Engineering topics

Si, Chuanling

Publications and source records attributed to Si, Chuanling.

5 records

DOE OSTI2023

Regulating the properties of activated carbon for supercapacitors: impact of particle size and degree of aromatization of hydrochar

Hydrochar (HC), obtained by the hydrothermal carbonization (HTC) of biomass, is an excellent precursor for preparing activated carbon (AC). However, the effects of the intrinsic properties of HC on the microstructure and electrochemical properties of AC are largely unknown. Here, this study investigates the impact of particle size and the degree of aromatization of in-situ HC on the microstructure and electrochemical properties of AC. Our results show that a large particle size and a high degree of aromatization help protect the HC from overactivation by ZnCl 2 , resulting in an large specific surface area (SSA > 2000 m 2 /g) and high mesopore to micropore volume ratio value ( V mes /V mic > 0.3) of the AC. Electrochemical performance measurements show a maximum specific capacitance of 218 F/g at 0.5 A/g was achieved in all samples where the AC (AC180-10 h) was prepared by activating HC180-10 h with a large size, a high degree of aromatization, and abundant surface oxygen-containing functional groups. After AC180-10 h was assembled into a supercapacitor, the specific capacitance of AC180-10 h still reached 158 F/g at 0.5 A/g, and it showed excellent cycling stability. This study advances the understanding of the impact of HC particle size and degree of aromatization on AC properties, providing new insights into tailoring HC qualities so that improving improve the properties of AC.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Growth mechanism of glucose-based hydrochar under the effects of acid and temperature regulation

Improving the tailorability of hydrochar synthesis is an effective way to enhance its performance and utilization efficiency. In this study, the growth rate, morphology, and molecular structure of hydrochar were controlled by regulating the pH and temperature of the hydrothermal carbonization process. Growth process analysis indicates that hydrochar has three growth periods: induction, rapid, and stable growth periods. It is mainly controlled by 5-hydroxymethylfurfural (HMF), which is formed by converting glucose and its transformation products. Further, the regulation of acid can significantly shorten the induction period of hydrochar, even under low-temperature conditions (<180 °C), and increase the growth rate of hydrochar. However, the degree of hydrochar adhesion varies: the lower the temperature, the greater the degree of its adhesion. Molecular structural analysis demonstrates that hydrochar mainly consists of furan structural domains and aromatic clusters, and its surface is rich in oxygen-containing functional groups. The degree at which hydrochar was aromatized was improved by increasing the reaction temperature (160–220 °C); whereas the regulation of acid reduced it and increased the content of oxygen-containing functional groups on the hydrochar surface. Based on these results, it is proposed that hydrochar formation has five stages and three growth periods with or without acid regulation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2022

Role Evaluation of Active Groups in Lignin on UV-Shielding Performance

The contribution of the active groups in lignin to ultraviolet (UV)-shielding performance still remains unclear. In this study, we employed 16 lignin model compounds and theoretical calculations to ascertain the contribution of different functional groups to UV-shielding performance. These results showed that the order of UV-shielding performance on functional groups was -C=C–CHO > -C=C–COOH > -C=C–CH 2 OH > --C=C > quinone > -COOH > -OCH 3 ≈ -OH. Moreover, the synergism between the para-substituted electron-donating group -OH and the electron-withdrawing group allyl on the aromatic ring played a major role in UV-shielding performance of lignin models, whereas the additive effect of meta/ortho-substituted -OCH 3 played a secondary role. Furthermore, we found that the hydrophile–lipophile balance (HLB) value of lignin models also greatly affected the sunscreen protection factor (SPF) of lignin model-based sunscreens. A closer HLB value of lignin to 8.89 corresponded with a higher SPF of the lignin model-based sunscreen. The commercial photoprotective ingredient ethylhexyl methoxycinnamate (EHMC) and lignin models had a synergistic effect on UV-shielding performance caused by the π–π stacking interaction between the parallel-displaced stacked aromatic rings of lignin models and EHMC. Additionally, the UV irradiation test showed that these sunscreens prepared using lignin models and EHMC exhibited good photostability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Enhancing thermal conductivity and toughness of cellulose nanofibril/boron nitride nanosheet composites

Generally, the thermal conductivity (TC) of composite based on cellulose nanofibrils (CNF) is improved by adding thermal conductive filler, which inevitably leads to the loss of its mechanical properties. Here, in this work, it is the first to simultaneously improve the toughness and TC of CNF/boron nitride nanosheets (BNNS) composite from the perspective of thermal conductive filler addition and CNF crystal change. The hydrophilic-modified BNNSs were successfully prepared by xylose-assisted ball-milling prior to adding into CNF. Compared with that of CNF film (1.34 W/(m·K)), the in-plane TC of CNF/BNNS composite (12.68 W/(m·K)) increased significantly by 846 % with loading 30 % BNNS. Afterwards, both toughness (8.0 MJ·m -3 , increased ~250 %) and TC (14.7 W/(m·K), increased ~16 %) of CNF/BNNS composite were further enhanced significantly by mercerization with 12.5 % NaOH solution. The simultaneously improvement of toughness and TC is unprecedented in related studies, which contributes to the effective preparation of thermal management materials.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Competitive effects of glucan’s main hydrolysates on biochar formation: A combined experiment and density functional theory analysis

We report the complexity of polysaccharide hydrothermal products increases the difficulty of exploring the formation of biochar, limiting the development of biochar. This work clarifies the completive effects of glucan’s main hydrolysates on biochar formation from three aspects: experimental, thermodynamic, and kinetic. The products distribution illustrates that 5-HMF, FA, and LA are mainly involved in the formation of biochar. Biochar mainly includes furan ring, ether group, and ester group by the analysis of magic-angle-spinning nuclear magnetic resonance, X-ray photoelectron spectroscopy, and elemental analysis. Combined experiments and density functional theory analysis, the etherification reaction of 5-HMF itself is most likely to occur and is key to form biochar, followed by the esterification of FA with 5-HMF, and then the etherification of 5-HMF and LA. The further verified experiments also manifest these results. This work will develop a foundation for exploring the complex formation mechanism of cellulose-based biochar.

59 BASIC BIOLOGICAL SCIENCES↗