter wave generator in this paper. The relativistic electron beam with peak current of 8.4 kA was generated by a pulsed power accelerator working at the voltage of 625 kV, which was guided by an axial magnetic field of 1.05 T and transported through the beam-wave interaction structures. After careful calibration, the microwave power radiated in the far field was as high as about 500 MW, with a frequency of 32.1 GHz and a pulse width of 20 ns. The radiation mode was well controlled to be TM{sub 0n} mode.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Factors influencing the temporal growth rate of the high order TM{sub 0n} modes in the Ka-band overmoded Cherenkov oscillator

When the wavelength of overmoded Cherenkov oscillator goes into Ka-band, power handling capacity becomes an essential issue. Using the TM{sub 02} mode or higher order TM{sub 0n} modes as the operating mode is a potential solution. This paper is aimed to find some proper parameters to make the temporal growth rate of the TM{sub 02} mode higher in our previously studied Gigawatt (GW)-class Ka band oscillator. An accurate and fast calculation method of the “hot” dispersion equation is derived for rectangular corrugated SWSs, which are widely used in the high frequency Cherenkov devices. Then, factors that affect the temporal growth rate of the high order TM{sub 0n} modes are analyzed, including the depth of corrugation, the radius of drift tube, and the diode voltage. Results show that, when parameters are chosen properly, the temporal growth rate of the TM{sub 02} mode can be as high as 0.3 ns{sup −1}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Suppression of the asymmetric modes for experimentally achieving gigawatt-level radiation from a Ku-band Cerenkov type oscillator

We present the analysis and suppression of asymmetric modes in a Ku-band Cerenkov-type oscillator numerically and experimentally. The asymmetric modes generated in the initial experiments were identified to be HE{sub 11}, HE{sub 21}, and HE{sub 31} modes, respectively, by analyzing of the dispersion relationships, the simulation results and the experiment phenomenon. The factors, such as the cathode emission uniformity, the diode voltage, guiding magnetic field, and the concentricity play key roles in the excitation and suppression of these asymmetric modes. In the improved experiments, the asymmetric modes were suppressed effectively. In the improved experiments the asymmetric modes are suppressed effectively, and the designed TM{sub 01} mode microwave is generated at a frequency of 13.76 GHz with a power of 1.1 GW, which is in good agreement with numerically predications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

An efficient gigawatt level X-band Cerenkov type oscillator without guiding magnetic field

This paper presents a novel modification of gigawatt level X-band Cerenkov type high power microwave oscillator without guiding magnetic field. A confining cathode is put forward to suppress the radial dispersion of the annular relativistic electron beam and accordingly improve its axial transportation to ensure further beam-wave interaction. An overmoded nonuniform slow wave structure is adopted in order to increase the power capacity of the oscillator and the efficiency of beam-wave interaction. A tapered collector is used to collect the beam, increase the Q-factor, and extract the microwave favorably. The simulation results indicate that a microwave is generated by the proposed oscillator with output power of 1.9 GW and frequency of 9.02 GHz, when the diode voltage and beam current are 620 kV and 9 kA, respectively. The corresponding power conversion efficiency is 34%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mode composition analysis on experimental results of a Gigawatt-class Ka-band overmoded Cerenkov oscillator

In this paper, a modified numerical method is used to investigate the mode composition of a Gigawatt-class Ka-band overmoded Cerenkov oscillator, which has been proposed and studied in our previous experiment. In the experiment, the measured angular distribution of radiation did not fit a single TM{sub 01} mode. So the particle in cell code calculations and the antenna radiation calculations are carried out, which show a consistent picture: the dominant modes are the TM{sub 01} mode and the TM{sub 03} mode, and their phase relationship is constant with time; therefore, a steady radiation pattern is produced, which matches the experimental data. As a conclusion, the comprehensive analysis shows that the existing modes of the output microwave in our experiment are the first five TM{sub 0n} modes (n = 1–5), with corresponding power ratios of 36.64%, 0.78%, 56.26%, 5.70%, and 0.52%, and relative phase differences of 0°, 146°, 54°, 169°, and 133°.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A long-pulse repetitive operation magnetically insulated transmission line oscillator

The improved magnetically insulated transmission line oscillator (MILO) is a gigawatt-class L-band high power microwave tube. It has allowed us to generate 3.1 GW pulse of 40 ns duration in the single-pulse operation and 500 MW pulse of 25 ns duration in the repetition rate operation. However, because of the severe impedance mismatch, the power conversion efficiency is only about 4% in the repetition rate operation. In order to eliminate the impedance mismatch and obtain repetitive long-pulse high-power microwave (HPM), a series of experiments are carried out and the recent progress is presented in this paper. In the single-pulse operation, when the diode voltage is 466 kV and current is 41.6 kA, the radiated microwave power is above 2.2 GW, the pulse duration is above 102 ns, the microwave frequency is about 1.74 GHz, and the power conversion efficiency is about 11.5%. In the repetition rate operation, under the condition of the diode voltage about 400 kV, beam current about 38 kA, the radiated microwave power is about 1.0 GW, the pulse duration is about 85 ns. Moreover, the radiated microwave power and the pulse duration decline little by little when the shot numbers increase gradually. The experimental results show that the impedance matching is a vital factor for HPM systems and one of the major technical challenges is to improve the cathode for the repetition rate operation MILO.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Simulation of a gigawatt level Ku-band overmoded Cerenkov type oscillator operated at low guiding magnetic field

We present the simulation results of a Ku-band overmoded Cerenkov type high power microwave oscillator. A guiding magnetic field as low as 0.6 T has been operated in the device. Overmoded slow wave structures with gradually tapered vanes are used in order to increase power capacity and the efficiency of beam-wave interaction. The drift cavity is adopted to enhance the beam-wave interaction of the device. After numerical optimization, the designed generator with an output microwave power of 1.2 GW, a frequency of 13.8 GHz, and a power conversion efficiency as high as 38% can be achieved, when the diode voltage and current are, respectively, 540 kV and 5.8 kA. The power compositions of TM{sub 0n} modes of the output microwave have been analyzed, the results of which show that TM{sub 01} mode takes over almost 95% of the power proportion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A direct density modulation cathode in magnetron

A direct Density Modulation Cathode (DMC) in magnetron is proposed in this paper. By removing the velocity modulation process, electron spokes corresponding to the dominant operating mode can be quickly formed when the DMC is used. Based on theoretical analysis, particle-in-cell simulations and experimental investigations are carried out for demonstration. The final results show that compared with conventional solid cathode and transparent cathode, the DMC can increase 68% and even 146% of relative microwave widths, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