Search NASA⌕ Search

Engineering topics

Siegrist, Theo

Publications and source records attributed to Siegrist, Theo.

At least 19 records

Cooling Mixed A-Site Halide Perovskites: Impact of Temperature on Optical and Structural Properties

The widespread utilization of perovskite-based photovoltaics requires probing both the structural and optical properties under extreme operating conditions to gain a holistic understanding of the material behavior under stressors. Here, in this study, we investigate the temperature-dependent behavior of mixed A-site cation lead triiodide perovskite thin films (85% methylammonium and 15% formamidinium) in the range from 300 to 20 K. Through a combination of optical and structural techniques, we find that the tetragonal-to-orthorhombic phase transition occurs at similar to 110 K for this perovskite composition, as indicated by the change in the diffraction pattern. With decreasing temperature, the quantum yield increases with a concurrent elongation of the carrier lifetimes, indicating suppression of nonradiative recombination pathways. Interestingly, in contrast to single A-site cation perovskites, an additional optical transition appears in the absorption spectrum when the phase transition is approached, which is also reflected in the emission spectrum. We propose that the splitting of the optical absorption and emission is due to local segregation of the mixed cation perovskite during the phase transition.

36 MATERIALS SCIENCE↗

Cool carriers: triplet diffusion dominates upconversion yield

Perovskites have gained popularity both as the active material in photovoltaics and as bulk triplet sensitizers for solid-state triplet–triplet annihilation upconversion (TTA-UC). Prior to widespread implementation into commercial photovoltaics, an in-depth understanding of the environmental influences on device performance is required. To this point, the temperature-dependent structure–function properties of TTA-UC within methylammonium formamidinium lead triiodide (MAFA)/rubrene UC devices are explored. A strong temperature dependence of the underlying UC dynamics is observed, where the maximum UC efficiency is achieved at 170 K, reflecting the competition between triplet diffusion length, diffusion rate, and triplet–triplet encounter events. Furthermore, a combination of spectroscopic and structural methods and theoretical modelling illustrates that despite the significantly increased carrier lifetime of the perovskite at low temperatures, the TTA-UC dynamics are not governed by the underlying sensitizer properties but rather limited by the underlying triplet diffusion.

Sullivan, Colette M.↗

Enhanced Thermoelectric Properties of Heavy-fermion Compounds $\text{Yb}_x\text{Ce}_y\text{Sm}_z\text{Ir}_2\text{Zn}_{20}$ $(x+y+z=1)$

Herein, thermoelectric materials hold tremendous promise for advances in fundamental science and practical ap- plications, particularly for robust electricity generation in extreme and remote environments. Despite this, for most materials the energy conversion efficiency is limited by the proportionality between the electrical and thermal conductivities and small values of the Seebeck coefficient for metals. It was previously reported that the heavy-fermion compound $\text{YbIr}_2$ $\text{Zn}_{20}$ exhibits large Seebeck coefficient and thermoelectric figure of merit $ZT$ at 35 K. This behavior is primarily associated with strong hybridization between the $f$- and conduction electron states. Here, we seek to improve the thermoelectric properties through chemical substitution on the Yb site using Ce and Sm. By surveying different levels of substitution, we find that the thermoelectric properties vary strongly with the $f$-element ratio. This confirms that electronic hybridization dominates the thermoelectric properties and clarifies directions for optimizing these materials for applications. We also investigate the impact of the disorder on the thermal conductivity, where we find only weak variation with lanthanide content.

36 MATERIALS SCIENCE↗

Perovskite-Sensitized Upconversion under Operando Conditions

Perovskite-sensitized upconversion (UC) has resulted in near-infrared-to-visible UC at solar-relevant fluxes. However, the successful implementation of UC devices into operating solar cells will result in exposure to similar environmental stressors as for the commercial photovoltaics (PVs), mainly elevated temperatures, and continuous irradiation. In this article, we investigated the effects of these two stressors, heat and light, on the triplet generation process at the perovskite/rubrene interface. Following exposure to both stressors, local discrepancies across the upconversion device were discovered. Here, the first region showed changes to the morphology, and no detectable upconverted emission was observed. Through the combination of optical microscopy and spectroscopy, crystallization of the organic semiconductor layer, degradation of dibenzotetraphenylperiflanthene, and concurrent degradation of the perovskite sensitizer were found. These effects culminate in a reduction in both triplet generation and triplet–triplet annihilation. In the second region, no changes to the morphology were present and visible UC emission was observed following exposure to both stressors. To probe the triplet sensitization process at elevated temperatures, transient absorption spectroscopy was performed. The presence of the excited spin-triplet state of rubrene at 60 °C highlighted successful triplet generation even at elevated temperatures. This work emphasizes the challenges and continued potential for the integration of perovskite-sensitized UC into commercial photovoltaic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Locating anionic hydrogen in Ba 3 (Yb,Lu) 2 O 5 H 2 : A combined approach of X-ray diffraction, crystal chemistry, and DFT calculations

