Search NASA⌕ Search

Engineering topics

Siclari, M. J.

Publications and source records attributed to Siclari, M. J..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Ground signature extrapolation of three-dimensional near-field CFD predictions for several HSCT configurations

A CFD analysis of the near-field sonic boom environment of several low boom High Speed Civilian Transport (HSCT) concepts is presented. The CFD method utilizes a multi-block Euler marching code within the context of an innovative mesh topology that allows for the resolution of shock waves several body lengths from the aircraft. Three-dimensional pressure footprints at one body length below three-different low boom aircraft concepts are presented. Models of two concepts designed by NASA to cruise at Mach 2 and Mach 3 were built and tested in the wind tunnel. The third concept was designed by Boeing to cruise at Mach 1.7. Centerline and sideline samples of these footprints are then extrapolated to the ground using a linear waveform parameter method to estimate the ground signatures or sonic boom ground overpressure levels. The Mach 2 concept achieved its centerline design signature but indicated higher sideline booms due to the outboard wing crank of the configuration. Nacelles are also included on two of NASA's low boom concepts. Computations are carried out for both flow-through nacelles and nacelles with engine exhaust simulation. The flow-through nacelles with the assumption of zero spillage and zero inlet lip radius showed very little effect on the sonic boom signatures. On the other hand, it was shown that the engine exhaust plumes can have an effect on the levels of overpressure reaching the ground depending on the engine operating conditions. The results of this study indicate that engine integration into a low boom design should be given some attention.

Siclari, M. J.↗
NASA NTRS1991

CFD prediction of the near-field sonic boom environment for two low boom HSCT configurations

Current efforts to reduce the sonic boom of a future High Speed Civil Transport (HSCT) by careful shaping have led to the need for more accurate predictions of the near-field flow conditions of the configuration. A fully three-dimensional Euler finite volume code is used to predict sonic boom pressure signatures for two low boom concepts - one designed to cruise at Mach 2 and the other at Mach 3. Calculations were carried out using a grid topology that has been modified to reduce the inaccuracies caused by grid spreading often suffered with CFD methods when calculations several body lengths downstream become necessary. Comparisons of CFD results and experimental wind tunnel signatures are shown. Ground signatures are predicted by extrapolating the pressures predicted by the Euler code with an extrapolation method based on the Whitham theory.

Siclari, M. J.↗
NASA NTRS1990

An Euler code prediction of near field to midfield sonic boom pressure signatures

A new approach is presented for computing sonic boom pressure signatures in the near field to midfield that utilizes a fully three-dimensional Euler finite volume code capable of analyzing complex geometries. Both linear and nonlinear sonic boom methodologies exist but for the most part rely primarily on equivalent area distributions for the prediction of far field pressure signatures. This is due to the absence of a flexible nonlinear methodology that can predict near field pressure signatures generated by three-dimensional aircraft geometries. It is the intention of the present study to present a nonlinear Euler method than can fill this gap and supply the needed near field signature data for many of the existing sonic boom codes.

Siclari, M. J.↗
NASA NTRS1986

Nonconical Relaxation for Supersonic Potential Flow

Nonlinear, three-dimensional effects computed from full potentialflow equation. Nonconical Relaxation program, NCOREL, employs new computational technique for prediction of inviscid, nonlinear supersonic aerodynamics. Unlike conventional linear potential equations, NCOREL utilizes full potential flow equation to predict formation of supercritical crossflow regions, embedded shocks, and bow shocks. NCOREL written in FORTRAN IV for batch execution.

Siclari, M. J.↗
NASA NTRS1986

Application of NCOREL to conical multi-finned and multi-faceted configurations

A more versatile analytic conformal mapping approach for grid generation is implemented in a full potential supersonic flow code (NCOREL). Configurations such as multi-finned bodies and wings with vertical tails cannot be treated using a single conformal mapping transformation for grid generation. Instead, a series of analytic conformal mappings are used in progression to generate grids that are capable of resolving the complex multiple shock flow fields that exist about these configurations. Aplications of the grid generation techniques are presented for a variety of cross sections along with their conical full potential flow solutions.

