Engineering topics

Simonds, C. H.

Publications and source records attributed to Simonds, C. H..

31 records · Page 2

NASA NTRS1976

Heat flow in impact melts - Apollo 17 Station 6 Boulder and some applications to other breccias and xenolith laden melts

The paper presents results of calculations for the cooling of an impact melt, the specific application being the clast-laden sheet sampled in the Apollo 17 Station 6 Boulder. The calculations were carried out using a two-stage cooling model which involves a short initial phase of thermal equilibration between small clasts and the surrounding melt and a second phase of heat loss from the melt sheet to the surroundings.

Onorato, P. I. K.↗

NASA NTRS1976

Lithification of vitric- and clastic-matrix breccias - SEM petrography

A scanning electron microscope was used in a petrographic investigation of the matrix textures of 41 lunar breccias ranging from very friable soil clods through coherent microbreccias and tough vitric breccias to tough, fine-grained crystalline breccias. It was found that as their coherence increases, the matrices display a gradual increase in the content of glass from 1 or 2% as filaments less than 1 micron across through 5-50% as irregularly shaped patches up to 200 microns across to over 50% as continuous networks.

Phinney, W. C.↗

NASA NTRS1976

Thermal model for impact breccia lithification - Manicouagan and the moon

The thermal model of Simonds (1975) is extended to the full spectrum of impact-produced rocks ranging from fragmental breccias to impact melts, with reference to the Manicouagan impact structure in Quebec. This is done by relating the basic textural features of impact-lithified rocks to variations in the mixture of superheated impact-fused material originating near the point of impact and much cooler fragmented debris originating farther from the point of impact.

Simonds, C. H.↗

NASA NTRS1975

Thermal regimes in impact melts and the petrology of the Apollo 17 Station 6 boulder

A progress report is presented on the petrologic study of the Station 6 boulder, taking into account the implications of its petrographic and geochemical studies to the understanding of the processes of formation and crystallization of impact melts. The interpretation of the data from the boulder suggests processes that appear reasonable for a petrogenetic model of impact events large enough to produce a layer of melt a kilometer or more wide and at most a few tens of meters thick. A summary of the model is presented. The primary difference between the new model and the previous models of Warner et al. (1973, 1974) and Simonds et al. (1973, 1974) is that melt and clasts are derived from distinctly different parts of the cratering regime. The cooling is modeled in two steps, first the rapid equilibration between clasts and matrix, and second, the much slower loss of heat to the surroundings.

Simonds, C. H.↗

NASA NTRS1974

Short guide to lunar sample information

Data pertaining to the collection, processing, and study of lunar samples, and the ways to gain access to that data are described. Data pertaining to the samples includes not only the normally published literature but also NASA and USGS interagency documents, sample processing information, and photography taken from lunar orbit, on the lunar surface, and of samples in the Lunar Receiving Laboratory.

Simonds, C. H.↗

NASA NTRS1974

Magnetic properties of Apollo 16 samples and implications for their mode of formation

The Apollo 16 crystalline rocks have a greater average percentage of metallic iron than any other lunar material and are the most reduced in terms of their metallic iron/total iron ratio. They have greater metal content than the mare basalts, the only primary igneous rocks on the moon, and more iron metal than the associated Apollo 16 breccias and soils. This fact and the relatively coarse grain size suggest reduction of the iron during the formation of the crystalline rocks, probably during melts and partial melts in an impact base surge deposit.

Pearce, G. W.↗

NASA NTRS1974

Lunar highland rock types: Their implications for impact induced fractionation

The first step in a petrologic study must be a classification based on observed textures and mineralogy. Lunar rocks, may be classified into three major groups: (1) coarse-grained igneous rocks, (2) fine-grained igneous rocks and (3) breccias. Group 1 is interpreted as primitive lunar crustal rocks that display various degrees of crushing and/or annealing. Group 2 is interpreted as volcanic rocks. Group 3 is interpreted as resulting from impacts on the lunar surface and is subdivided on the basis of matrix textures into fragmental breccias, crystalline breccias that have been annealed, and crystalline breccias with igneous matrices. A synthesis of the relevant data concerning lunar highlands polymict breccias from the fields of petrography, chemistry, photogeology, and impact studies compels the prediction that the breccias should have homogeneous matrices from rock to rock within regions of the highlands of limited size where impact mixing has been efficient and extensive.