By a combination of x-ray diffraction, structural chemistry, and DFT calculations, the presence and location of anionic hydrogen in the two new, layered lanthanide oxyhydrides, Ba 3 Ln 2 O 5 H 2 (Ln ​= ​Yb, Lu) is inferred. Single crystals of the compounds have been synthesized from a molten barium flux with the addition of small amounts of BaH 2 . These phases crystallize in space group I4/mmm (#139, Z ​= ​2) with lattice parameters a ​= ​4.3336(2) Å and c ​= ​22.7197(6) Å, and a ​= ​4.3291(1) Å and c ​= ​22.597(1) Å, respectively. The Ba 3 Ln 2 O 5 H 2 phases comprise two different structural moieties: a perovskite double layer of stoichiometry Ba 2 Ln 2 O 5 H – formed by corner-connected LnO 5 tetragonal bi-pyramids with a terminating hydrogen anion, and a puckered rocksalt-type (BaH) + layer that is stretched along the c-axis. DFT calculations were used to arrive at hydrogen positions that minimize energy and are consistent with structural chemistry principles. Furthermore, the calculations show that the valence band edge is dominated by oxygen 2p orbitals with hydrogen 1s states admixed. The conduction band is formed by barium 5d-orbitals and Lu (Yb) 5d-orbitals. These are characteristics of materials with anionic H – . These new phases are isostructural with the Ba 3 Ln 2 O 5 Cl 2 (Ln ​= ​Gd–Lu) family of compounds with the chlorine atom in the same apical position as the hydrogen atom. Finally, steric effects limit the size of the lanthanide ion for Ba 3 Ln 2 O 5 H 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal growth and magnetic structure of ternary silicide Eu Pd 3 Si 2

The hexagonal CaCu 5 –type structure (P6/mmm) is the prototype for more than 100 ternary borides, gallides, and silicides, with general stoichiometry of RTM 3 X 2 (R=lanthanide/alkaline earth; TM=transition metal; X=B, Ga, Si, Ge). Here we report the synthesis, crystal structure, and bulk magnetic properties of polycrystalline and single crystal samples of EuPd 3 Si 2 and its nonmagnetic analog SrPd 3 Si 2 . Both compounds crystallize in the orthorhombic space group symmetry Imma (no. 74, Z = 2, oI12) displaying pseudohexagonal symmetry. Ferromagnetic (FM) order of Eu 2+ at T C1 =78K and a spin-reorientation transition at T C2 =5K appear as distinctive features in bulk magnetization, specific heat, and resistivity/resistance measurements. Neutron powder diffraction measurements on EuPd 3 Si 2 confirm FM order of the Eu 2+ spins below T C1 , with the spins aligned along the a axis below T C2 . Electronic band structure calculations corroborate the crystal structure and the FM state for EuPd 3 Si 2 , with a Pd d–band polarization in the same direction as the Eu 4f polarization, enhancing the observed spin moment.

36 MATERIALS SCIENCE↗

Assessing Nontrivial Topology in Weyl Semimetals by Dichroic Photoemission

The electronic structure of Weyl semimetals features Berry flux monopoles in the bulk and Fermi arcs at the surface. While angle-resolved photoelectron spectroscopy (ARPES) is successfully used to map the bulk and surface bands, it remains a challenge to explicitly resolve and pinpoint these topological features. Here we combine state-of-the-art photoemission theory and experiments over a wide range of excitation energies for the Weyl semimetals TaAs and TaP. Further, our results show that simple surface-band-counting schemes, proposed previously to identify nonzero Chern numbers, are ambiguous due to pronounced momentum-dependent spectral weight variations and the pronounced surface-bulk hybridization. Instead, our findings indicate that dichroic ARPES provides an improved approach to identify Fermi arcs but requires an accurate description of the photoelectron final state.

