Search NASA⌕ Search

Engineering topics

Simonin, A

Publications and source records attributed to Simonin, A.

SIPHORE: Conceptual Study of a High Efficiency Neutral Beam Injector Based on Photo-detachment for Future Fusion Reactors

An innovative high efficiency neutral beam injector concept for future fusion reactors is under investigation (simulation and R and D) between several laboratories in France, the goal being to perform a feasibility study for the neutralization of intense high energy (1 MeV) negative ion (NI) beams by photo-detachment.The objective of the proposed project is to put together the expertise of three leading groups in negative ion quantum physics, high power stabilized lasers and neutral beam injectors to perform studies of a new injector concept called SIPHORE (SIngle gap PHOto-neutralizer energy REcovery injector), based on the photo-detachment of negative ions and energy recovery of unneutralised ions; the main feature of SIPHORE being the relevance for the future Fusion reactors (DEMO), where high injector efficiency (up to 70-80%), technological simplicity and cost reduction are key issues to be addressed.The paper presents the on-going developments and simulations around this project, such as, a new concept of ion source which would fit with this injector topology and which could solve the remaining uniformity issue of the large size ion source, and, finally, the presentation of the R and D program in the laboratories (LAC, ARTEMIS) around the photo-neutralization for Siphore.

43 PARTICLE ACCELERATORS↗

Kinetic study of the secondary plasma created in the ITER neutraliser

The properties of the secondary plasma created inside the ITER Neutral Beam Injector (NBI) neutraliser, through the interaction of the high energetic hydrogen beam with the molecular hydrogen gas, have been analysed. Starting from the results of our OBI-2 PIC Monte-Carlo numerical code, detailed kinetic of the hydrogen plasma has been studied using a Collisional-Radiative model. In this model, the electron distribution function is determined by solving a Boltzmann equation, whereas main plasma species are derived from balance equations. This paper presents preliminary results obtained in a 0D geometry, boundary conditions bing introduced through effective rates for gain and loss of particles at the neutraliser walls. It has been found that the main ion specie is H{sub 2}{sup +}, essentially coming from the ionisation of the target gas. The electron energy distribution function is not maxwellian and its mean energy is about 5 eV. The plasma-wall interactions yield a strong contribution, in particular regarding the density of molecular ion H{sub 3}{sup +}. Assuming several independent slices of plasma along the negative ions beam axis, the axial profile of the secondary plasma has been analysed. It has been found that the density and mean energy profiles of the plasma electrons are directly related to the plasma potential profile, which in turn closely follows the gas density one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photo-neutralization of Negative Ion Beam for Future Fusion Reactor

An exploratory study of negative ion beam photo-neutralization for future fusion reactors is explained. A refolded Fabry-Perot cavity system is proposed, with which a 60% neutralisation efficiency could be reached with low electric power consumption. The system would make use of sophisticated optical-cavity locking systems, which have been developed recently for gravitational-wave optical detection. The ITER Neutral beam Injector is taken as an example.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling of an Inductive Negative Ion Source for Neutral Beam Injection

We present a self-consistent two-dimensional model of a high-power inductive plasma source for negative ion production in hydrogen. The model is quasi-neutral and describes the transport and chemistry of different particle species by fluid equations including inertia and viscosity terms, coupled with the electromagnetic fields from the Maxwell equations. Results for typical conditions show a depletion of the neutral density in the plasma center and a possible reduction of wall losses due to the Lorentz force from the driving field at lower frequencies (<20 MHz)

43 PARTICLE ACCELERATORS↗

ITER neutralizer modeling (abstract)

In the neutralizer of the ITER Neutral Beam Injector, a 1 MeV-D{sup -} beam passes through an structure filled with D{sub 2} gas, where negative ions are mainly converted to fast D{sup 0} atoms. Once that the beam is neutralized no further optical correction is possible, i.e., transport from the neutralizer to the confinement chamber is ballistic. Because of this, the transport through the neutralizer determines ultimately the geometrical properties of the neutral beams. The ionization of the buffer gas (D{sub 2}) filling the neutralizer induced by the D beam creates a rarefied and low temperature plasma (ionization degree {approx_equal}10{sup -3}, electron temperature {approx_equal}20 eV). This plasma can screen the electrostatic well of the D beam and, consequently, affect the properties of the extracted beam and the energy transport to the neutralizer walls. On the other hand, the plasma will eventually escape from the neutralizer and move back in the accelerator chain, toward the accelerating grids and the source. We present particle-in-cell simulations of the beam propagation and plasma formation through the neutralizer. Particle-particle and particle-wall collisions are treated using a Monte Carlo approach. Simulations show that the secondary plasma effectively screens the beam space charge preventing beam radial expansion due to Coulomb repulsion between beam ions. First results suggest that the current of plasma ions (D{sub 2}{sup +}) into the accelerator would be of the order of I(D{sup -})/100, with I(D{sup -}) the negative ion current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