Siclari, M. J.↗
NASA NTRS1986

Application of NCOREL to aircraft configurations

The NCOREL computer program and methodology (Grossman, 1979) modified for computation of flows over complex geometries is described. The newly introduced features include a more flexible grid-generation package, capable of generating grids for realistic wing-body cross sections, and a more general numerical method, developed for the capture of highly three-dimensional embedded, oblique shocks. In addition, an inlet capability is included, by means of which the cross section is allowed to change discontinuously with the addition of the inlet geometry. The new cross section is regridded and the potentials and their derivatives are interpolated for the marching to continue. Hence, a discontinuity in the grid or mappings is taken into account at the inlet station. The results of the flow-field computation for a realistic fighter configuration are discussed.

Siclari, M. J.↗
NASA NTRS1986

Supersonic full-potential method applied to missile bodies

The NCOREL full-potential method with an entropy correction is presently applied to supersonic missile flowfield problems. After defining the salient characteristics of the method, a combination of linear theory with NCOREL and experimental data is used to isolate the nonlinear features of the supersonic flow so that the influence of geometry and flow conditions on the development of such flow nonlinearities can be appreciated. Comparisons of experimental longitudinal force and moment data with NCOREL and various linear theory predictions are presented for several generic missile airframe configurations of circular and elliptic cross section. The NCOREL code solves the nonconservative full potential equation in a spherical coordinate system; exact boundary conditions are defined on the missile surface.

Pittman, J. L.↗
NASA NTRS1985

The computational treatment of supersonic wake flows in INCOREL

Supersonic wake flows are computed in both conical and three-dimensional full potential flows by modeling the wake as a planar cut with a potential discontinuity. Continuity of pressure is satisfied exactly on the wake cut by computing the necessary potential jump at each wake cut grid point. In the conical wake problem, the jump in potential vanishes in the crossflow symmetry plane. Generally, good correlation is achieved for fully three-dimensional wake flows with the planar wake approximation. Matching pressures in the isolated wake flow leads to small variations in the spanwise jump in potential. On the other hand, a small variation in the jump in potential near the wing tip flow can lead to a significant loading in the wake flow if the pressures are not matched.

Siclari, M. J.↗
NASA NTRS1984

Supersonic nonlinear potential analysis

The NCOREL computer code was established to compute supersonic flow fields of wings and bodies. The method encompasses an implicit finite difference transonic relaxation method to solve the full potential equation in a spherical coordinate system. Two basic topic to broaden the applicability and usefulness of the present method which is encompassed within the computer code NCOREL for the treatment of supersonic flow problems were studied. The first topic is that of computing efficiency. Accelerated schemes are in use for transonic flow problems. One such scheme is the approximate factorization (AF) method and an AF scheme to the supersonic flow problem is developed. The second topic is the computation of wake flows. The proper modeling of wake flows is important for multicomponent configurations such as wing-body and multiple lifting surfaces where the wake of one lifting surface has a pronounced effect on a downstream body or other lifting surfaces.

Siclari, M. J.↗
NASA NTRS1984

Nonlinear aerodynamic effects on bodies in supersonic flow

The supersonic flow about generic bodies was analyzed to identify the elments of the nonlinear flow and to determine the influence of geometry and flow conditions on the magnitude of these nonlinearities. The nonlinear effects were attributed to separated-flow nonlinearities and attached-flow nonlinearities. The nonlinear attached-flow contribution was further broken down into large-disturbance effects and entropy effects. Conical, attached-flow bundaries were developed to illustrate the flow regimes where the nonlinear effects are significant, and the use of these boundaries for angle of attack and three-dimensional geometries was indicated. Normal-force and pressure comparisons showed that the large-disturbance and separated-flow effects were the dominant nonlinear effects at low supersonic Mach numbers and that the entropy effects were dominant for high supersonic Mach number flow. The magnitude of all the nonlinear effects increased with increasing angle of attack. A full-potential method, NCOREL, which includes an approximate entropy correction, was shown to provide accurate attached-flow pressure estimates from Mach 1.6 through 4.6.