36 MATERIALS SCIENCE↗

Investigation of the monopole magneto-chemical potential in spin ices using capacitive torque magnetometry

The single-ion anisotropy and magnetic interactions in spin-ice systems give rise to unusual non-collinear spin textures, such as Pauling states and magnetic monopoles. The effective spin correlation strength (J eff ) determines the relative energies of the different spin-ice states. With this work, we display the capability of capacitive torque magnetometry in characterizing the magneto-chemical potential associated with monopole formation. We build a magnetic phase diagram of Ho 2 Ti 2 O 7 , and show that the magneto-chemical potential depends on the spin sublattice (α or β), i.e., the Pauling state, involved in the transition. Monte Carlo simulations using the dipolar-spin-ice Hamiltonian support our findings of a sublattice-dependent magneto-chemical potential, but the model underestimates the J eff for the β-sublattice. Additional simulations, including next-nearest neighbor interactions (J 2 ), show that long-range exchange terms in the Hamiltonian are needed to describe the measurements. This demonstrates that torque magnetometry provides a sensitive test for J eff and the spin-spin interactions that contribute to it.

36 MATERIALS SCIENCE↗

Metal Halide Scaffolded Assemblies of Organic Molecules with Enhanced Emission and Room Temperature Phosphorescence

Ionically bonded organic metal halide hybrids have emerged as versatile multicomponent material systems exhibiting unique and useful properties. The unlimited combinations of organic cations and metal halides lead to the tremendous structural diversity of this class of materials, which could unlock many undiscovered properties of both organic cations and metal halides. Here we report the synthesis and characterization of a series benzoquinolinium (BZQ) metal halides with a general formula (BZQ)Pb 2 X 5 (X = Cl, Br), in which metal halides form a unique two-dimensional (2D) structure. These BZQ metal halides are found to exhibit enhanced photoluminescence and stability as compared to the pristine BZQ halides, due to the scaffolding effects of 2D metal halides. Optical characterizations and theoretical calculations reveal that BZQ + cations are responsible for the emissions in these hybrid materials. Changing the halide from Cl to Br introduces heavy atom effects, resulting in yellow room temperature phosphorescence (RTP) from BZQ + cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vacancy defect control of colossal thermopower in FeSb2

Abstract Iron diantimonide is a material with the highest known thermoelectric power. By combining scanning transmission electron microscopic study with electronic transport neutron, X-ray scattering, and first principle calculation, we identify atomic defects that control colossal thermopower magnitude and nanoprecipitate clusters with Sb vacancy ordering, which induce additional phonon scattering and substantially reduce thermal conductivity. Defects are found to cause rather weak but important monoclinic distortion of the unit cell P n n m → P m . The absence of Sb along [010] for high defect concentration forms conducting path due to Fe d orbital overlap. The connection between atomic defect anisotropy and colossal thermopower in FeSb 2 paves the way for the understanding and tailoring of giant thermopower in related materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superstructures and Superconductivity Linked with Pd Intercalation in Nb 2 Pd x Se 5

Single crystals of Nb 2 Pd x Se 5 have been grown covering a broad range of palladium stoichiometries, from x = 0.68 to x = 0.95 (Pd2 occupancies 0.36 and 0.90 respectively). Miscibility gaps in the Pd stoichiometry range are related to superstructures resulting from staged filling and ordering of the partially filled Pd atom site (Pd2, Wyckoff site 2a). For Pd2 near 1/2 occupancy, a superstructure based on an incommensurate occupation wave with modulation along the monoclinic b-axis is identified. Here, a superconducting dome is found for Pd2 occupancies above 0.58, with maximum Tc for Pd2 occupancy of approximately 2/3. DFT calculations for the fully and 1/2 occupied Pd2 site show that Nb 2 Pd x Se 5 can be considered an intercalation compound for Pd2 occupancy above the minimum required for structural stability.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Bulk Assembly of Zero-Dimensional Organic Lead Bromide Hybrid with Efficient Blue Emission

