Search NASA⌕ Search

Engineering topics

Simmons, G.

Publications and source records attributed to Simmons, G..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Elasticity of some mantle crystal structures. II.

The single-crystal elastic constants are determined as a function of pressure and temperature for rutile structure germanium dioxide (GeO2). The data are qualitatively similar to those of rutile TiO2 measured by Manghnani (1969). The compressibility in the c direction is less than one-half that in the a direction, the pressure derivative of the shear constant is negative, and the pressure derivative of the bulk modulus has a relatively high value of about 6.2. According to an elastic strain energy theory, the negative shear modulus derivative implies that the kinetic barrier to diffusion decreases with increasing pressure.

Wang, H.↗
NASA NTRS1973

Surface electrical properties experiment

The surface electrical properties (SEP) experiment was used to explore the subsurface material of the Apollo 17 landing site by means of electromagnetic radiation. The experiment was designed to detect electrical layering, discrete scattering bodies, and the possible presence of water. From the analysis of the data, it was expected that values of the electrical properties (dielectric constant and loss tangent) of lunar material in situ would be obtained. The basic principle of the SEP experiment is interferometry. This principle involves only the interference of two or more waves to produce an interference pattern. The inversion of the interference pattern in terms of the spatial distribution of the electrical properties is the basic aim of the experiment (fig. 15-1). The experiment is most easily understood in terms of a single dipole antenna for radiating electromagnetic energy and a loop receiver for measuring the magnitudes of the fields.

Simmons, G.↗
NASA NTRS1973

Unique characterization of lunar samples by physical properties

The measurement of compressional velocity, shear velocity, static compressibility, and thermal expansion of (1) a suite of shocked rocks fron the Ries impact in Germany, (2) a suite of samples cracked by thermal cycling to high temperatures, (3) many terrestrial igneous rocks, and (4) lunar basalts, gabbroic anorthosites, and breccias, indicate that shock metamorphism is the primary cause for values of physical properties of lunar rocks being diffferent from their intrinsic values. Large scale thermal metamorphism, thermal cycling between temperatures of lunar day and night, large thermal gradients, or thermal fatigue could possibly cause minor cracking in the top few centimeters of the lunar regolith, but are probably not important mechanism for extensively changing values of physical properties of lunar rocks.-

Todd, T.↗
NASA NTRS1973

Elastic properties of plagioclase aggregates and seismic velocities in the moon

The compressional velocities of Apollo 16 gabbroic anorthosites in which the cracks have been closed match the seismic velocity of 7 km/sec in the 25 to 65 km depth region of the moon beneath the Imbrium Basin. The intrinsic velocities of plagioclase aggregates indicate that a velocity of 7 km/sec in a highly calcic gabbroic anorthosite is consistent only with a very small pyroxene component. Because mare basalts and gabbroic-anorthosites both have intrinsic velocities of 7 km/sec, the laboratory velocity data do not require a compositional change from basalt to anorthosite at the 25 km discontinuity. The laboratory velocity data only imply that the 25 km seismic discontinuity is one of microcrack density. The physical rather than the chemical or mineralogical state is constrained.

Wang, H.↗
NASA NTRS1972

Thermal conductivity of earth materials at high temperatures.

The total thermal conductivity (lattice plus radiative) of several important earth materials is measured in the temperature range from 500 to 1900 K. A new technique is used in which a CO2 laser generates a low-frequency temperature wave at one face of a small disk-shaped sample, and an infrared detector views the opposite face to detect the phase of the emerging radiation. Phase data at several frequencies yield the simultaneous determination of the thermal diffusivity and the mean extinction coefficient of the material. The lattice, radiative, and total thermal conductivities are then calculated. Results for single-crystal and polycrystalline forsterite-rich olivines and an enstatite indicate that, even in relatively pure large-grained material, the radiative conductivity does not increase rapidly with temperature. The predicted maximum total thermal conductivity at a depth of 400 km in an olivine mantle is 0.020 cal/cm/sec/deg C, which is less than twice the surface value.

Schatz, J. F.↗
NASA NTRS1972

Elasticity of some mantle crystal structures. I - Pleonaste and hercynite spinel.

The elasticity of high-pressure mantle phases can be characterized by using data for chemically similar crystal compounds. The single-crystal elastic constants are determined as a function of pressure and temperature for pleonaste spinel and at room conditions for hercynite spinel. The bulk modulus increases from 1.95 Mb for pleonaste spinel to 2.10 Mb for hercynite spinel. Low or negative values of the pressure derivatives of shear constants are characteristic of the spinel structure and imply a low kinetic barrier to phase transformations and diffusion. Compressional and shear velocities of the spinel phase of olivine are estimated as a function of mean atomic weight by using the pleonaste and hercynite data.

Wang, H.↗
NASA NTRS1972

Effect of pore pressure on the velocity of compressional waves in low-porosity rocks.