Pittman, J. L.↗
NASA NTRS1983

The NCOREL computer program for 3D nonlinear supersonic potential flow computations

An innovative computational technique (NCOREL) was established for the treatment of three dimensional supersonic flows. The method is nonlinear in that it solves the nonconservative finite difference analog of the full potential equation and can predict the formation of supercritical cross flow regions, embedded and bow shocks. The method implicitly computes a conical flow at the apex (R = 0) of a spherical coordinate system and uses a fully implicit marching technique to obtain three dimensional cross flow solutions. This implies that the radial Mach number must remain supersonic. The cross flow solutions are obtained by using type dependent transonic relaxation techniques with the type dependency linked to the character of the cross flow velocity (i.e., subsonic/supersonic). The spherical coordinate system and marching on spherical surfaces is ideally suited to the computation of wing flows at low supersonic Mach numbers due to the elimination of the subsonic axial Mach number problems that exist in other marching codes that utilize Cartesian transverse marching planes.

Siclari, M. J.↗
NASA NTRS1983

A supersonic maneuver wing designed for nonlinear attached flow

A wing designed using the concept of attached supercritical crossflow for supersonic maneuvering aircraft wings has been built and tested. The detailed wing shape was determined using nonlinear potential flow computational aerodynamics methods to obtain a specified target pressure distribution. The test results showed that the target pressures were essentially obtained and that the drag-due-to-lift values at maneuver lift coefficients were considerably less than those expected using linear theory design procedures. The paper provides a detailed description of the wing design and test, and an analysis of the results.

Mason, W. H.↗
NASA NTRS1982

Study of VTOL in ground-effect flow field including temperature effect

Detailed pressure, temperature, and velocity data were obtained for twin-fan configurations in-ground-effect and flow models to aid in predicting pressures and upwash forces on aircraft surfaces were developed. For the basic experiments, 49.5 mm-diameter jets were used, oriented normal to a simulated round plane, with pressurized, heated air providing a jet. The experimental data consisted of: (1) the effect of jet height and temperature on the ground, model, and upwash pressures, and temperatures, (2) the effect of simulated aircraft surfaces on the isolated flow field, (3) the jet-induced forces on a three-dimensional body with various strakes, (4) the effects of non-uniform coannular jets. For the uniform circular jets, temperature was varied from room temperature (24 C) to 232 C. Jet total pressure was varied between 9,300 Pascals and 31,500 Pascals. For the coannular jets, intended to represent turbofan engines, fan temperature was maintained at room temperature while core temperature was varied from room temperature to 437 C. Results are presented.

Hill, W. G.↗
NASA NTRS1982

Computation of nonlinear supersonic potential flow over three dimensional surfaces

A fully implicit three dimensional marching technique is presented for the computation of inviscid supersonic flows. The nonconservative full potential equation is solved on spherical cross flow planes using standard transonic SLOR techniques. The three dimensional bow shock is fitted as a boundary with isentropic jump conditions and embedded shocks are captured. Applications of these techniques are presented for three dimensional bodies, wings, and wing-body configurations and the computed solutions are compared to experimental pressure data. Zero lift wave drag calculations are also presented and compared with measurements to evaluate the accuracy of the present techniques.

Siclari, M. J.↗
NASA NTRS1980

VTOL in-ground effect flows for closely spaced jets

The interaction of two vertically impinging incompressible jets is studied through the invention of physical flow models that approximate the behavior of colliding wall jets as the incident jets are brought closer together. The mechanism for upwash formation is studied and momentum models for the upwash sheet are postulated. An approximate method for computing the ground isobar pattern of jet and upwash deflection zones is presented and compared with test data. A method for computing the upwash impingement force in the absence of secondary induced flow effects is also presented and reasonably good agreement is achieved with experimental data for cylindrical fuselage shapes of circular and rectangular cross section.

Siclari, M. J.↗