Zero-dimensional (0D) organic metal halide hybrids are an emerging class of light emitting materials with exceptional photoluminescence quantum efficiencies (PLQEs), thanks to their perfect “host–guest” structures with light emitting metal halide species periodically “embedded” in a wide band gap organic cationic matrix through ionic bonds. However, achieving efficient blue emissions is challenging for this class of materials, as structural distortions of metal halides often lead to large Stokes shifts. Here we report a highly luminescent blue emitting 0D organic lead bromide, (C 13 H 19 N 4 ) 2 PbBr 4 , with a peak emission of 460 nm (2.70 eV), a full width at half maximum (FWHM) of 66 nm (0.40 eV), a Stokes shift of 111 nm (0.85 eV), and a PLQE of ~40%. Single crystal structure analysis shows that individual PbBr 4 2– species adopt a near-seesaw structure, which are coordinated to benzyl-hexamethylenetetrammonium (C 13 H 19 N 4 + ) organic cations. The relatively small Stokes shift as compared to those of previously reported 0D organic metal halide hybrids are attributed to the low chemical reactivity of Pb 6s 2 lone pairs and the rigid organic cationic matrix. Finally, (C 13 H 19 N 4 ) 2 PbBr 4 also shows exceptional stability in air with little-to-no change of properties for more than a year in ambient conditions.

36 MATERIALS SCIENCE↗

Orthorhombic to monoclinic phase transition in NbNiTe 2

We report the high-temperature structural phase transition of the potential topological material NbNiTe 2 has been studied in detail. At high temperatures, the structure is centrosymmetric with orthorhombic space-group $P\frac{2}{m}\frac{2}{n}\frac{2_1}{a}(Pmna)$, and distorts at 373 K to a monoclinic structure with space-group $P11\frac{2_1}{a}(P112_1/a)$. A small signature in specific heat and commensurate small release of entropy are observed at the phase transition. The low-temperature monoclinic structure retains its inversion center and the symmetries associated with the orthorhombic $\mathcal{c}$ axis. At high temperatures, NbNiTe 2 shows phonon instabilities at Γ and X, which are removed by the structural phase transition. The electronic structure of NbNiTe 2 is only slightly affected, indicating this ferroic phase transition is primarily due to steric effects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mini volume collapse as evidence for a three-body magnetic polaron in S m 1 - x E u x S

Samarium sulfide (SmS) is a nonmagnetic narrow-gap (0.06 eV) semiconductor that undergoes a transition to a metallic intermediate valence state at 6.5 kbar. Europium sulfide (EuS) is a ferromagnetic semiconductor with a Curie temperature of 16 K and a gap of 1.6 eV. Here we present a study of the lattice constant, magnetic susceptibility, and resistivity of the substitution series Sm 1-x Eu x S for 0 < x < 1. We observe a smooth interpolation of magnetic and transport behavior across the series, consistent with a virtual crystal scenario and Vegard’s law. Surprisingly, however, the lattice constant deviates below Vegard’s law in a manner that suggests parametric control of the Sm-Sm distance by the Eu moment in the manner of a magnetic polaron.

36 MATERIALS SCIENCE↗

Antiferroelectric Phase Transition in a Proton-Transfer Salt of Squaric Acid and 2,3-Dimethylpyrazine

A proton-transfer reaction between squaric acid (H 2 sq) and 2,3-dimethylpyrazine (2,3-Me 2 pyz) results in crystallization of a new organic antiferroelectric (AFE), (2,3-Me 2 pyzH + )(Hsq – )·H 2 O ( 1 ), which possesses a layered structure. The structure of each layer can be described as partitioned into strips lined with methyl groups of the Me 2 pyzH + cations and strips featuring extensive hydrogen bonding between the Hsq – anions and water molecules. Variable-temperature dielectric measurements and crystal structures determined through a combination of single-crystal X-ray and neutron diffraction reveal an AFE ordering at 104 K. The phase transition is driven by ordering of protons within the hydrogen-bonded strips. Considering the extent of proton transfer, the paraelectric (PE) state can be formulated as (2,3-Me 2 pyzH + ) 2 (Hsq 2 3– )(H 5 O 2 + ), whereas the AFE phase can be described as (2,3-Me 2 pyzH + )(Hsq – )(H 2 O). The structural transition caused by the localization of protons results in the change in color from yellow in the PE state to colorless in the AFE state. The occurrence and mechanism of the AFE phase transition have been also confirmed by heat capacity measurements and variable-temperature infrared and Raman spectroscopy. This work demonstrates a potentially promising approach to the design of new electrically ordered materials by engineering molecule-based crystal structures in which hydrogen-bonding interactions are intentionally partitioned into quasi-one-dimensional regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