The velocity V sub p of compressional waves has been measured in rock samples of low porosity to confining pressures P sub c of 2 kb for a number of different constant pore pressures P sub p. An effective pressure defined by P sub e = P sub c-nP sub p, n less than or equal to 1, is found to be the determining factor in the behavior of V sub p rather than an effective pressure defined simply by the differential pressure Delta P = P sub c-P sub p. As pore pressure increases at constant effective pressure, the value of n increases and approaches 1, but as effective pressure increases at constant pore pressure, the value of n decreases. These observations are consistent with Biot's theory of the propagation of elastic waves in a fluid-saturated porous solid.

Todd, T.↗
NASA NTRS1972

Method of simultaneous measurement of radiative and lattice thermal conductivity.

A new technique of high-temperature thermal-conductivity measurement is described. A CO2 gas laser is used to generate a low-frequency temperature wave at one face of a small disk-shaped sample, and an infrared detector views the opposite face to detect the phase of the emerging radiation. A mathematical expression is derived which enables phase data at several frequencies to be used for the simultaneous determination of thermal diffusivity and mean extinction coefficient. Lattice and radiative thermal conductivities are then calculated. Test results for sintered aluminum oxide at temperatures from 530 to 1924 K are within the range of error of previously existing data.

Schatz, J. F.↗
NASA NTRS1972

Elastic properties of alpha quartz and the alkali halides based on an interatomic force model.

A two-body central-force atomic model can be used to describe accurately the elastic properties of alpha quartz if the nontetrahedral O:O forces are included. The strength of the Si:O interaction has little effect on the bulk modulus. The technique is sufficiently general to allow calculations of the elastic properties of a specified structure under arbitrary pressure from a complete description of the interatomic forces. The elastic constants for the NaCl structure and the CsCl structure are examined. Our model includes two-body, central, anion-anion, anion-cation, and electrostatic interactions.

Weidner, D. J.↗
NASA NTRS1972

Thermal property measurements on lunar material returned by Apollo 11 and 12 missions.

Measurement of thermal diffusivity on Apollo 11 type A and type C samples in the temperature range between 150 and 440 K under atmospheric pressure. Thermal diffusivity of type C material is lower and less temperature-dependent than type A material. Both types of samples exhibit lower thermal diffusivities than nonporous terrestrial basalt. The rate of heat generation of Apollo 11 and 12 samples was calculated from the concentrations of radioactive elements: potassium, thorium, and uranium. Apollo 11 crystalline rocks show an average rate of heat generation which is not significantly different from terrestrial basalt. The Th/U ratio does not differ greatly from chondritic and terrestrial averages.

Horai, K.-I.↗
NASA NTRS1972

Lunar portable magnetometer experiment

The purpose of the Apollo 16 lunar portable magnetometer (LPM) experiment is to measure the permanent magnetic field at different geological sites on the lunar surface. The LPM field measurements are a vector sum of the steady remanent field from the lunar crust and of the time-varying ambient fields. The remanent magnetic fields measured in the Descartes region are the largest extraterrestrial fields yet measured in situ. These measurements show for the first time that the Descartes highlands have a stronger remanent magnetization than do the mare regions of the previous Apollo landing sites. The experimental technique used in the LPM experiment is described and the preliminary results obtained are discussed.

Dyal, P.↗
NASA NTRS1972

Elastic properties of Apollo 14 and 15 rocks.

Ultrasonic P- and S-wave velocities of lunar samples 14310,72 and 15418,43 and P-wave velocities of sample 15015,18 were measured at room temperature to 5 kb confining pressure. The velocities of both igneous and breccia samples increased sharply over this pressure range. At low confining pressures, the shape of velocity-pressure curves of rocks is determined by the distribution function of crack aspect ratios. We suggest that analogue studies on terrestrial rocks having a wide assortment of crack parameters may be used to infer the nature of cracks in lunar rocks.

Todd, T.↗
NASA NTRS1972

Thermal expansion of Apollo lunar samples and Fairfax diabase.

Measured values of the thermal expansion of seven Apollo samples over the temperature range -100 C to +200 C are reported and compared to terrestrial Fairfax diabase. For most of the lunar rocks the measured expansion is significantly lower (30%) than the intrinsic value calculated from Turner's equation for the thermal expansion of an aggregate. The measured expansion of the Fairfax diabase was equal to the intrinsic but was higher for samples of Fairfax which had been previously cycled to high temperatures. The effect of microfractures on the thermal expansion of rocks is discussed.

Baldridge, W. S.↗
NASA NTRS1971

On the moon with Apollo 15: A guidebook to Hadley Rille and the Apennine Mountains

Information is given in simple terms of the Apollo 15 lunar exploration and scientific equipment, to be used in conjunction with other material shown over commercial TV. The EVAs of the astronauts on the surface are divided into experiments and traverses. The landing site and experimental equipment are described, and life sketches are given of the crew.

Simmons, G.↗