Simon, Pierre-Clement A

DOE OSTI2024

Kinetic Plasma Simulation in the MOOSE Framework: Verification of Electrostatic Particle In Cell Capabilities

In magnetic confinement nuclear fusion reactors, the interaction between the plasma edge and plasma facing components is extremely important. At the plasma edge, a kinetic representation such as particle-in-cell (rather than a fluid representation) is required to accurately capture the plasma behavior. General purpose particle-in-cell plasma simulation capabilities have been developed in the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework. This new capability is a part of the development of a new MOOSE-based framework for modeling plasma facing components, the Fusion ENergy Integrated multiphys-X (FENIX) framework. In this work, the verification of foundational particle-in-cell capabilities in FENIX is presented. This new plasma simulation capability has three main components: moving particles in discrete steps on the finite element mesh, mapping charge density from the particle's location to the finite element mesh, and solving for the electrostatic potential based on the charge density mapped from particles to the mesh. In this paper, simple verification problems demonstrating each of these new capabilities are presented, and future work includes electromagnetic capabilities and Monte Carlo collisions with neutral gas particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Developing Multiphysics, Integrated, High-Fidelity, Massively Parallel Computational Capabilities for Fusion Applications Using MOOSE

As the need for fusion as a clean, sustainable, and abundant energy source grows internationally, so does the need for multiphysics, computational tools to model, study, and predict the complex interactions between plasma, materials, and engineering processes. These tools have a crucial role to play in solving scientific and engineering challenges and accelerating fusion energy deployment. To address these needs, modeling capabilities should enable massively parallel, multiphysics, fully integrated high-fidelity simulations of fusion systems. Additional attributes, such as being open source and modular while maintaining high software quality assurance standards will maximize impact by ensuring accessibility for all and wide acceptance, rapid expansion and development, as well as reliability, efficiency, and robustness. In this paper, we describe how the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework, which has a track record of success in the fission space thanks to the attributes listed above, can be leveraged in the fusion energy field. We highlight key successes of the MOOSE application in the fission space and describe how MOOSE has been and is being applied to fusion applications in the United States---e.g., Tritium Migration Analysis Program, version 8 (TMAP8), MOOSE Fusion Module, Fusion ENergy Integrated multiphys-X (FENIX)---and the United Kingdom---e.g., AURORA, Achlys, Apollo. These efforts aim to establish a suite of tools that can be further extended to accelerate fusion energy deployment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Investigation of CAD-based Geometry Workflows for Multiphysics Fusion Problems Using OpenMC and MOOSE

Fusion system designs are complex and require intricate and accurate meshes to be properly modeled. In this study, we investigate the use of CAD-based geometry workflows in fusion systems multiphysics problems. A simplified tokamak was introduced and modeled in CAD using a multiphysics coupling of OpenMC Monte Carlo transport and MOOSE heat conduction. The meshed geometry was prepared using direct accelerated geometry Monte Carlo (DAGMC) for particle transport, and a volumetric mesh was also prepared to be used in MOOSE and to tally OpenMC results. Cardinal was used to run OpenMC Monte Carlo particle transport within MOOSE framework. The heat source distribution and tritium production were calculated in OpenMC. The data transfer system was used to transfer heat source and temperature distribution between OpenMC and MOOSE. Two computational studies related to mesh refinement were performed: (1) refining the DAGMC and volumetric meshes used for tallying results and solving heat conduction and (2) only refining the DAGMC particle transport mesh. The refinement of the tally mesh has a much larger effect on the runtime compared to the refinement of the DAGMC particle transport surface mesh.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Challenging Common Assumptions of Thick-Wall Chamber Dynamics in Inertial Fusion Systems Using MOOSE-based Multiphysics Simulations