Phinney, W. C.↗

NASA NTRS1974

Petrography and classification of Apollo 17 non-mare rocks with emphasis on samples from the Station 6 boulder

The Apollo-17 nonmare rock collection consists largely of polymict breccias lithified by impact and characterized by a variety of types of lithic clasts, concentrations of siderophile elements that indicate substantial meteoritic contamination, and contents of metallic iron well above those of mare basalts. These materials may be subdivided into two compositional groups, one with 70-80% feldspar and the other with 50-60% feldspar. The high-feldspar group includes two characteristic textures: coarsely poikilitic and granulitic. The low-feldspar group includes (1) fragmental breccias with the most diverse lithic clast populations of all breccias and (2) crystalline breccias with poikilitic and subophitic to micropoikilitic textures containing tabular feldspar, granular textures with anhedral feldspar, and clast-rich ophitic textures containing less euhedral feldspar. In the poikilitic and subophitic to micropoikilitic textures, the clast population is dominated by the high-feldspar lithologies and An(94-47) plagioclase grains, indicating that these more refractory lithologies were abundant in the material from which the less feldspathic crystalline rocks formed.

Simonds, C. H.↗

NASA NTRS1974

Impact-induced fractionation in the lunar highlands

A synthesis of the relevant data concerning lunar highland polymict breccias from the fields of petrography, chemistry, photogeology, and impact studies compels the prediction that the breccias should have homogeneous matrices from rock to rock within regions of the highlands of limited size where impact mixing has been efficient and extensive. But the matrices of returned breccias, even from one landing site, display a wide range in composition. This incompatibility between prediction and observation is a paradox that may be resolved by a process that acts after impact mixing to cause a differentiation of the breccia compositions. Partial melting of the local surficial material, and separation of melt and residue in ejecta and/or fall-back blankets, is compatible with the reviewed data and may resolve the paradox.

Warner, J. L.↗

NASA NTRS1973

Preliminary data on boulders at station 6, Apollo 17 landing site

A cluster of boulders at Station 6 (Apollo 17 landing site) consists of breccias derived from the North Massif. Three preliminary lithologic units were established, on the basis of photogeologic interpretations; all lithologies identified photogeologically were sampled. Breccia clasts and matrices studied petrographically and chemically fall into two groups by modal mineralogy: (1) low-K Fra Mauro or high basalt composition, consisting of 50-60% modal feldspar, approximately 45% orthopyroxene and 1-7% Fe-Ti oxide; (2) clasts consisting of highland basalt composition, consisting of 70% feldspar, 30% orthopyroxene and olivine and a trace of Fe-Ti oxide.

Heiken, G. H.↗

NASA NTRS1973

Sintering and hot pressing of Fra Mauro composition glass and the lithification of lunar breccias.

It is proposed that Apollo 14 type breccias lithify by sintering of particles of matrix glass under stress-free conditions. Meteorite impacts generate the heat necessary for sintering. Compacted angular particles of glass with the composition of an Apollo 14 rock were sintered experimentally. Loose clods of sub 37 micron grains form in several days at 700 C. Synthetic rocks, which texturally resemble the breccias, were produced at 795 C and above in 7.5 hours. Glass devitrified with increasing temperature. At 850 C, devitrification prevents much further densification of the synthetic breccias after 2 hours. Experiments compressing glass at 500 bars at 600 C produced dense vitreous masses which did not resemble lunar breccias. Confining pressure does not play a major role in lithifying the breccias. It is concluded that Apollo 14 type lunar breccias form at shallow depths at 800 C+ in a period of minutes to days.

Simonds, C. H.↗

NASA NTRS1973

Apollo 16 rocks - Classification and petrogenetic model

The Apollo 16 rocks include cataclastic anorthosites, two varieties of unequilibrated breccia, two varieties of partly to fully equilibrated breccia, and a sequence of partially melted breccias. The latter, which dominate the Apollo 16 collection, include glass, divitrified glass, mesostasis-olivine-plagioclase rock, mesostasis-rich basalt, basalt, and poikilitic rocks. All sequence members contain vesicles and relics of plagioclase, olivine, pink spinel, and lithic fragments. Their equilibrated matrices define a series from glass, to a plagioclase-olivine-mesostasis assemblage displaying spherulitic and skeletal shaped crystals, through a plagioclase-pyroxene-olivine assemblage displaying euhedral shaped crystals. Such data suggest that the sequence lithologies were derived from breccias or soils that were partially melted in an impact event.

Warner, J. L.↗

NASA NTRS1973

Petrology of Apollo 16 poikilitic rocks

The petrology of 13 poikilitic rocks returned by Apollo 16 is described, and the mechanisms which likely participated in their formation are explained. The specimens include 11 rake samples from stations 1, 4, and 13 and the two large rocks 60315 and 65015. The poikilitic rocks are proposed to form by crystallization of an impact generated partial melt with over 70% liquid. The protolith consists of gas bearing polymict breccias and/or soil.

Simonds, C. H.↗