Search NASA⌕ Search

Engineering topics

Simeni Simeni, Marien

Publications and source records attributed to Simeni Simeni, Marien.

EUV debris mitigation using magnetic nulls

Next generation EUV sources for photolithography use light produced by laser-produced plasmas (LPP) from ablated tin droplets. A major challenge for extending the lifetime of these devices is mitigating damage caused by deposition of tin debris on the sensitive collection mirror. Especially difficult to stop are high energy (up to 10 keV) highly charged tin ions created in the plasma. Existing solutions include the use of stopping gas, electric fields, and magnetic fields. One common configuration consists of a magnetic field perpendicular to the EUV emission direction, but such a system can result in ion populations that are trapped rather than removed. Here we investigate a previously unconsidered mitigation geometry consisting of a magnetic null by performing full-orbit integration of the ion trajectories in an EUV system with realistic dimensions and optimize the coil locations for the null configuration. The magnetic null prevents a fraction of ions from hitting the mirror comparable to that of the perpendicular field, but does not trap any ions due to the chaotic nature of ion trajectories that pass close to the null. This technology can potentially improve LPP-based EUV photolithography system efficiency and lifetime and may allow for a different, more efficient formulation of buffer gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-premixed counterflow methane flames in DC/AC/NS electric fields

The response of counterflow diffusion flames to sub-breakdown DC and AC electric fields, as well as their superposition with ns pulse discharge waveforms, is studied in the plane-to-plane electrode geometry. Sub-breakdown DC and low-frequency AC electric fields cause the flame displacement toward the grounded electrode, in the direction of the applied field, indicating that the body force on the positive ions exceeds that on the electrons and negative ions. As the AC frequency increases, the flame response becomes less pronounced, due to the reduction of the electrohydrodynamic (EHD) body force impulse over the AC half-period. The electric field in the electrode gap is determined by ps Electric Field Induced Second Harmonic (E-FISH) generation, with absolute calibration using sub-breakdown ns pulses overlapped with the measured electric field waveform. The results show that the electric field distribution across the flame in the current saturation regime follows the Laplacian field. This indicates that the space charge density in the gap is too low to distort the applied DC or AC field, consistent with the kinetic modeling predictions. Combining a nanosecond pulse discharge with a sub-breakdown DC field generates a diffuse plasma across the entire gap. Time-resolved and spatially resolved measurements of the electric field in the discharge indicate the ionization wave propagation between the electrodes. The present results do not exhibit a detectable flame displacement enhancement by ns discharge pulses combined with a sub-breakdown field, observed previously. Kinetic modeling calculations show that the absence of this effect in the plane-to-plane geometry is due to the rapid plasma self-shielding. This indicates that alternative electrode geometries limiting the self-shielding would be more effective for the plasma / electric field enhanced flameholding and flame stabilization applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electric field dynamics in an atmospheric pressure helium plasma jet impinging on a substrate

Time and spatially resolved electric field measurements by Stark polarization spectroscopy in a nanosecond pulsed atmospheric pressure helium jet operating in ambient air and impinging on a conductive indium tin oxide (ITO) coated glass slide are reported. An automatic fitting procedure of the Stark shifted spectra taking into consideration constraints regarding Stark components positions and intensities as well as molecular nitrogen emission subtraction was implemented. This allowed electric field vector components measurements both in the gas phase and at the interface when the jet impinges on the substrate and during the development of a surface ionization wave. The obtained results show an increase of the axial electric field in the jet effluent in the gas phase with a peak magnitude from 12 to 18 kVcm -1 before the ionization wave impinges on the substrate. A steep electric field enhancement to a peak value of about 24 kVcm -1 was observed when the ionization wave impinges on the surface. A peak radial electric field of about 27 kVcm -1 was measured off-axis in the surface ionization wave. These results are consistent with previously reported modelling predictions. While Stark polarization spectroscopy is limited to electric field measurement from regions with emission, we illustrate that the capability to measure near surface electric fields in helium makes it a valuable complementary technique for the electric field-induced second harmonic (E-FISH) technique.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hollow plasma structure during the breakdown phase of nanosecond pulsed pin–pin discharges generated with overvoltage

Atmospheric pressure nanosecond repetitive pulsed discharges are of interest for applications in combustion, material processing, plasma medicine and gas treatment. Here, the observation of a hollow structure at the ignition stage of such discharge in a pin–pin geometry is reported. Plasma images show that the phenomenon occurs in a variety of gases (helium, humid helium, argon and air) suggesting that it is in first approximation non-species specific. The phenomenon is investigated in detail in pure helium discharges for peak applied voltages between 3 and 6 kV and 200 ns voltage pulse duration by performing time-resolved optical emission spectroscopy measurements of electron density, gas temperature and electric field. All the measurements were performed at the mid-gap during the early stages of the discharge, near the breakdown. The transition from a homogeneous filament to a hollow structure occurs between 4 and 5 kV in helium. Electron density measurements by Stark broadening of the He I line at 492.2 nm show no significant difference in electron densities for the applied voltage between 3 and 6 kV. In all cases, a maximum electron density of about 3.5 × 10 21 m –3 was found. Electric field measurements performed by Stark polarization spectroscopy of the He I transition at 492.2 nm and of its forbidden counterpart show electric field strengths higher than the DC breakdown field of helium at atmospheric pressure consistent with the generation of the discharges with overvoltage. Moreover, a correlation between electric field values and the appearance of the hollow structure is observed and, remarkably, the phenomenon is not sensitive to the pre-ionization level (memory effect). Possible mechanisms for the phenomenon are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