As an increasing number of companies look toward commercial Inertial Fusion Energy (IFE) designs, there is a pressing need to understand the physics of thick-wall chamber gas dynamics. The thick liquid wall approach implements a renewable wall to mitigate the fusion target emissions, thereby reducing the radiation damage rate and significantly extending the lifetime of chamber structures, leading to increased plant availability and reduced waste streams in comparison to dry wall chamber designs. It is necessary, however, to assess the critical performance and safety aspects of these systems. For example, it is crucial to predict (1) where the mass ablated from the liquid walls will vent, which determines the placement of condensing surfaces; (2) debris propagation up the beam lines, which provides essential information for design and protection requirements; (3) peak pressures and impulse on chamber walls, which affect chamber structural design; and (4) momentum transfer to the liquid jets, which constrains the shape and positioning of the jets. In turn, the chamber design and its liquid walls affect shielding requirements, material activation, and tritium fuel cycle. Currently available simulation tools, however, are unable to accurately capture key thick-wall chamber dynamics. Significant assumptions are often made to simplify the system and reduce computational cost and modeling capability needs, but the impact of these assumptions on simulation predictions has not been evaluated. For example, no three-dimensional simulations can be found in the open literature to evaluate gas venting and momentum transfer to the jets with simulations using two-dimensional domains to represent complex three-dimensional geometries. Moreover, limited studies have been dedicated to jet breakup due to both turbulence and neutron heating, and no studies have been found that evaluate how jet breakup can impact shock-jet interaction. Furthermore, effects of radiative heat transfer have rarely been included for the hydrodynamic phase of shock propagation, and integration of proper equations of state in shock dynamics codes has been mostly exploratory. In this study, we use the flexible, high-fidelity Multiphysics Object-Oriented Simulation Environment (MOOSE) to model these complex phenomena and inform design and safety studies. Capabilities to model thick-wall chamber gas dynamics are being developed, and the impact of the assumptions listed above (i.e., two-dimensional vs three-dimensional, absence of jet breakout, no radiative heat transfer, and ideal gas behavior) are being quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Thermal-Mechanic Modeling of Fusion Components Using The MOOSE Framework

With fusion energy rapidly developing, there is a great need for an open source tool that can rapidly model different fusion tokamak designs. The open-source codes Multiphysics Object Oriented Simulation Environment (MOOSE), Tritium Migration Analysis Program Version 8 (TMAP8) , and Fusion ENergy Integrated Multiphysi-X (FENIX) are being used to demonstrate thermal-mechanic modeling of fusion components. In this study, an analysis is done on the fusion nuclear science facility (FNSF) blanket, and ITER toroidal magnet and diverter mono block. This study will lay the groundwork for fusion component analysis in the MOOSE framework and FENIX program.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

New Developments of FENIX Capabilities for Fusion Neutronics Calculations

This presentation summarizes internship work to support new developments of FENIX Capabilities for fusion neutronics calculations. Two coupled multiphysics models are demonstrated for a tokamak model and monoblock divertor model. Results show heating results, temperature distributions, tritium production and transport. A new feature was added to allow coupling OpenMC models with thermomechanics models and was verified.

99 - GENERAL AND MISCELLANEOUS↗

DOE OSTI2024

New Developments of MOOSE/FENIX Capabilities for Fusion Neutronics Calculations

This poster summarizes internship work to support new developments of MOOSE/FENIX Capabilities for fusion neutronics calculations. A new feature was added to allow coupling OpenMC models with thermomechanics models and was verified. Two coupled multiphysics models are demonstrated for a tokamak model and monoblock divertor model. Results show heating results, temperature distributions, tritium production and transport.

99 - GENERAL AND MISCELLANEOUS↗

DOE OSTI2024

Challenging Common Assumptions of Thick-Wall Chamber Dynamics in Inertial Fusion Systems using MOOSE

