Search NASA⌕ Search

Engineering topics

Sigov, A. S.

Publications and source records attributed to Sigov, A. S..

Thermal detector for measuring radiation parameters of pulsed lasers and generators of submillimetre and millimetre ranges

A theoretical formula is derived that makes it possible to establish a relationship between the speed and sensitivity of bolometers with geometric and thermophysical parameters of the receiving element and substrate. The result is confirmed by a preliminary (evaluation) experiment. The proposed thermal detectors can record and measure the radiation power of lasers and generators of the submillimetre (SMM) and millimetre (MM) ranges. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Changes in the Magnetic Structure of Multiferroic BiFe{sub 0.80}Cr{sub 0.20}O{sub 3} with Temperature

The results of a Mössbauer study of the magnetic structure of multiferroic BiFe{sub 0.80}Cr{sub 0.20}O{sub 3} in the temperature range of 5–550 K are presented. It is found that a collinear antiferromagnetic structure of the G type is present in BiFe{sub 0.80}Cr{sub 0.20}O{sub 3} at temperatures below 260 K. Above 260 K, an anharmonic spin wave with a magnetic anisotropy of the easy-axis type with a high value of the anharmonicity parameter m arises. With a further increase in the temperature, the m parameter decreases and tends to zero at T ~ 420 K, at which a harmonic spin wave comes into existence. Above a temperature of about 420 K, the m parameter increases again and the spin wave becomes anharmonic with an easy-plane magnetic anisotropy. At the Néel temperature, T{sub N} = 505 ± 10 K, the sample undergoes a transition from the magnetically ordered to the paramagnetic state. The change in the type of magnetic anisotropy at T ~ 420 K is explained by competing contributions of different signs to the effective magnetic anisotropy constant and their different temperature dependence for the BiFe{sub 0.80}Cr{sub 0.20}O{sub 3} multiferroic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Imry–Ma Phase in a Nanocrystalline Ferromagnet

A possibility of appearing a disordered Imry–Ma state induced by fluctuations of the anisotropy easy axis direction in a nanocrystalline sample in the case of a weak exchange interaction between crystallites has been studied. A phase diagram of the system has been built in variables “the characteristic crystallite size–the exchange integral of the intercrystallite interaction.” The characteristic value of statistic fluctuations of the crystallographic anisotropy has been estimated, and the dependences of the coercive field on the crystallite size have been found for systems of various space dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural Features of PLZT Films

Lead zirconate titanate (PZT) films doped with lanthanum, Pb({sub 1–х)}La{sub х}(Zr{sub 0.48}Ti{sub 0.52}) (х = 0, 0.02, 0.05, 0.08, or 0.01), have been investigated by electron microscopy and X-ray diffraction. Films were formed on Si–SiO{sub 2}–TiO{sub 2}–Pt substrates by chemical vapor deposition from a solution and annealed at temperatures T = 650 and 750°C. The main structural features of the films, differing them from undoped PZT films fabricated by the same method, have been established. It is found that doping with lanthanum delays the pyrochlore–perovskite transformation in the film bulk, i.e., in the regions distant from the film–substrate interface. The fraction of metastable pyrochlore phase increases with an increase in the La molar content in the films. The main reason for the delay is the deficit of lead in the intergranular perovskite space, especially in the upper part of the film. Annealing at T = 750°C reduces the content of pyrochlore phase but does not completely remove it, which was never observed for undoped PZT films. Doping with lanthanum leads to a change in the lattice period c and a tetragonal distortion of the perovskite lattice (c/a ratio). Hence, the [100] texture of the films obtained, in contrast to the typical [111] texture of PZT films, is due to the increase in the lattice mismatch between the film and platinum layer when lead atoms are replaced with lanthanum. Lattice distortions of “transrotational” character, whose value exceeds 160 deg/μm, are found to arise in growing crystals.

36 MATERIALS SCIENCE↗

High-Sensitivity Photodetector Based on Atomically Thin MoS{sub 2}

A design for a high-sensitivity photodetector with a single layer of MoS{sub 2} transition-metal dichalcogenide used as the basic functional element is proposed and the process of its fabrication is presented step by step. Quality evaluation and the selection of functional MoS{sub 2} flakes is based on the results of combined optical characterization. The main operating characteristics of the fabricated device are investigated and a photosensitivity of 1.4 mA/W is demonstrated. A difference of this device in comparison with existing analogues is its high photosensitivity at low operating voltages (in the range of ±3 V).

