Engineering topics

Simpson, Myles A.

Publications and source records attributed to Simpson, Myles A..

7 records

NASA NTRS2005

High Speed Research Program Structural Acoustics Multi-Year Summary Report

This report summarizes the work conducted by the Structural Acoustics Integrated Technology Development (ITD) Team under NASA's High Speed Research (HSR) Phase II program from 1993 to 1999. It is intended to serve as a reference for future researchers by documenting the results of the interior noise and sonic fatigue technology development activities conducted during this period. For interior noise, these activities included excitation modeling, structural acoustic response modeling, development of passive treatments and active controls, and prediction of interior noise. For sonic fatigue, these activities included loads prediction, materials characterization, sonic fatigue code development, development of response reduction techniques, and generation of sonic fatigue design requirements. Also included are lessons learned and recommendations for future work.

Beier, Theodor H.↗

NASA NTRS1992

Comparison ofdvanced turboprop interior noise control ground and flight test data

Interior noise ground tests conducted on a DC-9 aircraft test section are described. The objectives were to study ground test and analysis techniques for evaluating the effectiveness of interior noise control treatments for advanced turboprop aircraft, and to study the sensitivity of the ground test results to changes in various test conditions. Noise and vibration measurements were conducted under simulated advanced turboprop excitation, for two interior noise control treatment configurations. These ground measurement results were compared with results of earlier UHB (Ultra High Bypass) Demonstrator flight sts with comparable interior treatment configurations. The Demonstrator is an MD-80 test aircraft with the left JT8D engine replaced with a prototype UHB advanced turboprop engine.

Simpson, Myles A.↗

NASA NTRS1992

Experimental and analytical investigations of fuselage modal characteristics and structural-acoustic coupling

Measurements conducted on a DC-9 aircraft test section to define the shell and cavity modes of the fuselage, understand its structural-acoustic coupling characteristics, and measure its response to different types of acoustic and vibration excitations are reported. The data were processed to generate spatial plots and wavenumber maps of the shell acceleration and cabin acoustic pressure field. Analysis and interpretation of the spatial plots and wavenumber maps showed that the only structural-acoustic coupling occurred at 105 Hz between the N=2 circumferential structural mode and the (n=2, p=0) circumferential cavity mode. The fuselage response to vibration excitation was found to be dominated by modes whose order increases with frequency.

Simpson, Myles A.↗

NASA NTRS1992

Structural-acoustic coupling in aircraft fuselage structures

Results of analytical and experimental investigations of structural-acoustic coupling phenomenon in an aircraft fuselage are described. The structural and acoustic cavity modes of DC-9 fuselage were determined using a finite element approach to vibration analysis. Predicted structural and acoustic dispersion curves were used to determine possible occurrences of structural-acoustic coupling for the fuselage. An aft section of DC-9 aircraft fuselage, housed in an anechoic chamber, was used for experimental investigations. The test fuselage was excited by a shaker and vibration response and interior sound field were measured using accelerometer and microphone arrays. The wavenumber-frequency structural and cavity response maps were generated from the measured data. Analysis and interpretation of the spatial plots and wavenumber maps provided the required information on modal characteristics, fuselage response and structural-acoustic coupling.

Mathur, Gopal P.↗

NASA NTRS1990

The use of spatial coherence techniques for identifying noise transmission paths on the MDC-UHB demonstrator aircraft

Application of partial coherence techniques to determination of the transmission paths of sound into an airplane cabin interior has been studied. Accurate quantitative information on the dominant paths of acoustic energy transmission can be obtained with this technique as well as the relative contributions from airborne and structure-borne paths. This information is useful in making design changes in the fuselage to reduce the interior cabin noise. The techniques are successfully applied to noise and vibration data collected during flight tests of the McDonnel Douglas Ultra-High Bypass Demonstrator aircraft, and these results are compared with other data measured during the flight program.

Tran, Boi N.↗

NASA NTRS1989

Interior noise control ground test studies for advanced turboprop aircraft applications

The measurement and analysis procedures are documented, and the results of interior noise control ground tests conducted on a DC-9 aircraft test section are summarized. The objectives of these tests were to study the fuselage response characteristics of treated and untreated aircraft with aft-mount advanced turboprop engines and to analyze the effectiveness of selected noise control treatments in reducing passenger cabin noise on these aircraft. The results of fuselage structural mode surveys, cabin cavity surveys and sound intensity surveys are presented. The performance of various structural and cabin sidewall treatments is assessed, based on measurements of the resulting interior noise levels under simulated advanced turboprop excitation.

Simpson, Myles A.↗

NASA NTRS1989

Cabin noise control ground tests for UHB aircraft

Measurement and analysis procedures for cabin noise control ground tests conducted on a DC-9 aircraft test section are presented along with a summary of test results. These tests were designed to analyze the effectiveness of selected noise control treatments in reducing passenger cabin noise on aircraft with aft-mounted, advanced turboprop engines. The performance of various structural and cabin sidewall treatments is assessed, based on measurements of the resulting interior noise levels and fuselage acceleration levels under simulated advanced turboprop excitation.

Simpson, Myles A.↗