As an increasing number of companies look toward commercial Inertial Fusion Energy (IFE) designs, there is a pressing need to understand the physics of thick-wall chamber gas dynamics. The thick liquid wall approach implements a renewable wall to mitigate the fusion target emissions, thereby reducing the radiation damage rate and significantly extending the lifetime of chamber structures, leading to increased plant availability and reduced waste streams in comparison to dry wall chamber designs. It is necessary, however, to assess the critical performance and safety aspects of these systems. For example, it is crucial to predict (1) where the mass ablated from the liquid walls will vent, which determines the placement of condensing surfaces; (2) debris propagation up the beam lines, which provides essential information for design and protection requirements; (3) peak pressures and impulse on chamber walls, which affect chamber structural design; and (4) momentum transfer to the liquid jets, which constrains the shape and positioning of the jets. In turn, the chamber design and its liquid walls affect shielding requirements, material activation, and tritium fuel cycle. Currently available simulation tools, however, are unable to accurately capture key thick-wall chamber dynamics. Significant assumptions are often made to simplify the system and reduce computational cost and modeling capability needs, but the impact of these assumptions on simulation predictions has not been evaluated. For example, no three-dimensional simulations can be found in the open literature to evaluate gas venting and momentum transfer to the jets with simulations using two-dimensional domains to represent complex three-dimensional geometries. Moreover, limited studies have been dedicated to jet breakup due to both turbulence and neutron heating, and no studies have been found that evaluate how jet breakup can impact shock-jet interaction. Furthermore, effects of radiative heat transfer have rarely been included for the hydrodynamic phase of shock propagation, and integration of proper equations of state in shock dynamics codes has been mostly exploratory. In this study, we use the flexible, high-fidelity Multiphysics Object-Oriented Simulation Environment (MOOSE) to model these complex phenomena and inform design and safety studies. Capabilities to model thick-wall chamber gas dynamics are being developed, and the impact of the assumptions listed above (i.e., two-dimensional vs three-dimensional, absence of jet breakout, no radiative heat transfer, and ideal gas behavior) are being quantified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

FENIX: Towards a Fully Integrated Multiphysics Framework for Plasma Facing Component Modeling

Computational tools have a crucial role to play in accelerating the deployment of fusion as a clean, reliable, abundant, and sustainable energy source. Multiphysics, high-fidelity simulation capabilities can help model, study, and predict intricate interactions between materials performance, plasma exposure, neutron irradiation, and engineering processes. As such, they can assist in the resolution of scientific and engineering challenges underpinning design, construction, and commission of fusion power plants. To address these needs, ongoing efforts are leveraging the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework and delivering new computational tools for the fusion community. These tools inherit crucial attributes from MOOSE. They are open-source, modular, integrated with nuclear industry-standard software quality assurance processes, and enable multiphysics, multi-fidelity, fully integrated, zero- to three-dimensional, and massively parallel simulations. After a short overview of these capabilities, we will present the development of Fusion ENergy Integrated multiphys-X (FENIX), a MOOSE-based application designed to enable plasma facing component design and performance evaluation. Throughout their lifetime, plasma facing components are exposed to extreme thermal loads, repeated thermal shocks, and irradiation by plasma ions, neutral particles, and high-energy neutrons. Consequently, designing a plasma facing component with acceptable lifetime degradation is extremely challenging. FENIX aims to model the multiphysics environment in which plasma facing components evolve to accelerate their design studies. To that end, FENIX couples existing MOOSE capabilities such as heat transfer, thermomechanics, and thermal hydraulics, with tritium transport via the MOOSE-based Tritium Migration Analysis Program, Version 8 (TMAP8), with neutronics via the MOOSE-based high-fidelity neutron-photon transport and fluid dynamics code Cardinal, and finally with Particle-in-Cell plasma simulation capabilities being developed in this project. In this study, we present the current FENIX capabilities and preliminary results of its application to model the Tritium Plasma Experiment set up at Idaho National Laboratory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

FENIX: An Open-Source Multiphysics Integrated Framework Enabling Collaborative Development of Plasma Facing Component Modeling Capabilities

Advanced modeling and simulation tools have a crucial role to play in accelerating fusion energy deployment as a sustainable power source. Multiphysics, high-fidelity computational tools can help understand, model, and quantify the complex interactions between materials performance, plasma and neutron exposure, and engineering processes. As a result, they accelerate the design, safety analysis, and performance evaluation of fusion systems. This webinar introduces the Fusion ENergy Integrated multiphys-X (FENIX) framework, an open-source multiphysics tool for plasma facing component modeling. FENIX leverages the Multiphysics Object-Oriented Simulation Environment (MOOSE) framework, which has been developed by the United States Department of Energy Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. FENIX couples various MOOSE capabilities such as heat transfer, thermomechanics, thermal hydraulics, electromagnetics, and plasma kinetics with the MOOSE-based applications Cardinal (neutronics) and TMAP8 (tritium transport). During the webinar, we will present FENIX and discuss how its modularity, openness, software quality assurance processes, and licensing approach supports effective collaborations, including public-private partnerships.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