36 MATERIALS SCIENCE↗

The Mechanisms of Absorption of Terahertz and Infrared Radiation in PZT Films

Terahertz and IR spectra of dielectric response of dense and porous Pb(Zr,Ti)O{sub 3} films deposited on single-crystal magnesia and alumina substrates and on silicon substrates with a conducting platinum sublayer are measured in the and analyzed. We consider the key mechanisms of electric dipole absorption that give rise to absorption bands observed in experimentally measured reflection and transmission spectra, and discuss the relationship between the type of substrate and the parameters characterizing the absorption bands in the spectra of the prepared PZT films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Schottky-Barrier Model Nonlinear in Surface-State Concentration and Calculation of the I–V Characteristics of Diodes Based on SiC and Its Solid Solutions in the Composite Charge-Transport Model

A modified Schottky-barrier model, which is nonlinear in terms of the surface-state concentration and contains a local quasi-Fermi level at the interface induced by excess surface charge, is proposed. Such an approach makes it possible to explain the observed similarity of the I–V characteristics of diodes with the Schottky barrier M/(SiC){sub 1–x}(AlN){sub x} and those of heterojunctions based on SiC and its solid solutions taking into account Φ{sub g} ≈ Φ{sub B}. The results of calculations of the Schottky-barrier heights are consistent with the experimental data obtained from measurements of the photocurrent for metals (M): Al, Ti, Cr, and Ni. The I–V characteristics in the composite–additive model of charge transport agree with the experimental data for the n-M/p-(SiC){sub 1–x}(AlN){sub x} and n-6H-SiC/p-(SiC){sub 0.85}(AlN){sub 0.15} systems.

36 MATERIALS SCIENCE↗

Effect of the Crystal Structure on the Electrical Properties of Thin-Film PZT Structures

A new method of two-stage crystallization of lead zirconate–titanate (PZT) films using a seed sublayer with a low excess lead content has been proposed and realized. A seed layer with a strong texture of perovskite Pe(111) grains is formed from a solution with a lead excess of 0–5 wt %; the fast growth of the grains is provided by the deposition of the main film from a solution with high lead content. As a result, a strong Pe(111) texture with complete suppression of the Pe(100) orientation forms. An analysis of current–voltage dependences of the transient currents and the distributions of the local conductivity measured by the contact AFM method reveals two various mechanisms of current percolation that are determined by traps in the bulk and at the perovskite grain interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the Steady State Leakage Current in Structures with Ferroelectric Ceramic Films

Steady state leakage currents have been investigated in capacitor structures with ferroelectric solgel films of lead zirconate titanate (PZT) formed on silicon substrates with a lower Pt electrode. It is established that Pt/PZT/Hg structures, regardless of the PZT film thickness, are characterized by the presence of a rectifying contact similar to p–n junction. The steady state leakage current in the forward direction increases with a decrease in the film thickness and is determined by the ferroelectric bulk conductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cubic anisotropy created by defects of “random local anisotropy” type, and phase diagram of the O(n) Model

The expression for the cubic-type-anisotropy constant created by defects of “random local anisotropy” type is derived. It is shown that the Imry–Ma theorem stating that in space dimensions d < 4 the introduction of an arbitrarily small concentration of defects of the “random local anisotropy” type in a system with continuous symmetry of the n-component vector order parameter (O(n) model) leads to the long-range order collapse and to occurrence of a disordered state, is not true if an anisotropic distribution of the defectinduced random easy axes directions in the order parameter space creates a global anisotropy of the “easy axis” type. For a weakly anisotropic distribution of the easy axes, in space dimensions 2 ≤ d < 4 there exists some critical defect concentration, when exceeded, the inhomogeneous Imry–Ma state can exist as an equilibrium one. At the defect concentration lower than the critical one the long-range order takes place in the system. For a strongly anisotropic distribution of the easy axes, the Imry–Ma state is suppressed completely and the long-range order state takes place at any defect concentration.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optimization of sensors based on surface waves in flat-layered structures

A method for increasing the sensitivity of surface-wave sensors in multifilm structures is proposed based on the results of a theoretical study of the reflection of a plane electromagnetic wave from a flat-layered structure containing homogeneous films. A method for optimizing the parameters of the films forming the surface structure is developed and tested. The devices proposed are characterized by high field amplification in a surface layer of multifilm structure and a higher sensitivity to variations in the optical properties of the thin near-surface layer. Application of the proposed multifilm structures is expected to increase significantly the sensitivity of the existing sensors based on surface-plasmon polaritons, which are applied in modern optical multichannel biological, chemical, and physical sensor systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Calculation of the Schottky barrier and current–voltage characteristics of metal–alloy structures based on silicon carbide

A simple but nonlinear model of the defect density at a metal–semiconductor interface, when a Schottky barrier is formed by surface defects states localized at the interface, is developed. It is shown that taking the nonlinear dependence of the Fermi level on the defect density into account leads to a Schottky barrier increase by 15–25%. The calculated barrier heights are used to analyze the current–voltage characteristics of n-M/p-(SiC){sub 1–x}(AlN){sub x} structures. The results of calculations are compared to experimental data.

36 MATERIALS SCIENCE↗